-- (C) COPYRIGHT HP Inc. 2016 -- -- Future Smart MIB. -- -- Published in July 2016 -- -- Company names and product names mentioned herein may be -- trademarks, and/or registered trademarks of their respective -- companies. -- -- Consolidated Future Smart MIB v1.3. -- Last Updated: -- May 29, 2022: jelmd - better support for HP LJ M750 (DL3A09) -- -- This MIB describes all the HP propreitary -- objects supported by Future Smart devices -- when networked connected using a JetDirect print -- server. -- -- This MIB complies with the following RFCs: -- -- rfc 1157 Simple Network Management Protocol -- rfc 1155 Structure of Management Information -- -- Notes: -- -- 1) Objects containing a string which are defined in this MIB use the -- first two bytes to hold the symbol set used to encode the string. -- The Roman-8 symbol set has a hex encoding of 0x0115. Other -- symbol sets are listed in the PCL 5 Comparison Guide in table -- C-1 Symbol Set Values. -- -- 2) Some of the objects included are only supported if an accessory -- is installed. These accessories include: -- MIO based accessories -- SIMM based accessories -- AT hard disk -- Paper handling accessories -- Adobe PostScript accessory -- 3) Supported items on a specific device are based on the device's functions & capabilities. FUTURESMART3a-MIB DEFINITIONS ::= BEGIN hp OBJECT IDENTIFIER ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) 11} dm OBJECT IDENTIFIER ::= { hp nm(2) hpsystem(3) net-peripheral(9) netdm(4) 2} DisplayString ::= OCTET STRING device OBJECT IDENTIFIER ::= { dm 1 } device-system OBJECT IDENTIFIER ::= { device 1 } status-system OBJECT IDENTIFIER ::= { device-system 2 } test OBJECT IDENTIFIER ::= { device-system 5 } job OBJECT IDENTIFIER ::= { device-system 6 } job-info OBJECT IDENTIFIER ::= { job 5 } job-info-accounting OBJECT IDENTIFIER ::= { job-info 28 } processing-subsystem OBJECT IDENTIFIER ::= { device 3 } pml OBJECT IDENTIFIER ::= { processing-subsystem 4 } accounting OBJECT IDENTIFIER ::= { device-system 16 } printer-accounting OBJECT IDENTIFIER ::= { accounting 1 } printed-media-usage OBJECT IDENTIFIER ::= { printer-accounting 1 } printer-color-accounting OBJECT IDENTIFIER ::= { accounting 3 } printed-media-color-usage OBJECT IDENTIFIER ::= { printer-color-accounting 1 } printed-modes-accounting OBJECT IDENTIFIER ::= { accounting 4 } printed-modes-usage OBJECT IDENTIFIER ::= { printed-modes-accounting 1 } source-tray-accounting OBJECT IDENTIFIER ::= { accounting 5 } source-tray-usage OBJECT IDENTIFIER ::= { source-tray-accounting 1 } destination-bin-accounting OBJECT IDENTIFIER ::= { accounting 6 } destination-bin-usage OBJECT IDENTIFIER ::= { destination-bin-accounting 1 } destination-subsystem OBJECT IDENTIFIER ::= { device 4 } print-engine OBJECT IDENTIFIER ::= { destination-subsystem 1 } print-media OBJECT IDENTIFIER ::= { print-engine 8 } media-size OBJECT IDENTIFIER ::= { print-media 5 } background-message OBJECT IDENTIFIER ::= { status-system 37 } background-message1 OBJECT IDENTIFIER ::= { background-message 1 } background-message2 OBJECT IDENTIFIER ::= { background-message 2 } menus OBJECT IDENTIFIER ::= { print-engine 13 } menus-test OBJECT IDENTIFIER ::= { menus 1 } control-panel-display OBJECT IDENTIFIER ::= { status-system 65 } settings-system OBJECT IDENTIFIER ::= { device-system 1 } id OBJECT IDENTIFIER ::= { device-system 3 } interface OBJECT IDENTIFIER ::= { device-system 4 } imaging OBJECT IDENTIFIER ::= { print-engine 6 } simm OBJECT IDENTIFIER ::= { interface 1 } simm1 OBJECT IDENTIFIER ::= { simm 1 } simm1-bank OBJECT IDENTIFIER ::= { simm1 6 } simm1-bank1 OBJECT IDENTIFIER ::= { simm1-bank 1 } simm1-bank2 OBJECT IDENTIFIER ::= { simm1-bank 2 } simm2 OBJECT IDENTIFIER ::= { simm 2 } simm2-bank OBJECT IDENTIFIER ::= { simm2 6 } simm2-bank1 OBJECT IDENTIFIER ::= { simm2-bank 1 } simm2-bank2 OBJECT IDENTIFIER ::= { simm2-bank 2 } simm3 OBJECT IDENTIFIER ::= { simm 3 } simm3-bank OBJECT IDENTIFIER ::= { simm3 6 } simm3-bank1 OBJECT IDENTIFIER ::= { simm3-bank 1 } simm3-bank2 OBJECT IDENTIFIER ::= { simm3-bank 2 } simm4 OBJECT IDENTIFIER ::= { simm 4 } simm4-bank OBJECT IDENTIFIER ::= { simm4 6 } simm4-bank1 OBJECT IDENTIFIER ::= { simm4-bank 1 } simm4-bank2 OBJECT IDENTIFIER ::= { simm4-bank 2 } settings-job OBJECT IDENTIFIER ::= { job 1 } operating-system OBJECT IDENTIFIER ::= { device-system 19 } phd OBJECT IDENTIFIER ::= { interface 5 } phd1 OBJECT IDENTIFIER ::= { phd 1 } phd2 OBJECT IDENTIFIER ::= { phd 2 } phd3 OBJECT IDENTIFIER ::= { phd 3 } phd4 OBJECT IDENTIFIER ::= { phd 4 } phd5 OBJECT IDENTIFIER ::= { phd 5 } phd6 OBJECT IDENTIFIER ::= { phd 6 } pdl OBJECT IDENTIFIER ::= { processing-subsystem 3 } settings-pdl OBJECT IDENTIFIER ::= { pdl 1 } status-pdl OBJECT IDENTIFIER ::= { pdl 2 } errorlog OBJECT IDENTIFIER ::= { device-system 11 } error1 OBJECT IDENTIFIER ::= { errorlog 1 } error2 OBJECT IDENTIFIER ::= { errorlog 2 } error3 OBJECT IDENTIFIER ::= { errorlog 3 } error4 OBJECT IDENTIFIER ::= { errorlog 4 } error5 OBJECT IDENTIFIER ::= { errorlog 5 } error6 OBJECT IDENTIFIER ::= { errorlog 6 } error7 OBJECT IDENTIFIER ::= { errorlog 7 } error8 OBJECT IDENTIFIER ::= { errorlog 8 } error9 OBJECT IDENTIFIER ::= { errorlog 9 } error10 OBJECT IDENTIFIER ::= { errorlog 10 } error11 OBJECT IDENTIFIER ::= { errorlog 11 } error12 OBJECT IDENTIFIER ::= { errorlog 12 } error13 OBJECT IDENTIFIER ::= { errorlog 13 } error14 OBJECT IDENTIFIER ::= { errorlog 14 } error15 OBJECT IDENTIFIER ::= { errorlog 15 } error16 OBJECT IDENTIFIER ::= { errorlog 16 } error17 OBJECT IDENTIFIER ::= { errorlog 17 } error18 OBJECT IDENTIFIER ::= { errorlog 18 } error19 OBJECT IDENTIFIER ::= { errorlog 19 } error20 OBJECT IDENTIFIER ::= { errorlog 20 } error21 OBJECT IDENTIFIER ::= { errorlog 21 } error22 OBJECT IDENTIFIER ::= { errorlog 22 } error23 OBJECT IDENTIFIER ::= { errorlog 23 } error24 OBJECT IDENTIFIER ::= { errorlog 24 } error25 OBJECT IDENTIFIER ::= { errorlog 25 } error26 OBJECT IDENTIFIER ::= { errorlog 26 } error27 OBJECT IDENTIFIER ::= { errorlog 27 } error28 OBJECT IDENTIFIER ::= { errorlog 28 } error29 OBJECT IDENTIFIER ::= { errorlog 29 } error30 OBJECT IDENTIFIER ::= { errorlog 30 } error31 OBJECT IDENTIFIER ::= { errorlog 31 } error32 OBJECT IDENTIFIER ::= { errorlog 32 } error33 OBJECT IDENTIFIER ::= { errorlog 33 } error34 OBJECT IDENTIFIER ::= { errorlog 34 } error35 OBJECT IDENTIFIER ::= { errorlog 35 } error36 OBJECT IDENTIFIER ::= { errorlog 36 } error37 OBJECT IDENTIFIER ::= { errorlog 37 } error38 OBJECT IDENTIFIER ::= { errorlog 38 } error39 OBJECT IDENTIFIER ::= { errorlog 39 } error40 OBJECT IDENTIFIER ::= { errorlog 40 } error41 OBJECT IDENTIFIER ::= { errorlog 41 } error42 OBJECT IDENTIFIER ::= { errorlog 42 } error43 OBJECT IDENTIFIER ::= { errorlog 43 } error44 OBJECT IDENTIFIER ::= { errorlog 44 } error45 OBJECT IDENTIFIER ::= { errorlog 45 } error46 OBJECT IDENTIFIER ::= { errorlog 46 } error47 OBJECT IDENTIFIER ::= { errorlog 47 } error48 OBJECT IDENTIFIER ::= { errorlog 48 } error49 OBJECT IDENTIFIER ::= { errorlog 49 } error50 OBJECT IDENTIFIER ::= { errorlog 50 } error51 OBJECT IDENTIFIER ::= { errorlog 51 } error52 OBJECT IDENTIFIER ::= { errorlog 52 } error53 OBJECT IDENTIFIER ::= { errorlog 53 } error54 OBJECT IDENTIFIER ::= { errorlog 54 } error55 OBJECT IDENTIFIER ::= { errorlog 55 } error56 OBJECT IDENTIFIER ::= { errorlog 56 } error57 OBJECT IDENTIFIER ::= { errorlog 57 } error58 OBJECT IDENTIFIER ::= { errorlog 58 } error59 OBJECT IDENTIFIER ::= { errorlog 59 } error60 OBJECT IDENTIFIER ::= { errorlog 60 } error61 OBJECT IDENTIFIER ::= { errorlog 61 } error62 OBJECT IDENTIFIER ::= { errorlog 62 } error63 OBJECT IDENTIFIER ::= { errorlog 63 } error64 OBJECT IDENTIFIER ::= { errorlog 64 } error65 OBJECT IDENTIFIER ::= { errorlog 65 } error66 OBJECT IDENTIFIER ::= { errorlog 66 } error67 OBJECT IDENTIFIER ::= { errorlog 67 } error68 OBJECT IDENTIFIER ::= { errorlog 68 } error69 OBJECT IDENTIFIER ::= { errorlog 69 } error70 OBJECT IDENTIFIER ::= { errorlog 70 } error71 OBJECT IDENTIFIER ::= { errorlog 71 } error72 OBJECT IDENTIFIER ::= { errorlog 72 } error73 OBJECT IDENTIFIER ::= { errorlog 73 } error74 OBJECT IDENTIFIER ::= { errorlog 74 } error75 OBJECT IDENTIFIER ::= { errorlog 75 } error76 OBJECT IDENTIFIER ::= { errorlog 76 } error77 OBJECT IDENTIFIER ::= { errorlog 77 } error78 OBJECT IDENTIFIER ::= { errorlog 78 } error79 OBJECT IDENTIFIER ::= { errorlog 79 } error80 OBJECT IDENTIFIER ::= { errorlog 80 } error81 OBJECT IDENTIFIER ::= { errorlog 81 } error82 OBJECT IDENTIFIER ::= { errorlog 82 } error83 OBJECT IDENTIFIER ::= { errorlog 83 } error84 OBJECT IDENTIFIER ::= { errorlog 84 } error85 OBJECT IDENTIFIER ::= { errorlog 85 } error86 OBJECT IDENTIFIER ::= { errorlog 86 } error87 OBJECT IDENTIFIER ::= { errorlog 87 } error88 OBJECT IDENTIFIER ::= { errorlog 88 } error89 OBJECT IDENTIFIER ::= { errorlog 89 } error90 OBJECT IDENTIFIER ::= { errorlog 90 } channel OBJECT IDENTIFIER ::= { device 6 } display OBJECT IDENTIFIER ::= { status-system 20 } display-status OBJECT IDENTIFIER ::= { display 1 } web-server OBJECT IDENTIFIER ::= { interface 6 } settings-web-server OBJECT IDENTIFIER ::= { web-server 1 } pdl-postscript OBJECT IDENTIFIER ::= { pdl 4 } webserver-proc-sub OBJECT IDENTIFIER ::= { processing-subsystem 9 } settings-webserver OBJECT IDENTIFIER ::= { webserver-proc-sub 1 } settings-prt-eng OBJECT IDENTIFIER ::= { print-engine 1 } intray OBJECT IDENTIFIER ::= { print-engine 3 } settings-intray OBJECT IDENTIFIER ::= { intray 1 } ph OBJECT IDENTIFIER ::= { print-engine 7 } settings-ph OBJECT IDENTIFIER ::= { ph 1 } print-engine-test OBJECT IDENTIFIER ::= { print-engine 9 } pdl-pcl OBJECT IDENTIFIER ::= { pdl 3 } pdl-pdf OBJECT IDENTIFIER ::= { pdl 15 } socket-ping OBJECT IDENTIFIER ::= { interface 7 } active-print-jobs OBJECT IDENTIFIER ::= { job 2 } job-being-parsed OBJECT IDENTIFIER ::= { active-print-jobs 1 } job-info-attribute OBJECT IDENTIFIER ::= { job-info 23 } held-job OBJECT IDENTIFIER ::= { job 7 } held-job-info OBJECT IDENTIFIER ::= { held-job 1 } held-job-control OBJECT IDENTIFIER ::= { held-job 2 } source-subsystem OBJECT IDENTIFIER ::= { device 2 } spooler OBJECT IDENTIFIER ::= { source-subsystem 4 } settings-spooler OBJECT IDENTIFIER ::= { spooler 1 } pjl OBJECT IDENTIFIER ::= { processing-subsystem 5 } mio OBJECT IDENTIFIER ::= { interface 3 } mio1 OBJECT IDENTIFIER ::= { mio 1 } mio2 OBJECT IDENTIFIER ::= { mio 2 } mio3 OBJECT IDENTIFIER ::= { mio 3 } mio4 OBJECT IDENTIFIER ::= { mio 4 } usb-interface OBJECT IDENTIFIER ::= { interface 9 } usb OBJECT IDENTIFIER ::= { usb-interface 2 } io OBJECT IDENTIFIER ::= { source-subsystem 1 } settings-io OBJECT IDENTIFIER ::= { io 1 } ports OBJECT IDENTIFIER ::= { io 3 } port1 OBJECT IDENTIFIER ::= { ports 1 } foreign-interface OBJECT IDENTIFIER ::= { interface 8 } fax-proc-sub OBJECT IDENTIFIER ::= { processing-subsystem 7 } settings-fax-proc-sub OBJECT IDENTIFIER ::= { fax-proc-sub 1 } status-fax-proc-sub OBJECT IDENTIFIER ::= { fax-proc-sub 2 } tables OBJECT IDENTIFIER ::= { device 7 } channel-table OBJECT IDENTIFIER ::= { tables 2 } channel-entry OBJECT IDENTIFIER ::= { channel-table 1 } remote-procedure-call OBJECT IDENTIFIER ::= { device-system 13 } settings-rpc OBJECT IDENTIFIER ::= { remote-procedure-call 1 } status-rpc OBJECT IDENTIFIER ::= { remote-procedure-call 2 } file-system OBJECT IDENTIFIER ::= { device-system 10 } settings-file-system OBJECT IDENTIFIER ::= { file-system 1 } resource-manager OBJECT IDENTIFIER ::= { device-system 12 } mass-storage-resources OBJECT IDENTIFIER ::= { resource-manager 3 } mass-storage-block-driver OBJECT IDENTIFIER ::= { device-system 15 } settings-mass-storage-bd OBJECT IDENTIFIER ::= { mass-storage-block-driver 1 } status-mass-storage-bd OBJECT IDENTIFIER ::= { mass-storage-block-driver 2 } settings-print-media OBJECT IDENTIFIER ::= { print-media 1 } media-info OBJECT IDENTIFIER ::= { print-media 3 } media1 OBJECT IDENTIFIER ::= { media-info 1 } media2 OBJECT IDENTIFIER ::= { media-info 2 } media3 OBJECT IDENTIFIER ::= { media-info 3 } media4 OBJECT IDENTIFIER ::= { media-info 4 } media5 OBJECT IDENTIFIER ::= { media-info 5 } media6 OBJECT IDENTIFIER ::= { media-info 6 } media7 OBJECT IDENTIFIER ::= { media-info 7 } media8 OBJECT IDENTIFIER ::= { media-info 8 } media9 OBJECT IDENTIFIER ::= { media-info 9 } media10 OBJECT IDENTIFIER ::= { media-info 10 } media11 OBJECT IDENTIFIER ::= { media-info 11 } media12 OBJECT IDENTIFIER ::= { media-info 12 } media13 OBJECT IDENTIFIER ::= { media-info 13 } media14 OBJECT IDENTIFIER ::= { media-info 14 } media15 OBJECT IDENTIFIER ::= { media-info 15 } media16 OBJECT IDENTIFIER ::= { media-info 16 } media17 OBJECT IDENTIFIER ::= { media-info 17 } media18 OBJECT IDENTIFIER ::= { media-info 18 } media19 OBJECT IDENTIFIER ::= { media-info 19 } media20 OBJECT IDENTIFIER ::= { media-info 20 } media21 OBJECT IDENTIFIER ::= { media-info 21 } media22 OBJECT IDENTIFIER ::= { media-info 22 } media23 OBJECT IDENTIFIER ::= { media-info 23 } media24 OBJECT IDENTIFIER ::= { media-info 24 } media25 OBJECT IDENTIFIER ::= { media-info 25 } media26 OBJECT IDENTIFIER ::= { media-info 26 } media27 OBJECT IDENTIFIER ::= { media-info 27 } media28 OBJECT IDENTIFIER ::= { media-info 28 } media29 OBJECT IDENTIFIER ::= { media-info 29 } media30 OBJECT IDENTIFIER ::= { media-info 30 } media31 OBJECT IDENTIFIER ::= { media-info 31 } media32 OBJECT IDENTIFIER ::= { media-info 32 } media33 OBJECT IDENTIFIER ::= { media-info 33 } media34 OBJECT IDENTIFIER ::= { media-info 34 } media35 OBJECT IDENTIFIER ::= { media-info 35 } media36 OBJECT IDENTIFIER ::= { media-info 36 } media37 OBJECT IDENTIFIER ::= { media-info 37 } media38 OBJECT IDENTIFIER ::= { media-info 38 } media39 OBJECT IDENTIFIER ::= { media-info 39 } media40 OBJECT IDENTIFIER ::= { media-info 40 } media41 OBJECT IDENTIFIER ::= { media-info 41 } media-types OBJECT IDENTIFIER ::= { print-media 8 } media-sizes OBJECT IDENTIFIER ::= { print-engine 15 } print-meter OBJECT IDENTIFIER ::= { print-engine 11 } printer-average OBJECT IDENTIFIER ::= { print-meter 1 } device-configure OBJECT IDENTIFIER ::= { settings-system 32 } marking-agent-density OBJECT IDENTIFIER ::= { settings-prt-eng 9 } status-prt-eng OBJECT IDENTIFIER ::= { print-engine 2 } printer-calibration-dhalf OBJECT IDENTIFIER ::= { status-prt-eng 37 } printer-cal-dhalf-data OBJECT IDENTIFIER ::= { printer-calibration-dhalf 3 } printer-cal-grayaxis OBJECT IDENTIFIER ::= { printer-calibration-dhalf 6 } printer-cal-grayaxis-data OBJECT IDENTIFIER ::= { printer-calibration-dhalf 7 } printer-calibration-cpr OBJECT IDENTIFIER ::= { status-prt-eng 38 } intrays OBJECT IDENTIFIER ::= { intray 3 } intray1 OBJECT IDENTIFIER ::= { intrays 1 } intray2 OBJECT IDENTIFIER ::= { intrays 2 } intray3 OBJECT IDENTIFIER ::= { intrays 3 } intray5 OBJECT IDENTIFIER ::= { intrays 5 } intray6 OBJECT IDENTIFIER ::= { intrays 6 } outbin OBJECT IDENTIFIER ::= { print-engine 4 } settings-outbin OBJECT IDENTIFIER ::= { outbin 1 } outbins OBJECT IDENTIFIER ::= { outbin 3 } outbin1 OBJECT IDENTIFIER ::= { outbins 1 } marking-agent OBJECT IDENTIFIER ::= { print-engine 5 } settings-marking-agent OBJECT IDENTIFIER ::= { marking-agent 1 } ph-devices OBJECT IDENTIFIER ::= { ph 3 } ph2 OBJECT IDENTIFIER ::= { ph-devices 2 } media-modes OBJECT IDENTIFIER ::= { print-media 4 } media-counts OBJECT IDENTIFIER ::= { print-media 7 } consumables OBJECT IDENTIFIER ::= { print-engine 10 } consumables-1 OBJECT IDENTIFIER ::= { consumables 1 } consumable-status OBJECT IDENTIFIER ::= { consumables-1 1 } consumable-string OBJECT IDENTIFIER ::= { consumables 8 } consumables-status OBJECT IDENTIFIER ::= { consumables 5 } consumables-life OBJECT IDENTIFIER ::= { consumables-status 1 } firmware-download OBJECT IDENTIFIER ::= { device-system 18 } upgradable-devices OBJECT IDENTIFIER ::= { device-system 20 } warninglog OBJECT IDENTIFIER ::= { device-system 22 } warning1 OBJECT IDENTIFIER ::= { warninglog 1 } warning2 OBJECT IDENTIFIER ::= { warninglog 2 } warning3 OBJECT IDENTIFIER ::= { warninglog 3 } warning4 OBJECT IDENTIFIER ::= { warninglog 4 } warning5 OBJECT IDENTIFIER ::= { warninglog 5 } warning6 OBJECT IDENTIFIER ::= { warninglog 6 } warning7 OBJECT IDENTIFIER ::= { warninglog 7 } warning8 OBJECT IDENTIFIER ::= { warninglog 8 } warning9 OBJECT IDENTIFIER ::= { warninglog 9 } warning10 OBJECT IDENTIFIER ::= { warninglog 10 } warning11 OBJECT IDENTIFIER ::= { warninglog 11 } warning12 OBJECT IDENTIFIER ::= { warninglog 12 } warning13 OBJECT IDENTIFIER ::= { warninglog 13 } warning14 OBJECT IDENTIFIER ::= { warninglog 14 } warning15 OBJECT IDENTIFIER ::= { warninglog 15 } warning16 OBJECT IDENTIFIER ::= { warninglog 16 } warning17 OBJECT IDENTIFIER ::= { warninglog 17 } warning18 OBJECT IDENTIFIER ::= { warninglog 18 } warning19 OBJECT IDENTIFIER ::= { warninglog 19 } warning20 OBJECT IDENTIFIER ::= { warninglog 20 } warning21 OBJECT IDENTIFIER ::= { warninglog 21 } warning22 OBJECT IDENTIFIER ::= { warninglog 22 } warning23 OBJECT IDENTIFIER ::= { warninglog 23 } warning24 OBJECT IDENTIFIER ::= { warninglog 24 } warning25 OBJECT IDENTIFIER ::= { warninglog 25 } warning26 OBJECT IDENTIFIER ::= { warninglog 26 } warning27 OBJECT IDENTIFIER ::= { warninglog 27 } warning28 OBJECT IDENTIFIER ::= { warninglog 28 } warning29 OBJECT IDENTIFIER ::= { warninglog 29 } warning30 OBJECT IDENTIFIER ::= { warninglog 30 } warning31 OBJECT IDENTIFIER ::= { warninglog 31 } warning32 OBJECT IDENTIFIER ::= { warninglog 32 } warning33 OBJECT IDENTIFIER ::= { warninglog 33 } warning34 OBJECT IDENTIFIER ::= { warninglog 34 } warning35 OBJECT IDENTIFIER ::= { warninglog 35 } warning36 OBJECT IDENTIFIER ::= { warninglog 36 } warning37 OBJECT IDENTIFIER ::= { warninglog 37 } warning38 OBJECT IDENTIFIER ::= { warninglog 38 } warning39 OBJECT IDENTIFIER ::= { warninglog 39 } warning40 OBJECT IDENTIFIER ::= { warninglog 40 } warning41 OBJECT IDENTIFIER ::= { warninglog 41 } warning42 OBJECT IDENTIFIER ::= { warninglog 42 } warning43 OBJECT IDENTIFIER ::= { warninglog 43 } warning44 OBJECT IDENTIFIER ::= { warninglog 44 } warning45 OBJECT IDENTIFIER ::= { warninglog 45 } warning46 OBJECT IDENTIFIER ::= { warninglog 46 } warning47 OBJECT IDENTIFIER ::= { warninglog 47 } warning48 OBJECT IDENTIFIER ::= { warninglog 48 } warning49 OBJECT IDENTIFIER ::= { warninglog 49 } warning50 OBJECT IDENTIFIER ::= { warninglog 50 } security OBJECT IDENTIFIER ::= { device-system 23 } settings-security OBJECT IDENTIFIER ::= { security 1 } scanner OBJECT IDENTIFIER ::= { source-subsystem 2 } settings-scanner OBJECT IDENTIFIER ::= { scanner 1 } status-scanner OBJECT IDENTIFIER ::= { scanner 2 } print-meter-usage OBJECT IDENTIFIER ::= { printer-accounting 14 } scanner-accounting OBJECT IDENTIFIER ::= { accounting 2 } scanned-media-usage OBJECT IDENTIFIER ::= { scanner-accounting 1 } settings-system2 OBJECT IDENTIFIER ::= { device-system 25} perm-store-init-occurred OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object will set the cAllPermDevices bit when a full perm storage initialization occurs (as would be the case for a brand new system or as a result of a powerup key sequence or PE-TEST-POWERUP-KEY-SEQUENCE object request). If only one device was initialized (as would be the case if a disk were added to an existing system or a formatter were swapped out), then only the appropriate collection bits will be returned. If there are no collection bits set then this indicates that no initialization took place." ::= { status-system 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.2 channel-bytes-sent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The low order 31 bits of the number of bytes sent from the printer to the host on this logical channel." ::= { channel-entry 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.3 channel-bytes-received OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The low order 31 bits of the number of bytes received by the printer from the host on this logical channel." ::= { channel-entry 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.4 channel-io-errors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The low order 31 bits of the number of I/O errors which have occured on this logical channel." ::= { channel-entry 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.5 channel-jobs-received OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The low order 31 bits of the number of print jobs which have been received on this logical channel." ::= { channel-entry 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.6 channel-mio OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The number of the MIO card associated with this logical channel. If this logical channel is not associated with an MIO card a zero is returned. The value returned for each logical channel is the MIO card's physical slot number. The list of supported values should be documented in the device POS. Additional information: The value returned will be zero for channels 1..3. If an MIOA card is installed, channels 4..10 will return a value of one or two. If an MIOB card is installed, channels 11..17 will return a value of one or two but not the same as channels 4..10. When two IIO cards are installed, the value returned by any channel 4..17 may change after the printer is power cycled." ::= { channel-entry 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 date-and-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte day; /* day: 1 to 31 */ ubyte wday; /* Day of week: 1 to 07 */ ubyte hr; /* hour: 0 to 23 */ ubyte min; /* minute: 0 to 59 */ ubyte sec; /* second: 0 to 59 */ } date_t; where ubyte is an unsigned byte (0-255)." ::= { status-system 17 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 automatic-daylight-savings OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION "Determines whether or not the automatic adjustment for daylight savings time is enabled. If it's enabled the device local time will be automatically adjusted for DST period." ::= { status-system 100 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 daylight-savings-start OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "A C structure containing the following fields: typedef struct { ubyte hour; /* hour: 0 to 23 */ ubyte weekday; /* weekday: 0(Sunday) to 6 */ ubyte occurrence; /* occurrence in the month: 1 to 5 */ ubyte month; /* month: 1 to 12 */ } dst; where ubyte is an unsigned byte (0-255)." ::= { status-system 101 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 daylight-savings-end OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "A C structure containing the following fields: typedef struct { ubyte hour; /* hour: 0 to 23 */ ubyte weekday; /* weekday: 0(Sunday) to 6 */ ubyte occurrence; /* occurrence in the month: 1 to 5 */ ubyte month; /* month: 1 to 12 */ } dst; where ubyte is an unsigned byte (0-255)." ::= { status-system 102 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 daylight-savings-offset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Controls the offset in minutes to be added to the time when DST is in effect." ::= { status-system 103 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 daylight-savings-reset OBJECT-TYPE SYNTAX INTEGER { eResetToDefault(1), eCustomized(2) } ACCESS read-write STATUS optional DESCRIPTION "This object is used to reset (set back to factory default for the current time zone) or read the current status of the DST settings. When Set to eResetToDefault, this object can be used to reset all the DST related objects back to their factory default values. Setting this object with an INTEGER value of eCustomized has no effect. When a Get operation is performed on this object it will return a value eResetToDefault if all DST settings are still set to they factory value. It will return eCustomized if any DST parameter has been set to a custom value." ::= { status-system 104 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 rtc-time-zone OBJECT-TYPE SYNTAX INTEGER { eTzDateline(1), eTzSamoa(2), eTzHawaiian(3), eTzAlaskan(4), eTzPacific(5), eTzUSMountain(6), eTzMexico2(7), eTzMountain(8), eTzCentralAmerica(9), eTzCentral(10), eTzMexico(11), eTzCanadaCentral(12), eTzSAPacific(13), eTzEastern(14), eTzUSEastern(15), eTzAtlantic(16), eTzSAWestern(17), eTzPacificSA(18), eTzNewfoundland(19), eTzESouthAmerica(20), eTzSAEastern(21), eTzGreenland(22), eTzMidAtlantic(23), eTzAzores(24), eTzCapeVerde(25), eTzGreenwich(26), eTzGMT(27), eTzWEurope(28), eTzCentralEurope(29), eTzRomance(30), eTzCentralEuropean(31), eTzWCentralAfrica(32), eTzGTB(33), eTzEeurope(34), eTzEgypt(35), eTzSouthAfrica(36), eTzFLE(37), eTzJerusalem(38), eTzArabic(39), eTzArab(40), eTzRussian(41), eTzEAfrica(42), eTzIran(43), eTzArabian(44), eTzCaucasus(45), eTzAfghanistan(46), eTzEkaterinburg(47), eTzWestAsia(48), eTzIndia(49), eTzNepal(50), eTzNCentralAsia(51), eTzCentralAsia(52), eTzSriLanka(53), eTzMyanmar(54), eTzSEAsia(55), eTzNorthAsia(56), eTzChina(57), eTzNorthAsiaEast(58), eTzMalayPeninsula(59), eTzWAustralia(60), eTzTaipei(61), eTzTokyo(62), eTzKorea(63), eTzYakutsk(64), eTzCenAustralia(65), eTzAUSCentral(66), eTzEAustralia(67), eTzAUSEastern(68), eTzWestPacific(69), eTzTasmania(70), eTzVladivostok(71), eTzCentralPacific(72), eTzNewZealand(73), eTzFiji(74), eTzTonga(75) } ACCESS read-write STATUS optional DESCRIPTION "Controls the time zone, which can be chosen from a list of time zones similar to the one used by Microsoft Windows operating system: eTzDateline -12:00 International Date Line West eTzSamoa -11:00 Midway Island, Samoa eTzHawaiian -10:00 Hawaii eTzAlaskan -09:00 Alaska eTzPacific -08:00 Pacific Time (US & Canada); Tijuana eTzUSMountain -07:00 Arizona eTzMexico2 -07:00 Chihuahua, La Paz, Mazatlan eTzMountain -07:00 Mountain Time (US & Canada) eTzCentralAmerica -06:00 Central America eTzCentral -06:00 Central Time (US & Canada) eTzMexico -06:00 Guadalajara, Mexico City, Monterrey eTzCanadaCentral -06:00 Saskatchewan eTzSAPacific -05:00 Bogota, Lima, Quito eTzEastern -05:00 Eastern Time (US & Canada) eTz USE astern -05:00 Indiana (East) eTzAtlantic -04:00 Atlantic Time (Canada) eTzSAWestern -04:00 Caracas, La Paz eTzPacificSA -04:00 Santiago eTzNewfoundland -03:30 Newfoundland eTzESouthAmerica -03:00 Brasilia eTzSAEastern -03:00 Buenos Aires, Georgetown eTzGreenland -03:00 Greenland eTzMidAtlantic -02:00 Mid-Atlantic eTzAzores -01:00 Azores eTzCapeVerde -01:00 Cape Verde Is. eTzGreenwich 00:00 Casablanca, Monrovia eTzGMT 00:00 Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London eTzWEurope +01:00 Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna eTzCentralEurope +01:00 Belgrade, Bratislava, Budapest, Ljubljana, Prague eTzRomance +01:00 Brussels, Copenhagen, Madrid, Paris eTzCentralEuropean +01:00 Sarajevo, Skopje, Warsaw, Zagreb eTzWCentralAfrica +01:00 West Central Africa eTzGTB +02:00 Athens, Beirut, Istanbul, Minsk eTzEeurope +02:00 Bucharest eTzEgypt +02:00 Cairo eTzSouthAfrica +02:00 Harare, Pretoria eTzFLE +02:00 Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius eTzJerusalem +02:00 Jerusalem eTzArabic +03:00 Baghdad eTzArab +03:00 Kuwait, Riyadh eTzRussian +03:00 Moscow, St. Petersburg, Volgograd eTzEAfrica +03:00 Nairobi eTzIran +03:30 Tehran eTzArabian +04:00 Abu Dhabi, Muscat eTzCaucasus +04:00 Baku, Tbilisi, Yerevan eTzAfghanistan +04:30 Kabul eTzEkaterinburg +05:00 Ekaterinburg eTzWestAsia +05:00 Islamabad, Karachi, Tashkent eTzIndia +05:30 Chennai, Kolkata, Mumbai, New Delhi eTzNepal +05:45 Kathmandu eTzNCentralAsia +06:00 Almaty, Novosibirsk eTzCentralAsia +06:00 Astana, Dhaka eTzSriLanka +06:00 Sri Jayawardenepura eTzMyanmar +06:30 Rangoon eTzSEAsia +07:00 Bangkok, Hanoi, Jakarta eTzNorthAsia +07:00 Krasnoyarsk eTzChina +08:00 Beijing, Chongqing, Hong Kong, Urumqi eTzNorthAsiaEast +08:00 Irkutsk, Ulaan Bataar eTzMalayPeninsula +08:00 Kuala Lumpur, Singapore eTzWAustralia +08:00 Perth eTzTaipei +08:00 Taipei eTzTokyo +09:00 Osaka, Sapporo, Tokyo eTzKorea +09:00 Seoul eTzYakutsk +09:00 Yakutsk eTzCenAustralia +09:30 Adelaide eTzAUSCentral +09:30 Darwin eTzEAustralia+10:00 Brisbane eTzAUSEastern +10:00 Canberra, Melbourne, Sydney eTzWestPacific +10:00 Guam, Port Moresby eTzTasmania +10:00 Hobart eTzVladivostok +10:00 Vladivostok eTzCentralPacific +11:00 Magadan, Solomon Is., New Caledonia eTzNewZealand +12:00 Auckland, Wellington eTzFiji +12:00 Fiji, Kamchatka, MarshallIs. eTzTonga +13:00 Nuku'alofa INTERACTION SVM_RTC_TIME_ZONE, DATE-AND-TIME (the device local time will be affected), DST start and end time. The SysVars SVM_DAYLIGHT_SAVINGS_START, SVM_DAYLIGHT_SAVINGS_END and SVM_DAYLIGHT_SAVINGS_OFFSET will be erased. PML objects DAYLIGHT-SAVINGS-START, DAYLIGHT-SAVINGS-END and DAYLIGHT-SAVINGS-OFFSET may change." ::= { status-system 99 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 time-display OBJECT-TYPE SYNTAX INTEGER { eTimeDisplayTwelveHour(1), eTimeDisplayTwentyFourHour(2) } ACCESS read-write STATUS optional DESCRIPTION "Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour for military-type display." ::= { status-system 28 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.22 date-display OBJECT-TYPE SYNTAX INTEGER { eDateDisplayMMDDYY(1), eDateDisplayDDMMYY(2), eDateDisplayYYMMDD(3), eDateDisplayMMM-DD-YYYY(4), eDateDisplayDD-MMM-YYYY(5), eDateDisplayYYYY-MMM-DD(6) } ACCESS read-write STATUS optional DESCRIPTION "Controls front-panel date display format." ::= { settings-system 22 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 localization-languages-supported OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639, each separated by a comma character." ::= { status-system 52 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 localization-countries-supported OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166, each separated by a comma character." ::= { status-system 53 } control-panel-display-contents-change-counter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "A counter which increments whenever the contents of the front panel display changes. This object is implemented as a 32-bit signed integer which rolls over to zero when it reaches a maximum value." ::= { status-system 63 } control-panel-display-contents-crc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Reading this object returns a 32-bit Cyclical Redundancy Check (CRC) which represents the current contents of the display. Additional information: This object has been implimented as an 32-bit CRC for this product." ::= { status-system 64 } control-panel-display-graphical-contents OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Reading this object returns a graphical file format image representing the current pixel content of the display. The device POS will specify the expected screen resolution, color depth of the display and graphics file format for a given product (eg. 160x64x1 GIF format OR 640x240x4 JPEG format). If the image is large enough that it needs to be returned in multiple objects then each array object will contain a portion of the image. The image will then need to be reconstructed by a host application. An application that needs to determine if their is an additional object to be retreived will need to perform a GETNEXT operation until there are no more objects in the sub-tree. Additional information: This object returns a GIF image that represents the current contents of the 640x240x2 control panel display. Most display images require more than one instance of this object in order to retreive the complete GIF image." ::= { control-panel-display 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3 mass-storage-resource-change-counter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "A counter which changes when a mass storage based resource has been added or deleted. Additional information: The value of this counter changes each time the MASS-STORAGE-RESOURCE-CHANGED object is set to eTrue. The value also changes when the mass storage device is initialized. However, the value does not change when a mass storage device is removed and a different mass storage device is installed. Initializing all volumes sets this object back to the factory default value. A reboot sets this object back to the factory devalut value. Returns status if attempting to access this object and there is no storage device is installed." ::= { mass-storage-resources 1 } mass-storage-resource-changed OBJECT-TYPE SYNTAX INTEGER { eTrue(2) } ACCESS write-only STATUS optional DESCRIPTION "Setting to eTrue causes MASS-STORAGE-RESOURCE-CHANGE-COUNTER to be incremented. Additional information: Returns status if attempting to access this object and there is no storage device is installed." ::= { mass-storage-resources 2 } ram-disk-mode OBJECT-TYPE SYNTAX INTEGER { eOff(1), eAuto(3) } ACCESS read-write STATUS optional DESCRIPTION "Returns or controls RAM disk support. eOFF turns off the RAM disk functionality. eOn turns on the RAM disk functionality and creates a RAM disk whose size is controlled by the RAM-DISK-SIZE object. eAuto turns on the RAM disk functionality and creates a RAM disk size determined by the printer based on installed options and other memory related settings. Additional information: Returns or controls RAM disk support. eOFF turns off the RAM disk functionality. eAuto turns on the RAM disk functionality and creates a RAM disk size determined by the printer based on the amount of installed memory." ::= { settings-mass-storage-bd 1 } ram-disk-size OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns or controls the size of the RAM disk. The device POS specifies the minimum memory requirements. The object MAXIMUM-RAM-DISK-MEMORY specifies the maximum memory available for the RAM disk. Additional information: Returns the size of the RAM disk." ::= { settings-mass-storage-bd 2 } maximum-ram-disk-memory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object's name is misleading. This object does not return the maximum configurable RAM disk size. Instead, it returns the maximum amount of memory, in bytes, that can used to increase the size of the RAM disk. Additional information: This object returns the maximum amount of additional memory that is available for increasing the size of the RAM disk." ::= { status-mass-storage-bd 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.23.1.1 supports-pjl-user-groups OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS read-only STATUS optional DESCRIPTION " Returns eTrue if the device is able to process PJL user group variables. See the PJL Technical Reference for the proper syntax for setting these variables. Because there may be many user groups in some environments, this object allows a client application to optimize the print job by including user groups only when the device is able to process them" ::= { settings-security 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1.3 show-address OBJECT-TYPE SYNTAX INTEGER { eAuto(3), eOff(1) } ACCESS read-write STATUS optional DESCRIPTION " If this object is set to eAuto, and the device has an IP address, the IP address of the device will be shown with the READY message. If this object is set to eOff, the IP address will not be shown" ::= { display-status 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 error-log-clear OBJECT-TYPE SYNTAX INTEGER { eClearErrorLog(1) } ACCESS write-only STATUS optional DESCRIPTION " Setting this object clears all the entries in the error log sub-tree " ::= { status-system 38 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.105 warning-log-clear OBJECT-TYPE SYNTAX INTEGER { eClearErrorLog(1) } ACCESS write-only STATUS optional DESCRIPTION " Setting this object clears all the entries in the warning log sub-tree" ::= { status-system 105 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.4.1 warning4-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 4 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning4 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.1 error14-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 14 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error14 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.1 error15-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 15 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error15 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.1 error16-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 16 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error16 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.1 error17-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 17 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error17 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.1 error18-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 18 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error18 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.1 error19-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 19 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error19 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.1 error20-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 20 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error20 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.1 error21-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 21 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error21 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.1 error22-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 22 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error22 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.1 error23-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 23 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error23 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.1 error24-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 24 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error24 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.1 error25-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 25 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error25 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.1 error26-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 26 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error26 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.1 error27-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 27 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error27 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.1 error28-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 28 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error28 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.1 error29-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 29 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error29 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.1 error30-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 30 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error30 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.1 error31-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 31 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error31 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.1 error32-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 32 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error32 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.1 error33-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 33 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error33 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.1 error34-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 34 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error34 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.1 error35-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 35 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error35 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.1 error36-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 36 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error36 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.1 error37-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 37 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error37 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.1 error38-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 38 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error38 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.1 error39-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 39 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error39 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.1 error40-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 40 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error40 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.1 error41-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 41 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error41 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.1 error42-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 42 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error42 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.1 error43-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 43 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error43 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.1 error44-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 44 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error44 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.1 error45-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 45 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error45 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.1 error46-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 46 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error46 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.1 error47-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 47 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error47 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.1 error48-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 48 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error48 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.1 error49-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 49 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error49 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.1 error50-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 50 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error50 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.1.1 warning1-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 1 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning1 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.2.1 warning2-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 2 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning2 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.3.1 warning3-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 3 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning3 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.33.1 warning33-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 33 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning33 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.5.1 warning5-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 5 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning5 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.6.1 warning6-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 6 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning6 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.7.1 warning7-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 7 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning7 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.8.1 warning8-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 8 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning8 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.9.1 warning9-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 9 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning9 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.10.1 warning10-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 10 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning10 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.11.1 warning11-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 11 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning11 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.12.1 warning12-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 12 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning12 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.13.1 warning13-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 13 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning13 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.14.1 warning14-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 14 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning14 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.15.1 warning15-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 15 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning15 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.16.1 warning16-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 16 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning16 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.17.1 warning17-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 17 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning17 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.18.1 warning18-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 18 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning18 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.19.1 warning19-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 19 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning19 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.20.1 warning20-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 20 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning20 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.21.1 warning21-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 21 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning21 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.22.1 warning22-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 22 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning22 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.23.1 warning23-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 23 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning23 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.24.1 warning24-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 24 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning24 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.25.1 warning25-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 25 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning25 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.26.1 warning26-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 26 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning26 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.27.1 warning27-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 27 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning27 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.28.1 warning28-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 28 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning28 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.29.1 warning29-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 29 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning29 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.30.1 warning30-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 30 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning30 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.31.1 warning31-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 31 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning31 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.32.1 warning32-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 32 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning32 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.48.1 warning48-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 48 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning48 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.1 error13-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 13 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error13 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.35.1 warning35-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 35 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning35 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.36.1 warning36-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 36 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning36 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.37.1 warning37-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 37 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning37 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.38.1 warning38-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 38 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning38 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.39.1 warning39-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 39 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning39 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.40.1 warning40-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 40 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning40 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.41.1 warning41-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 41 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning41 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.42.1 warning42-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 42 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning42 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.43.1 warning43-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 43 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning43 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.44.1 warning44-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 44 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning44 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.45.1 warning45-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 45 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning45 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.46.1 warning46-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 46 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning46 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.47.1 warning47-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 47 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning47 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.34.1 warning34-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 34 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning34 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.49.1 warning49-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 49 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning49 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.50.1 warning50-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when warning 50 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { warning50 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.1 error1-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error1 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.1 error2-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error2 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.1 error3-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error3 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.1 error4-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error4 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.1 error5-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error5 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.1 error6-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error6 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.1 error7-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error7 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.1 error8-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error8 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.1 error9-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error9 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.1 error10-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error10 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.1 error11-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 11 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error11 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.1 error12-time-stamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains some sort of time stamp indicating when error 12 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp" ::= { error12 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.3.2 warning3-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning3 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.2 error11-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error11 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.2 error13-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error13 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.2 error14-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error14 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.2 error15-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error15 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.2 error16-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error16 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.2 error17-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error17 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.2 error18-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error18 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.2 error19-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error19 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.2 error20-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error20 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.2 error21-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error21 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.2 error22-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error22 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.2 error23-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error23 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.2 error24-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error24 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.2 error25-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error25 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.2 error26-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error26 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.2 error27-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error27 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.2 error28-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error28 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.2 error29-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error29 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.2 error30-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error30 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.2 error31-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error31 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.2 error32-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error32 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.2 error33-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error33 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.2 error34-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error34 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.2 error35-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error35 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.2 error36-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error36 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.2 error37-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error37 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.2 error38-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error38 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.2 error39-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error39 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.2 error40-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error40 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.2 error41-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error41 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.2 error42-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error42 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.2 error43-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error43 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.2 error44-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error44 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.2 error45-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error45 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.2 error46-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error46 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.2 error47-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error47 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.2 error48-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error48 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.2 error49-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error49 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.2 error50-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error50 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.1.2 warning1-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning1 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.2.2 warning2-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning2 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.32.2 warning32-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning32 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.4.2 warning4-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning4 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.5.2 warning5-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning5 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.6.2 warning6-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning6 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.7.2 warning7-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning7 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.8.2 warning8-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning8 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.9.2 warning9-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning9 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.10.2 warning10-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning10 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.11.2 warning11-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning11 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.12.2 warning12-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning12 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.13.2 warning13-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning13 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.14.2 warning14-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning14 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.15.2 warning15-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning15 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.16.2 warning16-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning16 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.17.2 warning17-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning17 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.18.2 warning18-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning18 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.19.2 warning19-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning19 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.20.2 warning20-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning20 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.21.2 warning21-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning21 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.22.2 warning22-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning22 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.23.2 warning23-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning23 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.24.2 warning24-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning24 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.25.2 warning25-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning25 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.26.2 warning26-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning26 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.27.2 warning27-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning27 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.28.2 warning28-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning28 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.29.2 warning29-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning29 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.30.2 warning30-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning30 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.31.2 warning31-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning31 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.47.2 warning47-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning47 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.2 error10-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error10 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.34.2 warning34-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning34 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.35.2 warning35-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning35 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.36.2 warning36-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning36 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.37.2 warning37-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning37 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.38.2 warning38-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning38 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.39.2 warning39-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning39 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.40.2 warning40-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning40 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.41.2 warning41-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning41 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.42.2 warning42-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning42 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.43.2 warning43-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning43 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.44.2 warning44-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning44 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.45.2 warning45-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning45 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.46.2 warning46-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning46 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.33.2 warning33-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning33 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.48.2 warning48-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning48 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.49.2 warning49-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning49 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.50.2 warning50-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code value" ::= { warning50 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.2 error12-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error12 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.2 error1-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error1 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.2 error2-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error2 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.2 error3-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error3 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.2 error4-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error4 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.2 error5-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error5 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.2 error6-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error6 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.2 error7-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error7 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.2 error8-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error8 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.2 error9-code OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value" ::= { error9 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.3 error13-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\ " ::= { error13 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.3 error14-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error14 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.3 error15-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error15 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.3 error16-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error16 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.3 error17-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error17 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.3 error18-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error18 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.3 error19-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error19 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.3 error20-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error20 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.3 error21-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error21 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.3 error22-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error22 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.3 error23-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error23 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.3 error24-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error24 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.3 error25-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error25 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.3 error26-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error26 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.3 error27-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error27 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.3 error28-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error28 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.3 error29-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error29 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.3 error30-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error30 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.3 error31-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error31 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.3 error32-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error32 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.3 error33-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error33 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.3 error34-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error34 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.3 error35-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error35 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.3 error36-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error36 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.3 error37-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error37 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.3 error38-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error38 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.3 error39-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error39 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.3 error40-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error40 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.3 error41-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error41 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.3 error42-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error42 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.3 error43-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error43 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.3 error44-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error44 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.3 error45-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error45 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.3 error46-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error46 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.3 error47-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error47 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.3 error48-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error48 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.3 error49-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error49 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.3 error50-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error50 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.1.3 warning1-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning1 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.2.3 warning2-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning2 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.3.3 warning3-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning3 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.4.3 warning4-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning4 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.5.3 warning5-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning5 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.6.3 warning6-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning6 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.7.3 warning7-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning7 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.8.3 warning8-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning8 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.9.3 warning9-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning9 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.10.3 warning10-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning10 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.11.3 warning11-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning11 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.12.3 warning12-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning12 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.13.3 warning13-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning13 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.14.3 warning14-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning14 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.15.3 warning15-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning15 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.16.3 warning16-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning16 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.17.3 warning17-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning17 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.18.3 warning18-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning18 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.19.3 warning19-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning19 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.20.3 warning20-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning20 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.21.3 warning21-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning21 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.22.3 warning22-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning22 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.23.3 warning23-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning23 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.24.3 warning24-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning24 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.25.3 warning25-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning25 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.26.3 warning26-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning26 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.27.3 warning27-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning27 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.28.3 warning28-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning28 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.29.3 warning29-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning29 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.30.3 warning30-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning30 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.31.3 warning31-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning31 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.32.3 warning32-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning32 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.33.3 warning33-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning33 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.34.3 warning34-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning34 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.35.3 warning35-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning35 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.36.3 warning36-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning36 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.37.3 warning37-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning37 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.38.3 warning38-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning38 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.39.3 warning39-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning39 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.3 error1-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error1 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.41.3 warning41-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning41 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.42.3 warning42-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning42 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.43.3 warning43-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning43 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.44.3 warning44-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning44 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.45.3 warning45-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning45 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.46.3 warning46-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning46 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.47.3 warning47-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning47 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.48.3 warning48-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning48 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.49.3 warning49-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning49 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.50.3 warning50-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning50 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.3 error2-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error2 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.40.3 warning40-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { warning40 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.3 error3-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error3 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.3 error4-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error4 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.3 error5-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error5 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.3 error6-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error6 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.3 error7-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error7 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.3 error8-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error8 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.3 error9-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error9 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.3 error10-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error10 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.3 error11-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error11 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.3 error12-date-time OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d 03 0f where, \\ 04 (hex) - corresponds to the year 2004. \\ 07 (hex) - corresponds to month, 07 \\ 0d (hex) - corresponds to date, 13 \\ 03 (hex) - corresponds to hour, 3 a.m. \\ 0f (hex) - corresponds to min, 15. \\" ::= { error12 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.71 order-cartridge OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " Used to enable/disable the supplies status message that is shown when the supply reaches low" ::= { settings-system 71 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.1 clearable-warning OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2), eJob(3) } ACCESS read-write STATUS optional DESCRIPTION " Returns or controls how the device will track clearable warnings. A clearable warning indicates a transient event in the device. The device will continue after the transient event occurs. If CLEARABLE-WARNING is eOff, the device does not track clearable warnings. If CLEARABLE-WARNING is eOn, all clearable warnings will be tracked until cleared (acknowledged). If CLEARABLE-WARNING is eJob, a clearable warning generated due to an event that occurs because of the print job being processed will be automatically cleared when the device has finished processing the job. Example clearable warning events include the device altering resolution or page protection due to memory constraints. The POS will document what transient events are treated as clearable warnings" ::= { settings-job 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 auto-continue OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION "Indicates if the device will automatically continue after encountering a continuable error. If AUTO-CONTINUE is set to eOn, the device will automatically generate continue event to acknowledge continuable errors. If AUTO-CONTINUE is set to eOff, then some other continue event will have to acknowledge the continuable error.Interaction May not be settable if NOT-IDLE contains the cProcessingPDL item. See continue object for a description of continuable errors" ::= { status-system 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.17 protect-ews-info-tab OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " This PML object is used by the WJA tool to allow administrators to enable or disable EWS information tab protection. When this option in selected/turned on the user will not be able to access anything on the EWS without logging in with the EWS device <>(in case the EWS device <> is configured). If the option is turned off the user will be able to access the information tab on the EWS page without providing the EWS device <>(in case the EWS device <> is configured), for all other tabs on the EWS page the user will have to login with EWS device <>" ::= { settings-system2 17 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1 simm1-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in SIMM slot 1. eEmpty means the device did not detect any option installed in the interface slot. eUnknown means the device doesn't recognize the installed option. eUnSupported means the device recognizes the installed option, but does not support the option. eReadOnlyMemory means the installed option contains ROM Ics. eVolatileRandomAccessMemory means the installed option contains RAM ICs that loose data when the power is turned off. eNonVolatileRandomAccessMemory means that the installed option contains RAM ICs that do not loose data when the power is turned off. eFlashMemory means that the installed option contains a type of non-volatile RAM that needs to be erased before it can be written. eDiskDrive means the installed option contains a disk drive. eRamRom means the installed option contains both volatile random access memory and read only memory. eInputPHD means the installed option is an input paper handling device. eOutputPHD means the installed option is an output paper handling device. eIOCard means the installed option is an I/O card. Additional information: This object is used for describing DIMMs instead of SIMMs on $product_str. eRamRom is used to denote $product_str's combo simm." ::= { simm1 4 } simm1-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of the SIMM installed in SIMM slot 1. The capacity is dependent on the type of option, as indicated by the SIMM1-TYPE object. This object has no meaning if the installed option type is eUnknown or eReadOnlyMemory. This object contains the size, in bytes, if the installed option type is eVolatileRandomAccessMemory, eNonVolatileRandomAccessMemory, eFlashMemory, or eDiskDrive. If the type of the installed option is eRamRom, this object contains the size, in bytes, of the random access memory. If the type of the installed option is eInputPHD, the capacity indicates the number of input trays supported by the installed option. If the type of the installed option is eOutputPHD, the capacity indicates the number of output bins supported by the installed option. If the type of the installed option is eIOCard, the capacity indicates the number of logical I/O ports supported by the I/O card. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIMM1-TYPE type is eVolatileRandomAccessMemory, eRamRom, or eFlashMemory. For eRamRom only the size of the Ram portion of the SIMM is returned." ::= { simm1 5 } simm1-bank1-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in Bank 1 of SIMM slot 1. See SIMM1-TYPE for a description. Additional information: This object is used for describing the type of DIMM banks. Each physical DIMM slot has up to 2 banks." ::= { simm1-bank1 1 } simm1-bank1-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of Bank 1 of the SIMM installed in SIMM slot 1. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed bank option in bytes. This object is not supported unless the SIMM1-BANK1-TYPE type is eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory, eSDRandomAccessMemory, eSRandomAccessMemory, or eFPMRandomAccessMemory." ::= { simm1-bank1 2 } simm1-bank2-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in Bank 2 of SIMM slot 1. See SIMM1-TYPE for a description. Additional information: This object is used for describing the type of DIMM banks. Each physical DIMM slot has up to 2 banks." ::= { simm1-bank2 1 } simm1-bank2-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of Bank 2 of the SIMM installed in SIMM slot 1. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed bank option in bytes. This object is not supported unless the SIMM1-BANK2-TYPE type is eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory, eSDRandomAccessMemory, eSRandomAccessMemory, or eFPMRandomAccessMemory." ::= { simm1-bank2 2 } simm2-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used for describing DIMMs instead of SIMMs on $product_str. eRamRom is used to denote $product_str's combo simm." ::= { simm2 4 } simm2-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: This object is used for describing DIMMs instead of SIMMs on $product_str. Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIMM2-TYPE type is eVolatileRandomAccessMemory, eRamRom, or eFlashMemory. For eRamRom only the size of the Ram portion of the SIMM is returned." ::= { simm2 5 } simm2-bank1-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in Bank 1 of SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used for describing the type of DIMM banks. Each physical DIMM slot has up to 2 banks." ::= { simm2-bank1 1 } simm2-bank1-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of Bank 1 of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed bank option in bytes. This object is not supported unless the SIMM2-BANK1-TYPE type is eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory, eSDRandomAccessMemory, eSRandomAccessMemory, or eFPMRandomAccessMemory." ::= { simm2-bank1 2 } simm2-bank2-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in Bank 2 of SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used for describing the type of DIMM banks. Each physical DIMM slot has up to 2 banks." ::= { simm2-bank2 1 } simm2-bank2-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of Bank 2 of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed bank option in bytes. This object is not supported unless the SIMM2-BANK2-TYPE type is eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory, eSDRandomAccessMemory, eSRandomAccessMemory, or eFPMRandomAccessMemory." ::= { simm2-bank2 2 } simm3-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in SIMM slot 3. See SIMM1-TYPE for a description." ::= { simm3 4 } simm3-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: This object is used for describing DIMMs instead of SIMMs on LaserJet 8150. Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIMM3-TYPE type is eVolatileRandomAccessMemory, eRamRom, or eFlashMemory. For eRamRom only the size of the Ram portion of the simm is returned." ::= { simm3 5 } simm3-bank1-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in Bank 1 of SIMM slot 3. See SIMM1-TYPE for a description. Additional information: This object is used for describing the type of DIMM banks. Each physical DIMM slot has up to 2 banks." ::= { simm3-bank1 1 } simm3-bank1-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of Bank 1 of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed bank option in bytes. This object is not supported unless the SIMM3-BANK1-TYPE type is eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory, eSDRandomAccessMemory, eSRandomAccessMemory, or eFPMRandomAccessMemory." ::= { simm3-bank1 2 } simm3-bank2-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in Bank 2 of SIMM slot 3. See SIMM1-TYPE for a description. Additional information: This object is used for describing the type of DIMM banks. Each physical DIMM slot has up to 2 banks." ::= { simm3-bank2 1 } simm3-bank2-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of Bank 2 of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed bank option in bytes. This object is not supported unless the SIMM3-BANK2-TYPE type is eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory, eSDRandomAccessMemory, eSRandomAccessMemory, or eFPMRandomAccessMemory." ::= { simm3-bank2 2 } simm4-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in SIMM slot 4. See SIMM1-TYPE for a description." ::= { simm4 4 } simm4-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of the SIMM installed in SIMM slot 4. See SIMM1-CAPACITY for a description. Additional information: This object is used for describing DIMMs instead of SIMMs on LaserJet 8150. Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIMM4-TYPE type is eVolatileRandomAccessMemory, eRamRom, or eFlashMemory. For eRamRom only the size of the Ram portion of the simm is returned." ::= { simm4 5 } simm4-bank1-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in Bank 1 of SIMM slot 4. See SIMM1-TYPE for a description. Additional information: This object is used for describing the type of DIMM banks. Each physical DIMM slot has up to 2 banks." ::= { simm4-bank1 1 } simm4-bank1-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of Bank 1 of the SIMM installed in SIMM slot 4. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed bank option in bytes. This object is not supported unless the SIMM4-BANK1-TYPE type is eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory, eSDRandomAccessMemory, eSRandomAccessMemory, or eFPMRandomAccessMemory." ::= { simm4-bank1 2 } simm4-bank2-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eFlashMemory(7), eRamRom(9) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in Bank 2 of SIMM slot 4. See SIMM1-TYPE for a description. Additional information: This object is used for describing the type of DIMM banks. Each physical DIMM slot has up to 2 banks." ::= { simm4-bank2 1 } simm4-bank2-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the capacity of Bank 2 of the SIMM installed in SIMM slot 4. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed bank option in bytes. This object is not supported unless the SIMM4-BANK2-TYPE type is eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory, eSDRandomAccessMemory, eSRandomAccessMemory, or eFPMRandomAccessMemory." ::= { simm4-bank2 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1.5 ews-request-control-panel-supplies-status OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS read-write STATUS optional DESCRIPTION " System variable EWS_REQUEST_CONTROL_PANEL_SUPPPLIES_STATUS requires a PML interface so that WJA can directly access it without needing EWS support for that" ::= { settings-web-server 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.7.1 socket-ping-job-events-version OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS optional DESCRIPTION "This object reports the current version of the Socket Ping Job Events capability. The version number is returned as a string in the format MAJOR.MINOR.SUB version. (eg. 1.0.1) If socket ping is not supported by this printer then the object is either not implemented or it returns a '0'." ::= { socket-ping 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.6.2 channelprinteralert OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Identifies the values of prtAlertIndex, prtAlertSeverityLevel, prtAlertGroup, prtAlertGroupIndex, prtAlertLocation, and prtAlertCode for the latest critical evnet in the prtAlertTable. The OCTET STRING string is defined as following: \\ ----------------------------------------------------- Field | Filed | DESCRIPTION Offset | Length | ----------------------------------------------------- 0 | 4 | the value of prtAlertIndex 4 | 4 | the value of prtAlertSeverityLevel 8 | 4 | the value of prtAlertGroup 12 | 4 | the value of prtAlertGroupIndex 16 | 4 | the value of prtAlertLocation 20 | 4 | the value of prtAlertCode ------------------------------------------------------
\\ Each field is in Big Endian style" ::= { channel 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.1 model-number OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products should note in POS if the model number on the CPL changes but the device reports the previous model number. If the model number changes based on the installed options, the POS should indicate if only the base model number is returned, or if the device senses the installed options and returns the correct model number. If possible, encode the model number in a symbol set (like Roman-8) that matches the ASCII character set and limit the characters used to ASCII characters" ::= { id 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.9 phd1-diagnostics-nvram-data OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "The NVRAM Diagnostics information consist of e-serial number, born-on date, manufacturing date, page counter, finisher counter, jam rate history, event log, and any other device-specific information that the PHD1 stores in NVRAM. This information will be returned as a string with XML format within XML tags. Additional information: The NVRAM Diagnostics information consist of e-serial number, born-on date, manufacturing date, page counter, finisher counter, jam rate history, event log, and any other device-specific information that the PHD2 stores in NVRAM. This information will be returned as a string with XML format within XML tags. IDs from {3..9} will fail if the output device is other than MBM" ::= { phd1 9 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 service-id OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " A read of this object will return the current SERVICE ID value in the printer. The format is 'YYDDD' where: \\ YY = calendar year - 1990 \\ DDD = (calendar month - 1) * 30 + (calendar day of the month or 30, if > 30) \\ A write of this object will only succeed if the MANUFACTURING-CONTROL PML object has been set with the correct <>. If the write operation is not allowed, this object will return an status" ::= { status-system 19 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 install-date OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: \\ YYYY is the year. \\ MM is the month (1-12). \\ DD is the day (1-31). \\ HH is the hour of the day (0-23). \\ mm are the minutes (0-59). \\ 'Z' designates Greenwich Mean Time; if 'Z' not specified, value is local time. \\ Device POS must specify the conditions for setting this object" ::= { status-system 8 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3 serial-number OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERIAL-NUMBER object is set at the factory, then the <> object must be set correctly before the SERIAL-NUMBER object is writable. If this is a writable object, the POS should indicate the maximum supported string length. If possible, encode the serial number in a symbol set (like Roman-8) that matches the ASCII character set and limit the characters used to ASCII characters" ::= { id 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2 model-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming conventions. Products should note in POS if the model name on the HP corporate price list changes but the device reports the previous device name. If the model name changes based on the installed options, the POS should indicate if only the base model name is returned, or if the device senses the installed options and returns the correct model name. If possible, encode the model name in a symbol set (like Roman-8) that matches the ASCII character set and limit the characters used to ASCII characters" ::= { id 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.16.0 model-derivative OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Identifies the device model derivative to distinguish among devices with identical MODEL-NAME and identical or unknown MODEL-NUMBER values. The device POS must specify the values returned by this object and their meanings." ::= { id 16 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10 device-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the " ::= { id 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.11 device-location OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the " ::= { id 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12 asset-number OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the " ::= { id 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.14. job-info-accounting-job-type OBJECT-TYPE SYNTAX INTEGER { ePrintJob(1), eIPPJob(2), eCopyJob(3), eCopyInterruptJob(4), eJetSendJob(5), eInternalPage(6), eCleaningPage(7), eAutoCleaningPage(8), eDigitalSendJob(9), eWebPrintJob(10), eFaxPrintJob(11), eRetrievedJob(12), ePhotoCardPrintJob(13), eUnknownJob(1000) } ACCESS read-only STATUS optional DESCRIPTION " Keeps track of what type of job is processed." ::= { job-info-accounting 14 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.13. job-info-pages-printed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Indicates the number of pages printed by the destination subsystem. If none of the cSourceSubsystem, cProcessingSubsystem or cDestinationSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the total number of pages printed for this job. This value may increase by two each time for duplex jobs. The last OID field for this dynamic object contains the job ID" ::= { job-info 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.14. job-info-size OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Indicates the number of bytes of data processed by the processing subsystem. If neither of the cSourceSubsystem or cProcessingSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the size of this job, in bytes. The last OID field for this dynamic object contains the job ID" ::= { job-info 14 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.22. job-info-physical-outbins-used OBJECT-TYPE SYNTAX INTEGER { cOutbin1(0), cOutbin2(1), cOutbin3(2), cOutbin4(3), cOutbin5(4), cOutbin6(5), cOutbin7(6), cOutbin8(7), cOutbin9(8), cOutbin10(9), cOutbin11(10), cOutbin12(11), cOutbin13(12), cOutbin14(13), cOutbin15(14), cOutbin16(15), cOutbin17(16) } ACCESS read-only STATUS optional DESCRIPTION " Indicates which physical output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID" ::= { job-info 22 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.20. job-info-outbins-used OBJECT-TYPE SYNTAX INTEGER { cOutbin1(0), cOutbin2(1), cOutbin3(2), cOutbin4(3), cOutbin5(4), cOutbin6(5), cOutbin7(6), cOutbin8(7), cOutbin9(8), cOutbin10(9), cOutbin11(10), cOutbin12(11), cOutbin13(12), cOutbin14(13), cOutbin15(14), cOutbin16(15), cOutbin17(16) } ACCESS read-only STATUS optional DESCRIPTION " Indicates which output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID" ::= { job-info 20 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.1. job-info-accounting-media-size OBJECT-TYPE SYNTAX INTEGER { eUSExecutive(1), eUSLetter(2), eUSLegal(3), eFoolscap(10), eLedger(11), eROC16K(17), eJISExecutive(18), eROC8K(19), eISOandJISA6(24), eISOandJISA5(25), eISOandJISA4(26), eISOandJISA3(27), ePRC8K270X390(33), ePRC16K195X270(34), ePRC8K260X368(35), eJISB6(44), eJISB5(45), eJISB4(46), eISOB5(65), eJapansePostcardSingle(71), eJapansePostcardDouble(72), eISOA6Postcard(73), eIndexCard4x6(74), eIndexCard5x8(75), ePhoto4x6(76), eJapanesePostcardWithTab(77), eMonarch(80), eCommercial10(81), ePRC16K184X260(89), eInternationalDL(90), eInternationalC5(91), eInternationalC6(92), eInternationalB5(100), eCustom(101), eUSEnvelopeA2(109), eJapanseEnvLong3(110), eJapanseEnvLong4(111), eUSExecutiveR(257), eUSLetterR(258), eROC16KR(273), eISOandJISA6R(280), eISOandJISA5R(281), eISOandJISA4R(282), eJISBR6R(300), eJISB5R(301), eAnyCustomSize(32764), eAnySize(32765), eCustomRoll(32766), eUnknownMediaSize(32767) } ACCESS read-only STATUS optional DESCRIPTION " Contains the media size of the printed job. The media size of the first page will decide the media size of the entire job. The return value of this object will only be valid when the printer finishes printing the entire job" ::= { job-info-accounting 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.2. job-info-accounting-media-type OBJECT-TYPE SYNTAX INTEGER { eUnknownMedia(1), eStandardType(2), ePreprinted(3), eLetterhead(4), eTransparency(5), ePrepunched(6), eLabels(7), eBond(8), eRecycled(9), eColored(10), eCardStock(11), eRough(12), eVellum(13), eHeavy(14), eGloss(15), eUserType1(16), eUserType2(17), eUserType3(18), eUserType4(19), eUserType5(20), ePhotoGlossy(24), ePhotoQualityGlossy(25), ePhotoQualityMatte(26), eEverydayPhotoGlossy(27), eEverydayPhotoMatte(28), ePremiumInkjet(29), ePremiumInkjetHeavy(30), eBrochureGlossy(31), eBrochureMatte(32), ePremiumPhotoGlossy(33), ePremiumPlussPhotoGlossy(34), ePremiumPlusPhotoMatte(35), eColorfastPhotoGlossy(36), ePremiumTransparency(37), ePremiumPlusTranparency(38), eNHPHeavyGloss(39), eExtraHeavy(40), eHighGlossImages(41), eIntermediate(42), eTab(43), eExtraHeavyGloss(44), eHPIJTrans(45), eHPSnowman160(46), eHPSnowman220(47), eHPPremMatte(48), eHPBrochMatte(49), eHPCoverMatte(50), eHPMatte(51), eCoverMatte(52), eHPOfficePaper(53), eHPOfficePaperEU(54), eLastMedia(55) } ACCESS read-only STATUS optional DESCRIPTION " Contains the media type of the printed job. The media type of the first page will decide the media type of the entire job. The return value of this object will only be valid when the printer finishes printing the entire job" ::= { job-info-accounting 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.4. job-info-accounting-media-simplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the total number of simplex pages printed in a particular job" ::= { job-info-accounting 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.5. job-info-accounting-media-duplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the total number of duplex pages printed in a particular job" ::= { job-info-accounting 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.6. job-info-accounting-grayscale-impression-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the total number of monochrome pages printed in a particular job" ::= { job-info-accounting 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.7. job-info-accounting-color-impression-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the total number of color pages printed in a particular job" ::= { job-info-accounting 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.8. job-info-accounting-black-dots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the total number of black pixels used in a particular job" ::= { job-info-accounting 8 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.9. job-info-accounting-yellow-dots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the total number of yellow pixels used in a particular job" ::= { job-info-accounting 9 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.10. job-info-accounting-cyan-dots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the total number of cyan pixels used in a particular job" ::= { job-info-accounting 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.11. job-info-accounting-magenta-dots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the total number of magenta pixels used in a particular job" ::= { job-info-accounting 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.33. job-info-accounting-fixer-dots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the total number of fixer pixels used in a particular job" ::= { job-info-accounting 33 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.3. job-info-accounting-finishing-options OBJECT-TYPE SYNTAX INTEGER { eNoFinish(1), eOffset(2), ePunch(3), eStapler(4), eFinisher(5), eBinding(6), eCustom1(11), eCustom2(12), eCustom3(13), eCustom4(14), eCustom5(15), eOther(20) } ACCESS read-only STATUS optional DESCRIPTION " Contains the finishing option used on the printed job. The finishing option specified for the first page will decide the finishing option of the entire job. The return value of this object will only be valid when the printer finishes printing the entire job" ::= { job-info-accounting 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.11. job-info-io-source OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Indicates which I/O source, the print job was received over. The value maps to port numbering scheme supported in the DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree" ::= { job-info 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.1. job-info-name1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Contains the first part of this print job's name. The last OID field for this dynamic object contains the job ID" ::= { job-info 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.2. job-info-name2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Contains the second part of this print job's name. The last OID field for this dynamic object contains the job ID" ::= { job-info 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.1. job-info-attr-1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. Attribute objects are saved sequentially, starting with 1, after the start of a job. If more attributes are set than there are objects to store them, the excess JOBATTR values are ignored. If the corresponding SET JOBATTR= command has not been received when a get is done for this object, a status of will be returned" ::= { job-info-attribute 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.2. job-info-attr-2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.3. job-info-attr-3 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.4. job-info-attr-4 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.5. job-info-attr-5 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.6. job-info-attr-6 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.7. job-info-attr-7 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.8. job-info-attr-8 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 8 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.9. job-info-attr-9 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 9 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.10. job-info-attr-10 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.11. job-info-attr-11 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.12. job-info-attr-12 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.13. job-info-attr-13 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.14. job-info-attr-14 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 14 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.15. job-info-attr-15 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.16. job-info-attr-16 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details" ::= { job-info-attribute 16 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.15. job-info-state OBJECT-TYPE SYNTAX INTEGER { eAborted(3), eWaitingForResources(4), ePrinted(5), eRetained(6), eTerminating(7), eInterrupted(8), ePaused(9), eCancelled(10), eProcessing(11), eScanning(12), eSending(13), eStored(14) } ACCESS read-only STATUS optional DESCRIPTION " Indicates the state of the job. The last OID field for this dynamic object contains the job ID. \\ eAborted - the print job was aborted. \\ eWaitingForResources - the print job requires resources that are not currently available. Example resources that can cause the job to wait include the print engine or PDL processor being unavailable. The print engine could be unavailable due to paper out, paper jam, staple out, stapler jam, marking agent low, output bin full, etc. The PDL processor could be unavailable due to an off-line condition. Each printer specific object specification should state which conditions cause a job to be waiting for resources and also state which objects can be retrieved by an application to determine the exact cause of a resource being unavailable. \\ ePrinted - the job has printed. The related JOB-INFO- OUTCOME object indicates if any problems were encountered while the job was processed. \\ eRetained - the job can be reprinted. \\ eTerminating - the job was aborted or cancelled and is currently is terminating. \\ eInterrupted - the job has been interrupted. The job can be continued. \\ ePaused - the job has been paused. The job can be continuted. \\ eCancelled - the job has been cancelled. \\ eProcessing - the job is currently being printed normally. eStored - The job is stored on the device and can be retrieved and printed at a later point in time" ::= { job-info 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.19. job-info-outcome OBJECT-TYPE SYNTAX INTEGER { eOk(3), eWarningsEncountered(4), eErrorsEncountered(5) } ACCESS read-only STATUS optional DESCRIPTION " Indicates if any warning or error conditions were encountered while processing the assoicated job. The last OID field for this dynamic object contains the job ID" ::= { job-info 19 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.12. job-info-pages-processed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Indicates the number of pages processed by the processing subsystem. If neither the cSourceSubsystem or the cProcessingSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the total number of pages processed for this job. The last OID field for this dynamic object contains the job ID" ::= { job-info 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 default-media-size OBJECT-TYPE SYNTAX INTEGER { eUSExecutive(1), eUSLetter(2), eUSLegal(3), eUSEDP(4), eEuropeanEDP(5), eReservedDoNotUse(6), eUSGovernmentLetter(7), eUSGovernmentLegal(8), eFolio(9), eFoolscap(10), eLedger(11), eCSize(12), eDSize(13), eESize(14), eStatement(15), eSuperB(16), eROC16K(17), eJISExecutive(18), eROC8K(19), eISOandJISA10(20), eISOandJISA9(21), eISOandJISA8(22), eISOandJISA7(23), eISOandJISA6(24), eISOandJISA5(25), eISOandJISA4(26), eISOandJISA3(27), eISOandJISA2(28), eISOandJISA1(29), eISOandJISA0(30), eISOandJIS2A0(31), eISOandJIS4A0(32), ePRC8K270X390(33), ePRC16K195X270(34), ePRC8K260X368(35), eISORA4(36), eISOSRA4(37), eISORA3(39), eJISB10(40), eJISB9(41), eJISB8(42), eJISB7(43), eJISB6(44), eJISB5(45), eJISB4(46), eJISB3(47), eJISB2(48), eJISB1(49), eJISB0(50), eISOB10(60), eISOB9(61), eISOB8(62), eISOB7(63), eISOB6(64), eISOB5(65), eISOB4(66), eISOB3(67), eISOB2(68), eISOB1(69), eISOB0(70), eJapansePostcardSingle(71), eJapansePostcardDouble(72), eISOA6Postcard(73), eIndexCard4x6(74), eIndexCard5x8(75), ePhoto4x6(76), eJapanesePostcardWithTab(77), eIndexCard3x5(78), eCommercial9(79), eMonarch(80), eCommercial10(81), eCatalog(82), eNo10Envelope(83), ePRC16K184X260(89), eInternationalDL(90), eInternationalC5(91), eInternationalC6(92), eInternationalC4(93), eInternationalB5(100), eCustom(101), eCustomCard(108), eUSEnvelopeA2(109), eJapanseEnvLong3(110), eJapanseEnvLong4(111), eJapaneseEnv2(112), ePhoto10x15(118), ePhotoCabinet(119), eTabloidExtra(120), ePhotoLSizeCard(121), eIndexCard5x7(122), ePhotoESizeCard(123), ePhotoKGSizeCard(124), ePhoto2ESizeCard(125), ePhoto2LSizeCard(126), eUSExecutiveR(257), eUSLetterR(258), eROC16KR(273), eISOandJISA6R(280), eISOandJISA5R(281), eISOandJISA4R(282), eJISBR6R(300), eJISB5R(301), eStatementR(302), eAnyCustomSize(32764), eAnySize(32765), eCustomRoll(32766), eUnknownMediaSize(32767), eStatementWR(65234), eJISB5WR(65235), eISOandJISA4WR(65254), eISOandJISA5WR(65255), eUSLetterWR(65278), eJISB4W(65490), eJISB5W(65491), eISOandJISA3W(65509), eISOandJISA4W(65510), eISOandJISA5W(65511), eStatementW(65521), eLedgerW(65530), eUSLetterW(65534) } ACCESS read-write STATUS optional DESCRIPTION " This indicates the default media size. A write of an unsupported value causes an . Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. (for a full list of media size enums see the end of this file)" ::= { settings-pdl 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 default-media-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " Returns or sets the media name that is used until the media name is changed by a print job command" ::= { settings-pdl 22 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.15.1. media-size-supported-driver-n-string OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION " Returns the Driver (PJL) string used to specigy a media size, for each media size that is supported by a product. PML walk of 1.4.1.15.1 will return the driver (PJL) name string for each media size supported by a product. PML Get of 1.4.1.15.1.X will return the driver (PJL) name string of the media size whose PML ID maps to X (if it is supported)" ::= { media-sizes 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 cold-reset-media-size OBJECT-TYPE SYNTAX INTEGER { eUSExecutive(1), eUSLetter(2), eUSLegal(3), eUSEDP(4), eEuropeanEDP(5), eReservedDoNotUse(6), eUSGovernmentLetter(7), eUSGovernmentLegal(8), eFolio(9), eFoolscap(10), eLedger(11), eCSize(12), eDSize(13), eESize(14), eStatement(15), eSuperB(16), eROC16K(17), eJISExecutive(18), eROC8K(19), eISOandJISA10(20), eISOandJISA9(21), eISOandJISA8(22), eISOandJISA7(23), eISOandJISA6(24), eISOandJISA5(25), eISOandJISA4(26), eISOandJISA3(27), eISOandJISA2(28), eISOandJISA1(29), eISOandJISA0(30), eISOandJIS2A0(31), eISOandJIS4A0(32), ePRC8K270X390(33), ePRC16K195X270(34), ePRC8K260X368(35), eJISB10(40), eJISB9(41), eJISB8(42), eJISB7(43), eJISB6(44), eJISB5(45), eJISB4(46), eJISB3(47), eJISB2(48), eJISB1(49), eJISB0(50), eISOB10(60), eISOB9(61), eISOB8(62), eISOB7(63), eISOB6(64), eISOB5(65), eISOB4(66), eISOB3(67), eISOB2(68), eISOB1(69), eISOB0(70), eJapansePostcardSingle(71), eJapansePostcardDouble(72), eISOA6Postcard(73), eIndexCard4x6(74), eIndexCard5x8(75), ePhoto4x6(76), eJapanesePostcardWithTab(77), eIndexCard3x5(78), eMonarch(80), eCommercial10(81), eCatalog(82), eNo10Envelope(83), ePRC16K184X260(89), eInternationalDL(90), eInternationalC5(91), eInternationalC6(92), eInternationalC4(93), eInternationalB5(100), eCustom(101), eCustomCard(108), eUSEnvelopeA2(109), eJapanseEnvLong3(110), eJapanseEnvLong4(111), eJapaneseEnv2(112), ePhoto10x15(118), ePhotoCabinet(119), ePhotoLSizeCard(121), eIndexCard5x7(122), ePhotoESizeCard(123), ePhotoKGSizeCard(124), ePhoto2ESizeCard(125), ePhoto2LSizeCard(126), eUSExecutiveR(257), eUSLetterR(258), eROC16KR(273), eISOandJISA6R(280), eISOandJISA5R(281), eISOandJISA4R(282), eJISBR6R(300), eJISB5R(301), eStatementR(302), eAnyCustomSize(32764), eAnySize(32765), eCustomRoll(32766), eUnknownMediaSize(32767), eStatementWR(65234), eJISB5WR(65235), eISOandJISA4WR(65254), eISOandJISA5WR(65255), eUSLetterWR(65278), eJISB4W(65490), eJISB5W(65491), eISOandJISA3W(65509), eISOandJISA4W(65510), eISOandJISA5W(65511), eStatementW(65521), eLedgerW(65530), eUSLetterW(65534) } ACCESS read-write STATUS optional DESCRIPTION " Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs" ::= { settings-pdl 19 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.1 media-size-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The number of impressions printed on sheets of this media size. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage. Additional information: The value of this object is persistent across a power cycle. The index for these objects, the last number of the OID, uniquely identifies the paper size. This value corresponds to the page sizes listed below. These values are also documented in the PCL Implementor's Guide and the PML Master MIB. 1 US-Executive 2 US-Letter 3 US-Legal 25 ISO and JIS A5 26 ISO and JIS A4 45 JIS B5 80 LaserJet 4500 81 Commercal-10 90 International DL 91 International C5 100 International B5 101 Custom" ::= { media-size 1 } media-size-west-edge-first-side-offset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for the first printed side of the medium only. A positive value moves the image away from the west edge of the medium. A negative value moves the image closer to the west edge of the medium. The value 0 will return the image to its factory default position. Additional information: Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for the first printed side of the medium only. A positive value moves the image away from the west edge of the medium. A negative value moves the image closer to the west edge of the medium. The value 0 will return the image to its factory default position. The values in the sub array index are from the media size table in the hpmib. This adjustment is done on a paper size by paper size basis. The standard PCL5 codes for paper size are used for the value used in the OID. Please see S_ARRAY_SUB1 for legal values. The data for this object is stored in NVRAM." ::= { media-size 2 } media-size-west-edge-second-side-offset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for the second printed side of the medium only. A positive value moves the image away from the west edge of the medium. A negative value moves the image closer to the west edge of the medium. The value 0 will return the image to its factory default position. Additional information: Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for the second printed side of the medium only. A positive value moves the image away from the west edge of the medium. A negative value moves the image closer to the west edge of the medium. The value 0 will return the image to its factory default position. The values in the sub array index are from the media size table in the hpmib. This adjustment is done on a paper size by paper size basis. The standard PCL5 codes for paper size are used for the value used in the OID. Please see S_ARRAY_SUB1 for legal values. The data for this object is stored in NVRAM." ::= { media-size 3 } media-size-west-edge-side-offset-by-tray OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). A positive value moves the image away from the west edge of the medium. A negative value moves the image closer to the west edge of the medium. The value 0 will return the image to its factory default position. Each OID binding corresponds to a valid tray number for this product. There can be a maximum of 15 trays, a combination of internal and external trays. Products that support other combinations of trays will specify this information in the device pos. The data for this object is stored in NVRAM. Additional information: Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). A positive value moves the image away from the west edge of the medium. A negative value moves the image closer to the west edge of the medium. The value 0 will return the image to its factory default position. Each OID binding corresponds to a valid tray number for this product. There can be a maximum of 15 trays, a combination of internal and external trays. Products that support other combinations of trays will specify this information in the device pos. The data for this object is stored in NVRAM." ::= { media-size 4 } printer-average-marking-agent-coverage OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object is used to read the average marking agent coverage for a given color plane. It is a real number that represents percentage full and will read from 0 to 100%. This object obsoletes or replaces USAGE-AVERAGE-TONER-COVERAGE which could only be used for black toner coverage information. Additional information: The average percent of toner coverage for a specific color plane. The OID binding is the color plane. Only color planes which the printer supports will be available. This is only available if a hard disk is installed." ::= { printer-average 1 } printer-average-marking-agent-coverage-sum OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object is used to read the accumulated sum of the percent coverage numbers calculated on a per page basis over the life of the printer. Additional information: The sum of the percent toner coverages for all impressions printed. The OID binding is the color plane. Only color planes which the printer supports will be available." ::= { printer-average 2 } printer-average-marking-agent-coverage-sum-squared OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object is used to read the accumulated sum of the squares of the percent coverage numbers calculated on a per page basis over the life of the printer. Additional information: The sum of the percent toner coverages squared for all impressions printed. The OID binding is the color plane. Only color planes which the printer supports will be available." ::= { printer-average 3 } printer-average-marking-agent-units-per-gram OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object is used to read the marking agent units of measure per gram. This is typically a conversion factor for converting pixels of toner to grams. This pixels-per-gram value is used to calculate the estimated number of pages remaining for a given marking agent." ::= { printer-average 4 } printer-average-marking-agent-coverage-actual OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object is used to read the actual average marking agent coverage for a given color plane. It is a real number that represents percent coverage and will read from 0 to 100%. This object will return the same value as PRINTER-AVERAGE-MARKING-AGENT-COVERAGE except under certain conditions which will be specified in the device POS." ::= { printer-average 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.8.1 media-number-of-type-supported OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Indicates the maximum number of supported media types" ::= { media-types 1 } low-marking-agent-processing OBJECT-TYPE SYNTAX INTEGER { eStop(1), eCont(2) } ACCESS read-write STATUS optional DESCRIPTION "Returns or changes how the device processes a low marking agent event. If eCont, then the device continues to print. If eStop, then the device stops until a continue event occurs." ::= { settings-marking-agent 3 } out-marking-agent-processing OBJECT-TYPE SYNTAX INTEGER { eStop(1) } ACCESS read-only STATUS optional DESCRIPTION "Returns or changes how the device processes an out marking agent event. If eCont, then the device continues to print. If eStop, then the device stops until a continue event occurs. Additional information: Returns a value that indicates how the device processes an out marking agent event. This device will always stop when a supply reaches an out condition and will not continue until a non-out supply is installed." ::= { settings-marking-agent 10 } marker-density-calibration OBJECT-TYPE SYNTAX INTEGER { eNotCalibrating(1), eCalibrateALL(2), eCalibrateColor(3), eCalibrateColorPlaneRegistration(5), eCalibrateDrumPhaseAdjustment(6), eCalibrateBlackOnly(7) } ACCESS read-write STATUS optional DESCRIPTION "Returns the calibration status or triggers a calibration cycle. All calibration procedures are used if set to eCalibrateALL. If set to eCalibrateColor then a full density engine calibration is triggered. If set to eCalibrateColorPlaneRegistration, then a Color Plane Registration calibration is triggered. If set to eCalibrateDrumPhaseAdjustment, then a Drum Phase Adjustment calibration is triggered. Note that eNotCalibrating and eCalibrateBlackOnly are read-only values. eNotCalibrating is returned when no calibrations are executing. eCalibrateBlackOnly is returned when a density engine calibration is executing while in MPACCO mode." ::= { settings-marking-agent 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.1 media-names-available OBJECT-TYPE SYNTAX INTEGER { cMediaName1Available(0), cMediaName2Available(1), cMediaName3Available(2), cMediaName4Available(3), cMediaName5Available(4), cMediaName6Available(5), cMediaName7Available(6), cMediaName8Available(7), cMediaName9Available(8), cMediaName10Available(9), cMediaName11Available(10), cMediaName12Available(11), cMediaName13Available(12), cMediaName14Available(13), cMediaName15Available(14), cMediaName16Available(15), cMediaName17Available(16), cMediaName18Available(17), cMediaName19Available(18), cMediaName20Available(19), cMediaName21Available(20), cMediaName22Available(21), cMediaName23Available(22), cMediaName24Available(23), cMediaName25Available(24), cMediaName26Available(25), cMediaName27Available(26), cMediaName28Available(27), cMediaName29Available(28), cMediaName30Available(29), cMediaName31Available(30), cMediaName32Available(31) } ACCESS read-write STATUS optional DESCRIPTION " The value of this object controls which of the MEDIAx-NAME objects are supported. If a bit is set to zero, then attempting to get or set the corresponding MEDIAx-NAME objects will return " ::= { settings-print-media 1 } north-edge-offset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or sets the number of 300 dpi dots by which the image is shifted. Shift is relative to the leading edge of the medium as the medium flows through the marking engine with the side to be imaged facing the observer. The leading edge is the North edge and the other edges are defined by the normal compass layout of directions with the compass facing the observer. The adjustment is for all pages printed. A positive value moves the image away from the leading edge of the medium. A negative value moves the image closer to the leading edge of the medium. The value 0 will return the image to its factory default position. Additional information: Returns or sets the number of 300 dpi dots by which the image is shifted. Shift is relative to the leading edge of the medium as the medium flows through the marking engine with the side to be imaged facing the observer. The leading edge is the North edge and the other edges are defined by the normal compass layout of directions with the compass facing the ob server. The adjustment is for all pages printed. A positive value moves the image away from the leading edge of the medium. A negative value moves the image closer to the leading edge of the medium. The value 0 will return the image to its factory default position. The value of this object is stored in NVRAM." ::= { settings-print-media 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.3 media-names-enabled OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " The value of this object controls whish of the MEDIAx-NAME objects are supported. Of a bit is set to zero then the attempt to get or set the corresponding MEDIAx-NAME objects will return " ::= { settings-print-media 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.1 media1-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 1 name. Additional information: The symbol set for this string is Roman-8." ::= { media1 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.2 media1-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 1. The length restriction is required to allow the media name to be displayed on the device's control panel. The device POS must state the maximum number of characters allowed. If the device also has a limitation on what characters in a character set can be used (e.g. only uppercase characters allowed), the POS should also state character restrictions. Additional information: The maximum supported string length is 9 characters. If the user entered string is too long, the device will store the first 9 characters and will return the status. The characters must be in the range 20H to 7FH except 5C cannot be used. The default symbol set is Roman-8 for English; additional legal symbol sets are ISOLatin5, ISOLatin2 and Windows31J. Setting this object with characters outside of the range or of an illegal symbol set will cause an error status of to be returned." ::= { media1 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.3 media1-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 1 that have been printed. The device POS should state whether this value is lost across a power cycle or kept in NVRAM. Additional information: For LaserJet 4050 Series this page count is saved in NVRAM after every 10 pages. The maximum value is 4,294,967,295 which will never be reached in normal operation. The page count is incremented when a sheet of media is pulled from an input tray. A duplex printed sheet will cause this counter to be incremented by one. The data for this object is stored in NVRAM." ::= { media1 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.4 media1-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: The engine processing characteristics that are to be applied to this media type. Currently, 'engine processing characteristics' denotes changes to fusing temperature and/or transfer roller voltage. The data for this object is stored in NVRAM." ::= { media1 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2..38.1..4 START -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.1 media2-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 2 name. Additional information: See MEDIA1-NAME." ::= { media2 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.2 media2-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 2. Additional information: See MEDIA1-SHORT-NAME." ::= { media2 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.3 media2-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 2 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media2 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.4 media2-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 2. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media2 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.1 media3-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 3 name. Additional information: See MEDIA1-NAME." ::= { media3 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.2 media3-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 3. Additional information: See MEDIA1-SHORT-NAME." ::= { media3 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.3 media3-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 3 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media3 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.4 media3-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 3. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media3 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.1 media4-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 4 name. Additional information: See MEDIA1-NAME." ::= { media4 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.2 media4-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 4. Additional information: See MEDIA1-SHORT-NAME." ::= { media4 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.3 media4-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 4 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media4 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.4 media4-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 4. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media4 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.1 media5-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 5 name. Additional information: See MEDIA1-NAME." ::= { media5 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.2 media5-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 5. Additional information: See MEDIA1-SHORT-NAME." ::= { media5 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.3 media5-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 5 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media5 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.4 media5-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 5. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media5 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.1 media6-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 6 name. Additional information: See MEDIA1-NAME." ::= { media6 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.2 media6-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 6. Additional information: See MEDIA1-SHORT-NAME." ::= { media6 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.3 media6-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 6 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media6 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.4 media6-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 6. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media6 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.1 media7-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 7 name. Additional information: See MEDIA1-NAME." ::= { media7 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.2 media7-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 7. Additional information: See MEDIA1-SHORT-NAME." ::= { media7 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.3 media7-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 7 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media7 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.4 media7-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 7. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media7 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.1 media8-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 8 name. Additional information: See MEDIA1-NAME." ::= { media8 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.2 media8-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 8. Additional information: See MEDIA1-SHORT-NAME." ::= { media8 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.3 media8-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 8 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media8 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.4 media8-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 8. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media8 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.1 media9-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 9 name. Additional information: See MEDIA1-NAME." ::= { media9 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.2 media9-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 9. Additional information: See MEDIA1-SHORT-NAME." ::= { media9 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.3 media9-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 9 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media9 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.4 media9-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 9. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media9 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.1 media10-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 10 name. Additional information: See MEDIA1-NAME." ::= { media10 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.2 media10-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 10. Additional information: See MEDIA1-SHORT-NAME." ::= { media10 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.3 media10-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 10 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media10 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.4 media10-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 10. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media10 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.1 media11-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 11 name. Additional information: See MEDIA1-NAME." ::= { media11 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.2 media11-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 11. Additional information: See MEDIA1-SHORT-NAME." ::= { media11 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.3 media11-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 11 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media11 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.4 media11-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 11. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media11 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.1 media12-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 12 name. Additional information: See MEDIA1-NAME." ::= { media12 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.2 media12-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 12. Additional information: See MEDIA1-SHORT-NAME." ::= { media12 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.3 media12-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 12 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media12 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.4 media12-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 12. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media12 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.1 media13-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 13 name. Additional information: See MEDIA1-NAME." ::= { media13 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.2 media13-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 13. Additional information: See MEDIA1-SHORT-NAME." ::= { media13 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.3 media13-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 13 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media13 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.4 media13-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 13. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media13 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.1 media14-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 14 name. Additional information: See MEDIA1-NAME." ::= { media14 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.2 media14-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 14. Additional information: See MEDIA1-SHORT-NAME." ::= { media14 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.3 media14-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 14 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media14 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.4 media14-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 14. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media14 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.1 media15-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 15 name. Additional information: See MEDIA1-NAME." ::= { media15 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.2 media15-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 15. Additional information: See MEDIA1-SHORT-NAME." ::= { media15 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.3 media15-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 15 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media15 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.4 media15-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 15. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media15 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.1 media16-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 16 name. Additional information: See MEDIA1-NAME." ::= { media16 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.2 media16-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 16. Additional information: See MEDIA1-SHORT-NAME." ::= { media16 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.3 media16-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 16 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media16 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.4 media16-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 16. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media16 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.1 media17-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 17 name. Additional information: See MEDIA1-NAME." ::= { media17 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.2 media17-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 17. Additional information: See MEDIA1-SHORT-NAME." ::= { media17 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.3 media17-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 17 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media17 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.4 media17-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 17. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media17 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.1 media18-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 18 name. Additional information: See MEDIA1-NAME." ::= { media18 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.2 media18-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 18. Additional information: See MEDIA1-SHORT-NAME." ::= { media18 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.3 media18-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 18 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media18 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.4 media18-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 18. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media18 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.1 media19-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 19 name. Additional information: See MEDIA1-NAME." ::= { media19 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.2 media19-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 19. Additional information: See MEDIA1-SHORT-NAME." ::= { media19 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.3 media19-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 19 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media19 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.4 media19-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 19. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media19 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20.1 media20-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 20 name. Additional information: See MEDIA1-NAME." ::= { media20 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20.2 media20-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 20. Additional information: See MEDIA1-SHORT-NAME." ::= { media20 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20.3 media20-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 20 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media20 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20.4 media20-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 20. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media20 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21.1 media21-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 21 name. Additional information: See MEDIA1-NAME." ::= { media21 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21.2 media21-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 21. Additional information: See MEDIA1-SHORT-NAME." ::= { media21 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21.3 media21-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 21 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media21 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21.4 media21-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 21. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media21 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22.1 media22-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 22 name. Additional information: See MEDIA1-NAME." ::= { media22 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22.2 media22-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 22. Additional information: See MEDIA1-SHORT-NAME." ::= { media22 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22.3 media22-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 22 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media22 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22.4 media22-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 22. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media22 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23.1 media23-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 23 name. Additional information: See MEDIA1-NAME." ::= { media23 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23.2 media23-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 23. Additional information: See MEDIA1-SHORT-NAME." ::= { media23 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23.3 media23-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 23 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media23 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23.4 media23-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 23. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media23 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24.1 media24-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 24 name. Additional information: See MEDIA1-NAME." ::= { media24 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24.2 media24-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 24. Additional information: See MEDIA1-SHORT-NAME." ::= { media24 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24.3 media24-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 24 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media24 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24.4 media24-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 24. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media24 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25.1 media25-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 25 name. Additional information: See MEDIA1-NAME." ::= { media25 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25.2 media25-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 25. Additional information: See MEDIA1-SHORT-NAME." ::= { media25 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25.3 media25-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 25 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media25 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25.4 media25-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 25. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media25 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26.1 media26-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 26 name. Additional information: See MEDIA1-NAME." ::= { media26 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26.2 media26-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 26. Additional information: See MEDIA1-SHORT-NAME." ::= { media26 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26.3 media26-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 26 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media26 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26.4 media26-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 26. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media26 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27.1 media27-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 27 name. Additional information: See MEDIA1-NAME." ::= { media27 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27.2 media27-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 27. Additional information: See MEDIA1-SHORT-NAME." ::= { media27 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27.3 media27-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 27 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media27 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27.4 media27-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 27. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media27 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28.1 media28-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 28 name. Additional information: See MEDIA1-NAME." ::= { media28 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28.2 media28-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 28. Additional information: See MEDIA1-SHORT-NAME." ::= { media28 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28.3 media28-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 28 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media28 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28.4 media28-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 28. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media28 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29.1 media29-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 29 name. Additional information: See MEDIA1-NAME." ::= { media29 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29.2 media29-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 29. Additional information: See MEDIA1-SHORT-NAME." ::= { media29 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29.3 media29-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 29 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media29 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29.4 media29-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 29. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media29 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30.1 media30-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 30 name. Additional information: See MEDIA1-NAME." ::= { media30 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30.2 media30-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 30. Additional information: See MEDIA1-SHORT-NAME." ::= { media30 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30.3 media30-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 30 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media30 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30.4 media30-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 30. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media30 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31.1 media31-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 31 name. Additional information: See MEDIA1-NAME." ::= { media31 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31.2 media31-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 31. Additional information: See MEDIA1-SHORT-NAME." ::= { media31 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31.3 media31-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 31 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media31 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31.4 media31-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 31. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media31 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.32.1 media32-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 32 name. Additional information: See MEDIA1-NAME." ::= { media32 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.32.2 media32-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 32. Additional information: See MEDIA1-SHORT-NAME." ::= { media32 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.32.3 media32-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 32 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media32 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.32.4 media32-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 32. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media32 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.33.1 media33-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 33 name. Additional information: See MEDIA1-NAME." ::= { media33 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.33.2 media33-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 33. Additional information: See MEDIA1-SHORT-NAME." ::= { media33 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.33.3 media33-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 33 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media33 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.33.4 media33-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 33. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media33 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.34.1 media34-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 34 name. Additional information: See MEDIA1-NAME." ::= { media34 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.34.2 media34-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 34. Additional information: See MEDIA1-SHORT-NAME." ::= { media34 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.34.3 media34-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 34 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media34 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.34.4 media34-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 34. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media34 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.35.1 media35-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 35 name. Additional information: See MEDIA1-NAME." ::= { media35 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.35.2 media35-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 35. Additional information: See MEDIA1-SHORT-NAME." ::= { media35 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.35.3 media35-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 35 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media35 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.35.4 media35-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 35. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media35 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.36.1 media36-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 36 name. Additional information: See MEDIA1-NAME." ::= { media36 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.36.2 media36-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 36. Additional information: See MEDIA1-SHORT-NAME." ::= { media36 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.36.3 media36-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 36 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media36 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.36.4 media36-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 36. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media36 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.37.1 media37-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 37 name. Additional information: See MEDIA1-NAME." ::= { media37 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.37.2 media37-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 37. Additional information: See MEDIA1-SHORT-NAME." ::= { media37 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.37.3 media37-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 37 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media37 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.37.4 media37-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 37. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media37 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.38.1 media38-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 38 name. Additional information: See MEDIA1-NAME." ::= { media38 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.38.2 media38-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 38. Additional information: See MEDIA1-SHORT-NAME." ::= { media38 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.38.3 media38-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 38 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media38 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.38.4 media38-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 38. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media38 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.39.1 media39-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 39 name. Additional information: See MEDIA1-NAME." ::= { media39 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.39.2 media39-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 39. Additional information: See MEDIA1-SHORT-NAME." ::= { media39 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.39.3 media39-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 39 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media39 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.39.4 media39-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 39. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media39 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.40.1 media40-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 40 name. Additional information: See MEDIA1-NAME." ::= { media40 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.40.2 media40-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 40. Additional information: See MEDIA1-SHORT-NAME." ::= { media40 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.40.3 media40-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 40 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media40 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.40.4 media40-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 40. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media40 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.41.1 media41-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..24)) ACCESS read-only STATUS optional DESCRIPTION "Media 41 name. Additional information: See MEDIA1-NAME." ::= { media41 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.41.2 media41-short-name OBJECT-TYPE SYNTAX DisplayString (SIZE(1..9)) ACCESS read-only STATUS optional DESCRIPTION "Length restricted version of the media name 41. Additional information: See MEDIA1-SHORT-NAME." ::= { media41 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.41.3 media41-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Number of sheets of media 41 that have been printed. Additional information: See MEDIA1-PAGE-COUNT." ::= { media41 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.41.4 media41-engine-media-mode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The engine processing characteristics that are to be applied to media 41. The processing characteristics are device specific. Additional information: See MEDIA1-ENGINE-MEDIA-MODE." ::= { media41 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2..41.1..4 END -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.4 held-job-enable OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-write STATUS optional DESCRIPTION " Enables or disables Job Retention (Job Hold). The valid values are eDisabled and eEnabled. (Specifying an invalid mode causes an error to be returned.) When eDisabled is specified all Job Retention (Hold, Proof, Store, PIN Printing) is disabled. When eEnabled is specified, the Job Retention characteristics of a given job are defined by the PJL variable SET HOLD" ::= { held-job-control 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.65 power-state OBJECT-TYPE SYNTAX INTEGER { ePowerStateAwake(1), ePowerStatePowerSave(2), ePowerStateSleep(3), ePowerStateOff(4), ePowerStateTransitioningToAwake(5), ePowerStateTransitioningToPowerSave(6), ePowerStateTransitioningToSleep(7), ePowerStateTransitioningToOff(8), ePowerStateReboot(9), ePowerStateAutoOff(10), ePowerState1Watt(11) } ACCESS read-write STATUS optional DESCRIPTION " This object is used to inquire about and to control the 'power state' of the device. The exact meaning of each enumeration may vary from device to device, but the general interpretation is as follows: ePowerStateAwake: The device is idle (immediately ready to process a job) or processing a job. ePowerStatePowerSave: The device is in a low power state and will not be immediately available to process an incoming job. A 'warm-up time' of several seconds can be expected. ePowerStateSleep: The device is in a sleep state. It uses less power than when in the power save state. It can also be expected to need a substantially longer warm-up time than when in the power save state. ePowerStateOff: The device is powered off. Note that when the device is powered off then SNMP/PML requests obviously cannot be honored. Therefore ePowerStateOff will likely never be returned from a PML get operation. However, ePowerStateOff could potentially be used in a PML set operation to power down the device if it has a software/firmware controllable power switch. For a given product it may not be possible to have the device enter the requested state due to the current state of the device. E.g., it may not be possible to enter the power save state if the device currently is in the sleep state. In this case a set operation will have an execution outcome of . The same execution outcome can be expected if the device is processing a job and an attempt is made to e.g. bring the device into the power save state or the sleep state. A get operation on the object returns the current power state of the device. While the device is transitioning from one state to another one of the values ePowerStateTransitioningToAwake, ePowerStateTransitioningToPowerSave, ePowerStateTransitioningToSleep or ePowerStateTransitioningToOff will be returned from a PML get operation. An attempt to perform a PML set with any of these four values will yield " ::= { settings-system 65 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.15 encryption-password-type OBJECT-TYPE SYNTAX INTEGER { eFalse(0), eTrue(1) } ACCESS read-write STATUS optional DESCRIPTION "This Object will allow the Customer to query for the supported encryption type. Its value will be set to AlphaNumeric (Value as 1) if password can be alphanumeric and Numeric (Value as 0) otherwise." ::= { settings-job 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.16 encryption-password-max-length OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "This Object will allow the Customer to query for the max password length of a secure encrypted job supported by the device. Its value will be set to 12 for 4-line devices and 32 for all others." ::= { settings-job 16 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.17 encryption-password-min-length OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "This Object will allow the Customer to query for the min password length of a secure encrypted job supported by the device. Its value will be set to 4." ::= { settings-job 17 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.18 job-storage-supported OBJECT-TYPE SYNTAX INTEGER { eFalse(0), eTrue(1) } ACCESS read-write STATUS optional DESCRIPTION "This object returns eTrue(1) if job storage is supported on this device and eFalse(0) if job storage is not supported. USE: The client or driver can query this object in order to determine whether job storage is supported." ::= { settings-job 18 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.19 job-storage-type OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "This object indicates what kind of stored job types this device supports. A returned value of none indicates that the job storage is not supported. A returned value of retentive indicates that stored jobs are retained across a power cycle. A returned value of volatile indicates that stored jobs will be lost when a power-cycle occurs. In case device supports multiple Job Storage types, it would return the comma separated string with all supported values e.g. retentive,volatile USE: The client or driver can query this object to determine whether the device has the capability to retain stored jobs across a power cycle." ::= { settings-job 19 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.20 job-storage-mode OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "This object indicates what kind of stored job modes this device supports. A returned value of none indicates that the device does not support job storage. A returned value of save-only indicates that the device is configured for save only mode. A returned value of print-save indicates that the device supports Print and Save mode. In case device supports multiple Job Storage modes, it would return the comma separated string with all supported values e.g.save-only,print-save. Save-only job storage mode indicates that jobs would be stored on device, while print-save mode indicates that job would be printed as well stored on device. USE The client or driver can query this object to see whether the printer has the capability to store jobs or to store and print jobs." ::= { settings-job 20 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.21 job-storage-available OBJECT-TYPE SYNTAX INTEGER { eFalse(0), eTrue(1) } ACCESS read-write STATUS optional DESCRIPTION "This object indicates whether job storage is available on the device. The default is eTrue(1) but if storage is not available for any reason the return value will be eFalse(0). USE The client or driver can query object to see if job storage is available." ::= { settings-job 21 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.22 job-storage-encryption OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "This object indicates the kind of encryption supported by device. USE The client or driver can query this object to determine the kind of encryption supported by this device. In case device supports multiple encryption types, it would return the comma separated string of all supported encryption types e.g. 'aes128,aes256'." ::= { settings-job 22 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 energy-star OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine has been idle for the number of seconds specified by this object. A value of zero means Energy Star is disabled and the device will not go to sleep based on print engine idle time. The value must be non-negative." ::= { settings-system 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 sleep-mode OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS read-write STATUS optional DESCRIPTION " Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sleep mode. Setting SLEEP-MODE to eTrue causes the device to go into sleep mode" ::= { settings-system 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.89 powersave-enable-type OBJECT-TYPE SYNTAX INTEGER { ePowerSaveOff(1), ePowerSaveUseSleepDelay(2), ePowerSaveUseSleepSchedule(3), ePowerSaveMaximize(4), ePowerSaveCustom(5) } ACCESS read-write STATUS optional DESCRIPTION " ePowerSaveOff - printer stays awake all the time, can only sleep if sleep button is hit. ePowerSaveUseSleepDelay - use sleep delay the old way, sleep schedule is ignored . ePowerSaveUseSleepSchedule - sleep delay time is ignored, stay awake in wake period, sleep in 15 minutes in sleep period. ePowerSaveMaximize - set the sleep delay to 15 minutes, so wether in wake or sleep period it will sleep in 15 minutes. ePowerSaveCustom - set the sleep delay to 45 minutes, use sleep delay during wake period, sleep in 15 minutes in sleep period." ::= { settings-system 89 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.19 eprint-opt-in OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " This object is the master switch for the ePrint feature. By default this should be eOff(1). This differs from EPRINT-ENABLED in that ePrint connot be registered with the cloud when this is diabled while EPRINT-ENABLED allows registration and temporary disablement" ::= { settings-system2 19 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.20 eprint-enabled OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " Returns the current setting of the ePrint feature" ::= { settings-system2 20 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.21 eprint-email-address OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " This is the configured ePrint email address" ::= { settings-system2 21 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.22 eprint-email OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " This object reports the current setting of ePrint e-mail" ::= { settings-system2 22 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.23 eprint-printer-code OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " This is the configured ePrint printer code" ::= { settings-system2 23 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.24 eprint-hp-web-services OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " This object reports the current setting of the ePrint web services" ::= { settings-system2 24 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.25 eprint-jdi-interface OBJECT-TYPE SYNTAX INTEGER { eJDIInterface1(1), eJDIInterface2(2), eJDIInterface3(3), eJDIInterface4(4), eJDIInterface5(5), eJDIInterface6(6), eJDIInterface7(7), eJDIInterface8(8), eJDIInterface9(9), eJDIInterface10(10) } ACCESS read-write STATUS optional DESCRIPTION " This number represents the instance of jdi that has ePrint registered" ::= { settings-system2 25 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.31 eprint-supported OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " This object is used to indicate whether the device supports ePrint or not. By default this should be eOff(1), but will be set to eOn(2) if the device supports ePrint" ::= { settings-system2 31 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.32 eprint-supported-jdi OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " This object is used to indicate whether the JDI supports ePrint or not. By default this should be eOff(1), but will be set to eOn(2) if JDI supports ePrint" ::= { settings-system2 32 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1.4 web-proxy-config-enable OBJECT-TYPE SYNTAX INTEGER { eOff(0), eOn(1) } ACCESS read-only STATUS optional DESCRIPTION " This object is a OCTET STRING enumeration which the peripheral uses to inform the JetDirect card that the Jet-Direct card embedded web server should display the web proxy configuration settings. The Jet Direct card web server will display the if and only if this object is both implemented and set to eOn. A peripheral may implement this object in order to have another host, like a JetDirect card, include a reference to the peripheral's web content. The peripheral will read the proxy configuration using the XIP2 sysInfo Get methods" ::= { settings-web-server 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.4 mio1-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eNonVolatileRandomAccessMemory(6), eFlashMemory(7), eDiskDrive(8), eRamRom(9), eInputPHD(10), eOutputPHD(11), eIOCard(12), eBindingPHD(13), eSDRandomAccessMemory(14), eSRandomAccessMemory(15), eFPMRandomAccessMemory(16), eEDORandomAccessMemory(17) } ACCESS read-only STATUS optional DESCRIPTION " Returns an indication of the type of option installed in MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the enumerations" ::= { mio1 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.3 mio1-manufacturing-info OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 1. May include serial number and firmware revision" ::= { mio1 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.2 mio1-model-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns product information identifying the I/O card. Example: XXXX " ::= { mio1 2 } mio2-model-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Returns product information identifying the I/O card. Example: XXXX." ::= { mio2 2 } mio2-manufacturing-info OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 2. May include serial number and firmware revision. Additional information: The format of the string returned is determined by the manufacturer of the EIO device. There is no standard for content of the string." ::= { mio2 3 } mio2-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eDiskDrive(8), eIOCard(12) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in MIO/EIO slot 2. See SIMM1-TYPE for an explanation of the enumerations." ::= { mio2 4 } mio3-model-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Returns product information identifying the I/O card. Example: XXXX." ::= { mio3 2 } mio3-manufacturing-info OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Returns information describing the manufacture of the I/O card installed in MIO/EIO interface 3. May include serial number and firmware revision. Additional information: The format of the string returned is determined by the manufacturer of the EIO device. There is no standard for content of the string." ::= { mio3 3 } mio3-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eDiskDrive(8), eIOCard(12) } ACCESS read-only STATUS optional DESCRIPTION "Returns an indication of the type of option installed in MIO/EIO interface 3. See SIMM1-TYPE for an explanation of the enumerations." ::= { mio3 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.4 mio4-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eNonVolatileRandomAccessMemory(6), eFlashMemory(7), eDiskDrive(8), eRamRom(9), eInputPHD(10), eOutputPHD(11), eIOCard(12), eBindingPHD(13), eSDRandomAccessMemory(14), eSRandomAccessMemory(15), eFPMRandomAccessMemory(16), eEDORandomAccessMemory(17) } ACCESS read-only STATUS optional DESCRIPTION " Returns an indication of the type of option installed in MIO/EIO interface 4. See SIMM1-TYPE for an explanation of the enumerations" ::= { mio4 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.3 mio4-manufacturing-info OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns information describing the manufacture of the I/O card installed in MIO/EIO interface 4. May include serial number and firmware revision" ::= { mio4 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.59 set-primary-interface-index OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Sets the index of the primary network interface to be used for outbound routing. Index 1 is EIO, 2 is wireless station, 3 is wireless access point and 4 is JDI." ::= { settings-system2 59 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.2 mio4-model-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns product information identifying the I/O card. Example: XXXX" ::= { mio4 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.60 wireless-direct-print-setting OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-write STATUS optional DESCRIPTION "Enable or disable wireless direct printing." ::= { settings-system2 60 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1 io-timeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel that received the data associated with the current print job. If an I/O timeout occurs, the PDL processing sub-system assumes all the data associated with the current print job has been received, and processes the end of job in a PDL specific manner. The POS specifies the supported values" ::= { settings-io 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.43 direct-connect-ports-enable OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2), eUnSupported(3) } ACCESS read-write STATUS optional DESCRIPTION " This object specifies whether all direct connect ports (parallel and USB) are available or ignored. JetDirect, embedded network connectivity, and third party add-on cards (such as Firewire) will be unaffected by setting this object" ::= { settings-system 43 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.5 usb-product-id OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Returns the Product ID of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2 . The value will be in the range 0..65535" ::= { usb 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.4 usb-vendor-id OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Returns the Vendor ID of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2 . The value will be in the range 0..65535" ::= { usb 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.2 io-switch OBJECT-TYPE SYNTAX INTEGER { eYes(1) } ACCESS read-only STATUS optional DESCRIPTION " Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel" ::= { settings-io 2 } port1-parallel-speed OBJECT-TYPE SYNTAX INTEGER { eSlow(1), eFast(2) } ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the maximum parallel I/O port speed, for port 1. This object is only supported if this port is a parallel port. An eSlow setting causes a 10 us busy pulse per received byte of data. An eFast setting causes a 1.5 us busy pulse per received byte of data. In rare cases, setting this value to eFast can cause the parallel port to no longer transfer data reliably. Additional information: When the value of this object is changed, it takes effect immediately. It is recommended that the printer be offline and not in a job when this object is changed." ::= { port1 4 } port1-parallel-bidirectionality OBJECT-TYPE SYNTAX INTEGER { eUnidirectional(1), eBidirectional(2) } ACCESS read-write STATUS optional DESCRIPTION "Returns or changes whether the parallel I/O port supports bidirectional communication for port 1. This object is only supported if this port is a parallel port. Additional information: A get on this object returns the current mode for the parallel port. Setting this object specifies whether or not bidirectional communications will be allowed." ::= { port1 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.1. usb-serial-number OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the serial number of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2" ::= { usb 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.2. usb-manufacturer-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Returns the description of the manufacturer of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2" ::= { usb 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.3. usb-product-description OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Returns the product description of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2" ::= { usb 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.6. usb-device-kind OBJECT-TYPE SYNTAX INTEGER { eUSBStorageDevice(1), eUSBNonStorageDevice(2), eUSBCompositeDevice(3), eUSBUnsupportedDevice(4) } ACCESS read-only STATUS optional DESCRIPTION " The USB-DEVICE-KIND object classifies a USB device into one of four broad categories: \ eUSBStorageDevice(1): The USB device is strictly a device for storing data. \ eUSBNonStorageDevice(2): The USB device has no storage capability (e.g., a card reader). \ eUSBCompositeDevice(3): The USB device has storage capability and additional functionality normally not associated with a storage device. \ eUSBUnsupportedDevice(4): The USB device was detected, but no driver exists for the device or the device draws more current than allowed. \" ::= { usb 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.7. usb-driver-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the name of the low-level USB driver supporting this device" ::= { usb 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.1 usb-host-supported OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS read-only STATUS optional DESCRIPTION " The USB Host protocol is supported by the device when the value returned is eTrue. The USB Host protocol is not supported when the value returned is eFalse" ::= { usb-interface 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.5 fw-rom-datecode OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Identifies the base device-system firmware date code. The date code will be encoded in the yyyymmdd format. There may be several versions of the base device-system firmware. The date code associated with the version of the base device-system firmware that is being used is reported. There may be other date code objects for other specific modules such as fonts, localization modules, etc.; these other datecode objects are device specific" ::= { id 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.6 fw-rom-revision OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This identifies the device-system code firmware ROM revision code. The format for a revision is major_revision.minor_revision. There may be other ROM revision code objects for other specific ROMs such as font ROMs, localization ROMs, etc; these other ROM revision code objects are device specific" ::= { id 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.68 factory-reset OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS optional DESCRIPTION "writing an INTEGER 0 will do factory reset on system variables, MFP Settings and the .NET database without a reboot." ::= { settings-system 68 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.5 usage-instructions-line1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " The first line of usage instructions for the device user.Appears on Line 1 of the usage page" ::= { printer-accounting 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.6 usage-instructions-line2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " The second line of usage instructions for the device user.Appears on Line 1 of the usage page" ::= { printer-accounting 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.7 usage-instructions-line3 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " The third line of usage instructions for the device user.Appears on Line 1 of the usage page" ::= { printer-accounting 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.8 usage-instructions-line4 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " The fourth line of usage instructions for the device user.Appears on Line 1 of the usage page" ::= { printer-accounting 8 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.10 hold-job-timeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " The time, in minutes, that the printer will wait before automatically deleting a held job. This allows the printer to automatically clean up jobs that have been forgotten (held but never released)" ::= { settings-job 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.1. held-job-user-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " User name that is obtained by the driver through some internal method or from user input" ::= { held-job-info 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.2. held-job-job-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " The job name may be generated by the driver or obtained from user input" ::= { held-job-info 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.3. held-job-retention OBJECT-TYPE SYNTAX INTEGER { eHoldOff(1), eHoldOn(2), eHoldStore(3), eHoldProof(4) } ACCESS read-only STATUS optional DESCRIPTION " Indicates the retention classification of the job. The values indicate whether the job is printed immediately or stored. There are 4 options: \\ eHoldOff: The job is printed but not retained on the disk. \\ eHoldOn: The job is printed and stored temporarily on the disk. \\ eHoldStore: The job is not printed but stored on the disk. \\ eHoldProof: One copy of the job is printed and the remaining copies are stored on the disk. \\" ::= { held-job-info 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.4. held-job-security OBJECT-TYPE SYNTAX INTEGER { eHoldTypePublic(1), eHoldTypePrivate(2) } ACCESS read-only STATUS optional DESCRIPTION " The variable specifies the security level of the job. \\ eHoldTypePublic: The job does not require a PIN in order to release the job for printing. \\ eHoldTypePrivate: The job requires a PIN in order to be released for printing. \\" ::= { held-job-info 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.5. held-job-quantity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Number of copies to print" ::= { held-job-info 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.6. held-job-pin OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " A OCTET STRING that is specified in the job stream and then required to be entered in order to release the job for printing. PIN stands for Personal Identification Number" ::= { held-job-info 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.1 held-job-print OBJECT-TYPE SYNTAX OCTET STRING ACCESS write-only STATUS optional DESCRIPTION " Instructs the printer to schedule the specified held job for printing with the specified number of copies. The job-id is used to identify which job to print. A held job can also be printed from the control panel" ::= { held-job-control 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.2 held-job-delete OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS optional DESCRIPTION " Instructs the printer to delete the specified held job from the list. The job-id is used to identify which job to delete. A held job can also be deleted from the control panel" ::= { held-job-control 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.3 held-job-set-queue-size OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Sets the maximum number of jobs which can be stored in the held job list" ::= { held-job-control 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 on-off-line OBJECT-TYPE SYNTAX INTEGER { eOnline(1), eOffline(2), eOfflineAtEndOfJob(3) } ACCESS read-write STATUS optional DESCRIPTION " To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off line. PML communication persists" ::= { status-system 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.3 job-info-change-id OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns the current value of an object in the job-info sub-tree whose value has changed. Define the object identifier for the object whose value has changed as job-info.required-field.optional-field.job-id. job-info represents the OID prefix of all objects in the job-info sub-tree. Required-field represents the OID field value that follows the job-info prefix. Since some objects in the job-info sub-tree have two OID fields between the job-info prefix and the job-id, the optional-field represents the OID field between the required-field and the job-id field, if present. Using this definition, the format for the JOB-INFO-CHANGE-ID OCTET STRING value can be described as follows: \\ Bytes 0-3 : required-field \\ Bytes 4-7 : optional-field, or all zeros if there \\ is no optional field \\ Bytes 8-11: Job ID. \\ Bytes 12-n : The value of the object job-info. required-field.optional-field.job-id. \\ All multi-byte values stored in Motorola (big-endian) format, where the most significant byte occurs first" ::= { settings-job 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.2 cancel-job OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Cancels the print job whose ID matches the value written to the CANCEL-JOB object. The host first learns the job ID using the CURRENT-JOB-PARSING-ID command. If the printer has completely processed the job, the printer responds with . If the value of the CURRENT-JOB-PARSING-ID is smaller than the value written to the CANCEL-JOB object, then the printer responds with . When read, returns the value of the last job ID what was canceled, or -1 to indicate no job has been canceled" ::= { settings-job 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1 rpc-test-return-code OBJECT-TYPE SYNTAX OCTET STRING ACCESS write-only STATUS optional DESCRIPTION "This test object that will not be supported in any released product. Setting this object allows the next RPC call return code to be specified. The POS will specify the binary format. Additional information: The format of the binary data is a one of three formats. The first format is no binary data, which indicates the next RPC reply should not be modified. The other two formats are described in RFC 1057 and encoded using XDR (i.e. the value is the data used to instead of the actual RPC reply). The second format is when reply_stat is MSG_ACCEPTED and accept_stat is something other than SUCCESS. The third format is when reply_stat is MSG_DENIED. Notice that all RPC replies that do not contain any 'results' are supported." ::= { settings-rpc 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2 rpc-bind-protocol-address OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Array of Berkeley sockets style protocol addresses used to bind RPC to a communications protocol family. Setting an instance of this array object to a zero length binary value disables the transport protocol indicated by that instance. All multi-bytes fields are in network (or big-endian) order. Bytes 1 and 2 indicate the transport protocol. Some of the transport protocol mapping information can be found in RFC 1010 Assigned Numbers. A list of interesting transport protocol number mappings include: Protocol | Number ---------+------- UDP/IP | 17 IPX | 1000 MLC | 4660 Bytes 3 and 4 indicate the address family. The address family uses the same mapping as the BSD sockets address family. A list of interesting address family mappings include: Address Family | Number ---------------+------- Internet | 2 NetWare | 6 MLC | 22136 The format the fifth and following bytes is dependent on the address family. For the Internet address family, bytes 5 and 6 contain the port number, bytes 7 through 10 contain the IP address, and the following eight bytes are unused. For NetWare, bytes 5 through 8 are the network number, bytes 9 through 14 are the node number, and bytes 15 and 16 are the socket number. Additional information: The length of the binary value is zero if the instance of an object in the rpc-bind-protocol-address array is not in use. An unfortunate side effect of the implementation is initializing the mass storage device sets this object back to the factory default value. Returns status if attempting to access this object and there is no storage device is installed." ::= { settings-rpc 2 } rpc-bound-protocol-address OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "An array of Berkeley sockets style protocol addresses that the NFS service has been bound to successful. The format is that same as the array of RPC-BIND-PROTOCOL-ADDRESS of objects. Additional information: Returns status if attempting to access this object and there is no storage device is installed." ::= { status-rpc 3 } file-system-max-open-files OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The number of open files allowed at one time. Opening a file when the maximum number of files are currently open will fail. Additional information: Indicates the number of open files a personality (e.g. PCL or PostScript) is guaranteed to be able to open before the file system runs out of file handles. This object is between 1 and 500. Returns status if attempting to access this object and there is no storage device is installed." ::= { settings-file-system 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.47 fax-init-at-command OBJECT-TYPE SYNTAX OCTET STRING ACCESS write-only STATUS optional DESCRIPTION "This custom fax modem commands will be executed on the modem every time a fax modem is initialized along with the predefined set of commands " ::= { settings-system2 47 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.83 scanner-accessory-digital-send-config-fax-embedded OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Indicates if the analog fax device is available. " ::= { settings-scanner 83 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.15 fax-notification-available OBJECT-TYPE SYNTAX INTEGER { eNotAvailable(1), eAvailable(2) } ACCESS read-only STATUS optional DESCRIPTION "To check if the embedded Fax accessory or the Fax Service available on the device supports Notification for Faxes Sent " ::= { status-fax-proc-sub 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.14 pcfax-send-operational OBJECT-TYPE SYNTAX INTEGER { eNonOperational(1), eOperational(2) } ACCESS read-only STATUS optional DESCRIPTION "To check if a fax can be sent from a PC to the device. This checks if a Fax service is supported on the MFP and if the administrator has enabled PC Fax Send for the device. Additional return types may be supported later to indicate why PC Fax Send is not operational on the device " ::= { status-fax-proc-sub 14 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.1 toner-miser-plus-value OBJECT-TYPE SYNTAX OCTET STRING ACCESS write-only STATUS optional DESCRIPTION " This object is used to enable/disable toner miser plus feature" ::= { settings-system2 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.2 toner-miser-plus-supported OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-only STATUS optional DESCRIPTION " The supported values are ON and OFF. The toner miser plus feature is turned OFF by default" ::= { settings-system2 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.2.2 phd2-device-specific-command OBJECT-TYPE SYNTAX OCTET STRING ACCESS write-only STATUS optional DESCRIPTION " This object is used to send device-specific data to the paper handling device. The meaning of the device-specific command is dependent on the paper handling device and must be specified in the POS. If the paper handling device does not accept the command, then an will be returned. If the device accepts the command, it may still be processing the command after the response has been returned. Depending on the device, the application may need to query PHDx-DEVICE-MEMORY to see when the command has completed" ::= { ph2 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.99 start-engine-early-warmup OBJECT-TYPE SYNTAX INTEGER { eValue1(1) } ACCESS write-only STATUS mandatory DESCRIPTION " This PML object is used by HP SW drivers to signal the printer that a job is coming, and to start the warm-up process early.The effect of warming up early will reduce the First Page Out time" ::= { settings-system 99} -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.101 enable-engine-early-warmup OBJECT-TYPE SYNTAX INTEGER { eDisable(1), eEnable(2) } ACCESS read-write STATUS optional DESCRIPTION " This PML object is used by HP SW to enable/disable the printer to send the signal of warm-up process early to engine. The effect of warming up early will reduce the First Page Out time" ::= { settings-system 101 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.5 print-density OBJECT-TYPE SYNTAX INTEGER(0..10) ACCESS read-write STATUS optional DESCRIPTION " Returns or sets the print density setting. Print density is the instantaneous amount of marking agent applied to the paper while printing. A value of zero has the lowest print density, yielding a lighter page. A value of 10 has the highest print density, yielding a darker page. Each POS should document what values in the 0 to 10 range are supported" ::= { settings-prt-eng 5 } marking-agent-density-setting OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or sets the marking agent density setting for each of the marking agents installed. The Marking Agent (aka Print) density is the instantaneous amount of marking agent applied to the media while printing. A value of zero has the lowest print density, yielding a lighter page. A value of 10 has the highest print density, yielding a darker page. The device POS will document what values are supported. Additional information: See the description for PRINT-DENSITY ." ::= { marking-agent-density 1 } autocleaning-page-enable OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-write STATUS optional DESCRIPTION "When set to eEnabled this object will enable the periodic printing of a page designed to clean the fuser on an EP printing system. The interval between cleaning pages is determied by the setting of the AUTOCLEANING-PAGE-FREQUENCY object and the media size is determined by the AUTOCLEANING-PAGE-SIZE object. This object could also be used in the future to clean the inkjet heads on an inkjet system. Additional information: This will ship disabled for the LaserJet 4100 product." ::= { settings-prt-eng 10 } autocleaning-page-frequency OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Controls the number of pages between printing of the auto cleaning page (if enabled). Any device specific 'snap' behavior for this page interval will be specified in the device pos. Additional information: For the LaserJet 4100 product the legal values are 1000, 2000, 5000, 10000, and 20000. All other values will return OK_or_NEAREST_LEGAL_VALUE_SUBSTITUTED." ::= { settings-prt-eng 11 } autocleaning-page-size OBJECT-TYPE SYNTAX INTEGER { eUSLetter(2), eISOandJISA4(26) } ACCESS read-write STATUS optional DESCRIPTION "Controls the size of paper used to print the auto cleaning page (if enabled). Additional information: For the LaserJet 4100 product the legal values are Letter and A4. All other values should return PML_ERROR_INVALID_OR_UNSUPPORTED_VALUE." ::= { settings-prt-eng 12 } print-engine-revision OBJECT-TYPE SYNTAX DisplayString (SIZE(1..16)) ACCESS read-only STATUS optional DESCRIPTION "Print engine revision string. Additional information: The symbol set for this string is Roman-8. Converts engine revision number to a string and returns it." ::= { status-prt-eng 26 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.20 formatter-serial-number OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " This object returns the formatter serial number for the device. The value returned from this object is the FORMATTERNUMBER device-system variable. If possible, encode the serial number in a symbol set (like Roman-8) that matches the ASCII character set and limit the characters used to ASCII characters" ::= { id 20 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.2 input-tray-auto-select OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " Indicates if the device will automatically try to load media from the next input media tray in the auto-select sequence (defined by each device) when it cannot load media from the current tray. Locked trays will not be permitted in the auto-select sequence. This object has no meaning if there is only one unlocked input media tray" ::= { settings-intray 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.8 custom-paper-feed-dim OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Sets the printer's custom paper dimension in the feed direction (direction parallel to the direction of paper feeding). The value for this object is specified in micrometers or tenthousandths of an inch, depending upon the value of CUSTOM-PAPER-DIM-UNIT. The valid range is engine-dependent and should be documented in the POS for each product. Additional information: Get/Set custom paper dimension (height). The return/set value is either in micrometers or 10,000ths of inches. A tray has to be in custom switch or without media size sensor to be able to set the custom dimension. If it is successfully setting the dimension value, the size of a tray is set to CUSTOM." ::= { settings-intray 8 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.9 custom-paper-xfeed-dim OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Sets the printer's custom paper dimension in the cross-feed direction (direction ninety degrees relative to the direction of paper feeding). The value for this object is specified in micrometers or tenthousandths of an inch, depending upon the value of CUSTOM-PAPER-DIM-UNIT. The valid range is engine-dependent and should be documented in the POS for each product. Additional information: Get/Set custom paper dimension (width). The return/set value is either in micrometers or 10,000ths of inches. A tray has to be in custom switch or without media size sensor to be able to set the custom dimension. If it is successfully setting the dimension value, the size of a tray is set to CUSTOM." ::= { settings-intray 9 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.10 default-custom-paper-dim-unit OBJECT-TYPE SYNTAX INTEGER { eTenThousandthsOfInches(3), eMicrometers(4) } ACCESS read-write STATUS optional DESCRIPTION " The units of measure used to specify the width and height of the printer's default custom paper size. The unit of measure of eTenThousandthsOfInches is 0 001 inches" ::= { settings-intray 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.2 phd2-manufacturing-info OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns information describing the manufacture of PHD 2. May include serial number and firmware revision" ::= { phd2 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.1 phd2-model OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns product information identifying PHD device 2. Example: XXXX" ::= { phd2 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.4 phd2-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object" ::= { phd2 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.3 phd2-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eNonVolatileRandomAccessMemory(6), eFlashMemory(7), eDiskDrive(8), eRamRom(9), eInputPHD(10), eOutputPHD(11), eIOCard(12), eBindingPHD(13), eSDRandomAccessMemory(14), eSRandomAccessMemory(15), eFPMRandomAccessMemory(16), eEDORandomAccessMemory(17) } ACCESS read-only STATUS optional DESCRIPTION " Returns an indication of the type of option installed in PHD interface 2. See SIMM1-TYPE for an explanation of the enumerations" ::= { phd2 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.97 large-size-media-default-grain-direction OBJECT-TYPE SYNTAX INTEGER { eShortGrain(1), eLongGrain(2) } ACCESS read-write STATUS optional DESCRIPTION " This object identifies default grain direction for large size media (B/A3) only. Default value is eShortGrain" ::= { settings-system 97 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.5 phd2-number-of-options OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object will return the number of finishing options supported by this object. interaction For each option supported, there will be a corresponding sub array object for the PHD2-OPTIONS-MODEL and PHD2-OPTIONS-DESCRIPTION." ::= { phd2 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.6. phd2-options-model OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "If the external paper handling device (PHD) supports at least one (1) finishing option, then this object will exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER should be returned. Each finishing object supported by the PHD will be represented by a different sub-array element. The sub-array element returns the MODEL NUMBER of the finishing option supported, such as Booklet Making or Punching. This may be in the form of C115997 or other types of model numbers. INTERACTION For each sub-array element, there is a corresponding element in the PHD2-OPTIONS-DESCRIPTION object. See the PHD2-OPTIONS-DESCRIPTION object description for more information" ::= { phd2 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.7. phd2-options-description OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "If the external paper handling device (PHD) supports at least one (1) finishing option, then this object will exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER should be returned. Each finishing object supported by the PHD will be represented by a different sub-array element. The sub-array element returns a description of the finishing option supported, such as Booklet Making or Punching. INTERACTION :For each sub-array element, there is a corresponding element in the PHD2-OPTIONS-MODEL object. See the PHD2-OPTIONS-MODEL object description for more information" ::= { phd2 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.1.4 overflow-bin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Returns or sets the bin that will be used for additional sheets of media when the current bin is full and printing is allowed to continue" ::= { settings-outbin 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.1 outbin1-maximum-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Maximum capacity of the output bin, in sheets of 20 pound paper." ::= { outbin1 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.9 outbin1-override-mode OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: If cCancelJob is set, the current print job will be cancelled regardless of other item settings. If cOutbinFullOverride is set and this bin is the designated overflow bin (OVERFLOW-BIN = 1), then the bit is ignored. This object describes the action that is performed when the JOB-OUTPUT-AUTO-CONTINUE-TIMEOUT expires. If no bits are set, no override action is taken (the printer will continue to wait). The action performed by the CONTINUE object being set to eInitiateAction or the GO key being pressed on the control panel may cause different actions. See the CONTINUE object description for information on the actions that occur for those conditions." ::= { outbin1 9 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.10 outbin1-maximum-binding OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT-READY-DESTINATION-PRINT-ENGINE. Additional information: The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE." ::= { outbin1 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.12 device-configure-printer-parameters OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " Allow the printer to be configured as a duplex or simplex printer. There will be a <> encoded in this string and decoded by the printer firmware. If the <> check passes the printer will be configured accordingly" ::= { device-configure 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.1 self-test OBJECT-TYPE SYNTAX INTEGER { eNotInASelfTest(1), eNonDestructiveSelfTest(4) } ACCESS read-write STATUS optional DESCRIPTION "Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual self-test operation is device specific. A self test may not be allowed at any arbitrary time. If the device supports the requested self test, but can not start the execution of the self test when requested, the device will respond with . If a non-destructive self test is being started, the device will generate a response before the self test is completed. RECOMMENDATION: If the device is ready (i.e. the NOT-READY-PRINTER object does not contain any items, except maybe being off-line) and is idle (i.e. the NOT-IDLE object does not contain any items), this request should always succeed. This provides a mechanism for driver writers to always determine if the action will succeed or not. Additional information: The eNonDestructiveSelfTest performs limited testing on the printer and its attached paper handling devices. After the self-test is complete a configuration page is printed. The recommended way to cause a configuration page to be printed is to use the PRINT-INTERNAL-PAGE object. Setting this object to eNonDestructiveSelfTest results in a status of and a value of eNonDestructiveSelfTest being returned. If the printer is not idle (whether printing an external job or printing an internal page), this action will be delayed until the next job boundary. See the PRINT-INTERNAL-PAGE object for more details." ::= { test 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.7 engine-self-diagnostic OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " The ENGINE-SELF-DIAGNOSTIC object reveals current engine failures; it returns a OCTET STRING string of two-byte motor, clutch, solenoid, and sensor failure codes" ::= { test 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.8 engine-parameter OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " The ENGINE-PARAMETER object returns a device specific set of engine parameters as a OCTET STRING string of byte values. It will be necessary to have a decoder for each engine to interpret the data" ::= { test 8 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.2 phd3-manufacturing-info OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns information describing the manufacture of PHD 3. May include serial number and firmware revision" ::= { phd3 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.1 phd3-model OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Returns product information identifying PHD device 3. Example: XXXX" ::= { phd3 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.4 phd3-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object" ::= { phd3 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.3 phd3-type OBJECT-TYPE SYNTAX INTEGER { eEmpty(1), eUnknown(2), eUnSupported(3), eReadOnlyMemory(4), eVolatileRandomAccessMemory(5), eNonVolatileRandomAccessMemory(6), eFlashMemory(7), eDiskDrive(8), eRamRom(9), eInputPHD(10), eOutputPHD(11), eIOCard(12), eBindingPHD(13), eSDRandomAccessMemory(14), eSRandomAccessMemory(15), eFPMRandomAccessMemory(16), eEDORandomAccessMemory(17) } ACCESS read-only STATUS optional DESCRIPTION " Returns an indication of the type of option installed in PHD interface 3. See SIMM1-TYPE for an explanation of the enumerations" ::= { phd3 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.5 phd3-number-of-options OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object will return the number of finishing options supported by this object. INTERACTION :For each option supported, there will be a corresponding sub array object for the PHD3-OPTIONS-MODEL and PHD3-OPTIONS-DESCRIPTION" ::= { phd3 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.6. phd3-options-model OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "If the external paper handling device (PHD) supports at least one (1) finishing option, then this object will exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER should be returned. Each finishing object supported by the PHD will be represented by a different sub-array element. The sub-array element returns the MODEL NUMBER of the finishing option supported, such as Booklet Making or Punching. This may be in the form of C115997 or other types of model numbers. INTERACTION For each sub-array element, there is a corresponding element in the PHD3-OPTIONS-DESCRIPTION object. See the PHD3-OPTIONS-DESCRIPTION object description for more information" ::= { phd3 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.7. phd3-options-description OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "If the external paper handling device (PHD) supports at least one (1) finishing option, then this object will exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER should be returned. Each finishing object supported by the PHD will be represented by a different sub-array element. The sub-array element returns a description of the finishing option supported, such as Booklet Making or Punching. INTERACTION For each sub-array element, there is a corresponding element in the PHD3-OPTIONS-MODEL object. See the PHD3-OPTIONS-MODEL object description for more information" ::= { phd3 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 job-input-auto-continue-timeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error is the job requesting a media size that is not available. After the timeout expires, the device will continue processing the job as if a continue event occurred, such as the front panel continue key being pressed. If the value is -1, the device does not automatically continue after a job related continuable error occurs. If the value is 0, the device immediately continues. If the value is greater than 0, the value represents the timeout value in seconds" ::= { status-system 35 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 job-input-auto-continue-mode OBJECT-TYPE SYNTAX INTEGER { cCancelJob(0), cAutoMediaSizeOverride(1), cAutoMediaNameOverride(2), cUSMediaSizeOverride(3), cISOMediaSizeOverride(4) } ACCESS read-write STATUS optional DESCRIPTION " Returns or sets the device behavior when the desired media is not currently available. \\ cCancelJob - The device cancels the job. The device POS should explain what happens if this item is not the only item in the INTEGER. \\ cAutoMediaSizeOverride - The device is allowed to substitute a different size media. \\ cAutoMediaNameOverride - The device is allowed to substitute a different media name. \\ cUSMediaSizeOverride - The device is allowed to substitute US media sizes (letter, etc.) for ISO media sizes (A4, etc.). \\ cISOMediaSizeOverride - The device is allowed to substitute ISO media sizes (A4, etc.) for US media sizes (letter, etc.). \\" ::= { status-system 36 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 job-output-auto-continue-timeout OBJECT-TYPE SYNTAX INTEGER(-1..32767) ACCESS read-write STATUS optional DESCRIPTION " Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet of media to that output bin. When the timeout expires, the job is processed according to the OUTBINn-OVERRIDE-MODE. A value of -1 indicates that the printer will wait for a continue event. A non-negative value is the number of seconds to wait" ::= { status-system 40 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.28 duplex-blank-pages OBJECT-TYPE SYNTAX INTEGER { eDuplexBlankPagesAuto(1), eDuplexBlankPagesYes(2) } ACCESS read-write STATUS optional DESCRIPTION " When the value of the device-system variable is set to eDuplexBlankPagesAuto, it means to Smart Duplex in any of the specified conditions. This selection is logically equivalent to 'NO, do not duplex blank pages if not duplexing them obtains a performance enhancement'. When the value of the device-system variable is set to eDuplexBlankPagesYes, it means to disable Smart Duplexing" ::= { settings-prt-eng 28 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.31 mono-color-switching-mode OBJECT-TYPE SYNTAX INTEGER{ eNeverSwitch(1), eAlwaysSwitch(2), eLookAheadSwitch(3) } ACCESS read-write STATUS optional DESCRIPTION " This object allows the user to view/change the color/mono switching mode for a device" ::= { settings-system 31 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.1.1 tray-disable-use-instead OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-write STATUS optional DESCRIPTION " If this object is set to eEnabled, the paper mount message that is normally posted('To use another tray....') is turned off thereby disallowing the user to specify another tray from which paper can be taken for printing. However, on setting this object to eDisabled the paper mount message is posted allowing the user to specify another tray for paper feed" ::= { settings-ph 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.1 tray1-media-size-loaded OBJECT-TYPE SYNTAX INTEGER { eUSExecutive(1), eUSLetter(2), eUSLegal(3), eLedger(11), eISOandJISA4(26), eISOandJISA3(27), eJISB5(45), eJISB4(46), eJapanesePostcardSingle(71), eJapanesePostcardDouble(72), eMonarch(80), eCommercial10(81), eInternationalDL(90), eInternationalC5(91), eInternationalB5(100), eCustom(101) } ACCESS read-only STATUS optional DESCRIPTION "Returns the media size that is currently loaded in tray #1. This object can be set to indicate the media size currently loaded, if the printer supports input trays that can not sense the media size. Complete list of supported media sizes along with their dimensions are listed in the ``Media Size Table'' near the end of this document." ::= { intray1 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.2 tray1-media-available OBJECT-TYPE SYNTAX INTEGER(-1..100) ACCESS read-only STATUS optional DESCRIPTION "Returns a number that indicates how full the input tray is. If the device can only detect empty / not empty the device returns -1 for not empty and 0 for empty. If the device can determine how full the tray is, the device returns a percentage full from 0% to 100% Additional information: LaserJet 4V can only detect empty/not empty tray. It returns -1 for not empty and 0 for empty." ::= { intray1 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.3 tray1-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Returns the device specific name for tray 1." ::= { intray1 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.12 tray1-phd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Provides the number of the Paper Handling Device that contains this input tray. Additional information: The internal trays belong to device 0, which is the base engine. The envelope feeder (if supported) is considered to be device 1 and the external input devices can number between 2 and 6 depending on individual user configurations." ::= { intray1 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.13 tray1-fuser-temperature OBJECT-TYPE SYNTAX INTEGER(-1..1) ACCESS read-write STATUS optional DESCRIPTION "The fuser temperature to be used when printing media from Tray 1. The value zero is the default temperature. Values less than zero are progressively lower and values greater than zero are progressively higher. The range of values supported is device specific. Additional information: HP LaserJet 2100 Series supports 3 fuser temperatures. Zero (0) is the default temperature, one(1) is a higher temperature (for use on media like cardstock), negative one (-1) is a lower temperature (for use on media like transparencies). Setting to an unsupported value causes the printer to snap to the nearest supported value and to return status along with the actual value that was written. The snap values are as follows: <=-1 snaps to -1 >=1 snaps to 1" ::= { intray1 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.24. tray1-misprint-behavior-setting OBJECT-TYPE SYNTAX INTEGER { eNormalBehavior(1), eClassicBehavior(2) } ACCESS read-write STATUS optional DESCRIPTION "This object allows one to get/set the setting of the MISPRINT BEHAVIOR SETTING for Tray 1.This controls whether the classic misprint behavior is enabled" ::= { intray1 24 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.1 tray2-media-size-loaded OBJECT-TYPE SYNTAX INTEGER { eUSExecutive(1), eUSLetter(2), eUSLegal(3), eLedger(11), eISOandJISA4(26), eISOandJISA3(27), eJISB5(45), eJISB4(46), eJapanesePostcardSingle(71), eJapanesePostcardDouble(72), eMonarch(80), eCommercial10(81), eInternationalDL(90), eInternationalC5(91), eInternationalB5(100), eCustom(101) } ACCESS read-only STATUS optional DESCRIPTION "Returns the media size that is currently loaded in tray #2. This object can be set to indicate the media size currently loaded, if the printer supports input trays that can not sense the media size. Complete list of supported media sizes along with their dimensions are listed in the ``Media Size Table'' near the end of this document." ::= { intray2 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.2 tray2-media-available OBJECT-TYPE SYNTAX INTEGER(-1..100) ACCESS read-only STATUS optional DESCRIPTION "Returns a number that indicates how full the input tray is. If the device can only detect empty / not empty the device returns -1 for not empty and 0 for empty. If the device can determine how full the tray is, the device returns a percentage full from 0% to 100% Additional information: LaserJet 4V can only detect empty/not empty tray. It returns -1 for not empty and 0 for empty." ::= { intray2 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.3 tray2-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Returns the device specific name for tray 2." ::= { intray2 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.12 tray2-phd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Provides the number of the Paper Handling Device that contains this input tray." ::= { intray2 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.13 tray2-fuser-temperature OBJECT-TYPE SYNTAX INTEGER(-1..1) ACCESS read-write STATUS optional DESCRIPTION "The fuser temperature to be used when printing media from Tray 2. The value zero is the default temperature. Values less than zero are progressively lower and values greater than zero are progressively higher. The range of values supported is device specific. Additional information: See TRAY1-FUSER-TEMPERATURE." ::= { intray2 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.24. tray2-misprint-behavior-setting OBJECT-TYPE SYNTAX INTEGER { eNormalBehavior(1), eClassicBehavior(2) } ACCESS read-write STATUS optional DESCRIPTION "This object allows one to get/set the setting of the MISPRINT BEHAVIOR SETTING for Tray 2.This controls whether the classic misprint behavior is enabled" ::= { intray2 24 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.1 tray3-media-size-loaded OBJECT-TYPE SYNTAX INTEGER { eUSExecutive(1), eUSLetter(2), eUSLegal(3), eLedger(11), eISOandJISA4(26), eISOandJISA3(27), eJISB5(45), eJISB4(46), eJapanesePostcardSingle(71), eJapanesePostcardDouble(72), eMonarch(80), eCommercial10(81), eInternationalDL(90), eInternationalC5(91), eInternationalB5(100), eCustom(101) } ACCESS read-only STATUS optional DESCRIPTION "Returns the media size that is currently loaded in tray #3. This object can be set to indicate the media size currently loaded, if the printer supports input trays that can not sense the media size. Complete list of supported media sizes along with their dimensions are listed in the ``Media Size Table'' near the end of this document." ::= { intray3 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.2 tray3-media-available OBJECT-TYPE SYNTAX INTEGER(-1..100) ACCESS read-only STATUS optional DESCRIPTION "Returns a number that indicates how full the input tray is. If the device can only detect empty / not empty the device returns -1 for not empty and 0 for empty. If the device can determine how full the tray is, the device returns a percentage full from 0% to 100% Additional information: LaserJet 4V can only detect empty/not empty tray. It returns -1 for not empty and 0 for empty." ::= { intray3 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.3 tray3-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Returns the device specific name for tray 3." ::= { intray3 3 } tray3-phd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Provides the number of the Paper Handling Device that contains this input tray." ::= { intray3 12 } tray3-fuser-temperature OBJECT-TYPE SYNTAX INTEGER(-1..1) ACCESS read-write STATUS optional DESCRIPTION "The fuser temperature to be used when printing media from Tray 3. The value zero is the default temperature. Values less than zero are progressively lower and values greater than zero are progressively higher. The range of values supported is device specific. Additional information: See TRAY1-FUSER-TEMPERATURE." ::= { intray3 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.24. tray3-misprint-behavior-setting OBJECT-TYPE SYNTAX INTEGER { eNormalBehavior(1), eClassicBehavior(2) } ACCESS read-write STATUS optional DESCRIPTION "This object allows one to get/set the setting of the MISPRINT BEHAVIOR SETTING for Tray 3.This controls whether the classic misprint behavior is enabled" ::= { intray3 24 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 reprint OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2), eAuto(3) } ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the device will not attempt to reprint jammed pages. If eAuto, a device dependent algorithm (which should be documented in the POS) will be used to determine if the page gets reprinted. This object controls all PDLs, unless a specific PDL supports its own reprint control mechanism. To date, only PostScript has a PDL reprint control mechanism" ::= { settings-pdl 36 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.26 print-engine-revision OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Print engine revision string" ::= { status-prt-eng 26 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.11 default-custom-paper-feed-dim OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Sets the printer's default custom paper size dimension in the feed direction (direction parallel to the direction of paper feeding). The value for this object is specified in micrometers or tenthousandths of an inch, depending upon the value of DEFAULT-CUSTOM-PAPER-DIM-UNIT. The valid range is engine-dependent and should be documented in the POS for each product" ::= { settings-intray 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.12 default-custom-paper-xfeed-dim OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Sets the printer's default custom paper size dimension in the cross-feed direction (direction ninety degrees relative to the direction of paper feeding). The value for this object is specified in micrometers or tenthousandths of an inch, depending upon the value of DEFAULT-CUSTOM-PAPER-DIM-UNIT. The valid range is engine-dependent and should be documented in the POS for each product" ::= { settings-intray 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.14. input-tray-max-media-feed-dim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The maximum physical media size in the feed direction of this input device expressed in units of measure specified by INPUT- TRAY-MIN-MAX-DIM-UNIT. A value of (-1) implies 'unlimited', a value of (-2) implies 'unknown'" ::= { settings-intray 14 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.15. input-tray-max-media-xfeed-dim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The maximum physical media size across the feed direction of a particular input device expressed in units of measure specified by INPUT-TRAY-MIN-MAX-DIM-UNIT. A value of (-1) implies 'unlimited', a value of (-2) implies 'unknown'" ::= { settings-intray 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.16. input-tray-min-media-feed-dim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The minimum physical media size in the feed direction of a particular input device expressed in units of measure specified by PrtInputMinMaxDimUnit. A value of (-1) implies 'unlimited', a value of (-2) implies 'unknown'" ::= { settings-intray 16 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.17. input-tray-min-media-xfeed-dim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The minimum physical media size across the feed direction of a particular input device expressed in units of measure specified by PrtInputMinMaxDimUnit. A value of (-1) implies 'unlimited', a value of (-2) implies 'unknown'" ::= { settings-intray 17 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.18 manually-feed-prompt-test OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS read-write STATUS optional DESCRIPTION "Indicates if the Manual Feed Prompt will be displayed always (eTrue), or only if the tray is not loaded (eFalse). Additional information: Indicates if the Manual Feed Prompt will be displayed always (eFalse), or only if the tray is not loaded with the requested media. (eTrue)." ::= { settings-intray 18 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.19 tray-prompt OBJECT-TYPE SYNTAX INTEGER { eDoNotDisplay(1), eDisplay(2) } ACCESS read-write STATUS optional DESCRIPTION " If this object is set to eDisplay, whenever a paper tray is opened, refilled, and closed in a printer, the end user is prompted with a message 'To change size or type press check' on the control panel. If this object is set to eDoNotDisplay, then the end user will not be prompted with this message whenever a paper tray is opened, refilled, and closed in a printer" ::= { settings-intray 19 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 collated-originals-support OBJECT-TYPE SYNTAX INTEGER { cCollatedOriginals(0), cProofAndHold(1), cSecurityPrint(2), cAutoHighlight(3), cCollatedAtSpeed(4) } ACCESS read-only STATUS optional DESCRIPTION " Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability. \\ cCollatedOriginals - The printer can create multiple collated originals, or 'mopies'. This is the base functionality required by the other INTEGER items. \\ cProofAndHold - The printer saves a copy of the job while printing the first mopy. Later, this held job can be released and the rest of the mopies will print. \\ cSecurityPrint - The printer spools the job and holds the job until the user releases the job by entering a <> at the printer's control panel. \\ cAutoHighlight - The printer prints the job a number of times with a mail distribution list prepended to each job. A different mailing address is highlighted on each mopy. \\ cCollatedAtSpeed - The printer can create multiple collated copies where all copies after the original are printed at engine speed. \\ " ::= { status-system 42 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.9 device-used-while-cartridge-out-override-active OBJECT-TYPE SYNTAX INTEGER { eNotUsed(1), eUsed(2) } ACCESS read-only STATUS optional DESCRIPTION " Returns eUsed if the device has ever been used while Cartridge Out Override is activated. Merely enabling cartridge out override will not cause eUsed to be returned. Cartridge Out Override must be activated by a cartridge becoming out and device must be used in that mode" ::= { consumables 9 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.37 cartridge-adaptive-gain-reset OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS write-only STATUS optional DESCRIPTION " This object will Reset the Adaptive TA Gain value to 1 0 and disable the adaptive TA routine. The value that this object returns is stored in non-volatile memory" ::= { settings-prt-eng 37 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.2 supplies-at-very-low-delay OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-write STATUS optional DESCRIPTION " Indicates if the transition to a VERY LOW state should be delayed by the number of pages specified in SUPPLIES-AT-VERY-LOW-DELAY-LIMIT" ::= { consumables-status 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.38. supplies-at-very-low-setting OBJECT-TYPE SYNTAX INTEGER { eStopAtOut(2), eOverrideAtOut(4), ePromptAtOut(6), ePrintBlack(7) } ACCESS read-write STATUS optional DESCRIPTION " This object can be used to change the setting of menu item AT VERY LOW. The behavior of the printer when a supply reaches low changes in accordance with the setting of this PML Object. If the option eStopAtOut is selected then printer will stop when a supply reaches Estimated End of Life (EEOL). If the option eOverrideAtOut is selected then printer will continue past EEOL in override mode. If the option eOverrideAtOut is selected then printer will continue past EEOL in override mode. If the option ePromptAtOut is selected then printer will ask the user if they wish to continue printing past EEOL in override mode. If the option eAutoContinueBlack is selected then printer will continue printing in mono past EEOL. This may be subject to page limits. (Color only) NOTE: This object replaces SUPPLIES-REPLACE-ACTION-AT-SETTING" ::= { settings-prt-eng 38 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.3. consumable-life-low-threshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " This object is used to report and modify a threshold value indicating the point in the life of a consumable or supply at which a transition to a LOW state will occur" ::= { consumables-life 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.6. supplies-at-very-low-delay-limit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " This object is used to report and modify a very low delay limit value indicating the number of pages to delay the transition to a very low state for a supply." ::= { consumables-life 6 } web-server-password OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS optional DESCRIPTION "A user-defined password that the Embedded Web Server and Web JetAdmin will use to set the password for configuring the Embedded Web Server on a printer. The device POS will specify any limitation on the size of the password." ::= { settings-webserver 1 } web-server-url OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS optional DESCRIPTION "A Universal Resource Locator (URL) from which the Embedded Web Server can be configured. Any limitation on the size of this URL will be specified in the device POS." ::= { settings-webserver 2 } web-server-security OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Each collection bit represents a device or Embedded Web Server feature that can be enabled or disabled via this object." ::= { settings-webserver 3 } firmware-download-write-status-supported OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS read-only STATUS optional DESCRIPTION "This object provides information on whether the printer has the ability to communicate the write-status of the firmware download while the download is taking place." ::= { firmware-download 1 } firmware-download-write-time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "If the design of the firmware-download implementation does not allow PML interaction during the download process, this value provides an estimation of the time where the printer will not be able to engage in PML communication. Additional information: If the design of the firmware-download implementation does not allow PML interaction during the download process, this value provides an estimation of the time where the printer will not be able to engage in PML communication. The calculated time is expected to be 140 secs. However, this time may increase as high as 280 secs as the flash part nears the maximum flash count." ::= { firmware-download 2 } firmware-download-write-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Tells the number of times that firmware has been downloaded to the flash part. Additional information: Tells the number of times that firmware has been downloaded to the flash part. The default value will vary depending on how many times the firmware is rolled before shipping." ::= { firmware-download 3 } firmware-download-current-state OBJECT-TYPE SYNTAX INTEGER { eIdle(1), eReceivingImage(2), eReceivedImageError(3), eVerifyingImage(4), eVerifiedImageError(5), eWritingImage(6), eWritingImageError(7), eDownloadComplete(8), eOKtoShutDown(9), eCancelDownload(10), eShuttingDown(11) } ACCESS read-write STATUS optional DESCRIPTION "Provides the current or last reportable state of the firmware download process. The current state may not necessarily be the current state, but could be the post-mortem state." ::= { firmware-download 4 } firmware-download-maximum-write-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Reports the manufacturer specified number of times that firmware can be downloaded to the flash part. A value of -1 means that there is no limit. A value of 0 means that downloading firmware is not permitted by this part. Any other positive integer value corresponds to the number of times that firmware can be downloaded to the flash part. Additional information: Reports the manufacturer specified number of times that firmware can be downloaded to the flash part. A value of -1 means that there is no limit. A value of 0 means that downloading firmware is not permitted by this part. Any other positive integer value corresponds to the number of times that firmware can be downloaded to the flash part. The current maximum write count is 500. This may change as flash technology evolves." ::= { firmware-download 5 } firmware-download-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This returns the name of the printer. This should match the name in the header of the upgrade image being sent to the flash part. If the name does not match with the name returned then the image that we are attempting to download does not upgrade the printer firmware. Additional information: This object returns the HP name of the printer. This should match what is in the PJL header of the RFU job Web Jet Admin uses this to ensure the printer is available to be upgraded." ::= { firmware-download 6 } firmware-download-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This returns the name of the printer. This should match the name in the header of the upgrade image being sent to the flash part. If the name does not match with the name returned then the image that we are attempting to download does not upgrade the printer firmware. Additional information: This object returns the HP name of the printer. This should match what is in the PJL header of the RFU job Web Jet Admin uses this to ensure the printer is available to be upgraded." ::= { firmware-download 6 } firmware-download-version OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object will return a string value representing the current revision of firmware that the printer is operating with. This is used to determine if code needs to be upgraded when an firmware bundle comes in, in an upgrade job. Additional information: Web Jet Admin uses the version string that is returned to determine what peices of an RFU bundle need to be upgraded when an RFU job is being built. This objects will return the version string of the printer." ::= { firmware-download 7 } upgradable-devices-write-status-supported OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS read-only STATUS optional DESCRIPTION "This object provides information on whether the upgradable device has the ability to communicate the write-status of the upgrade while the upgrade is taking place." ::= { upgradable-devices 1 } upgradable-devices-write-time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "If the design of the device upgrade implementation does not allow PML interaction during the download process, this value provides an estimation of the time where the device will not be able to engage in PML communication. The time returned will depend upon what device is attempting to be upgraded." ::= { upgradable-devices 2 } upgradable-devices-write-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Tells the number of times that firmware for device X has been downloaded to the flash part. The default value will vary depending on how many times the firmware is rolled before shipping." ::= { upgradable-devices 3 } upgradable-devices-current-state OBJECT-TYPE SYNTAX INTEGER { eIdle(1), eReceivedImage(2), eReceivedImageError(3), eVerifiedImage(4), eVerifiedImageError(5), eWritingImage(6), eWritingImageError(7), eUpgradeComplete(8) } ACCESS read-only STATUS optional DESCRIPTION "Provides the current or last reportable state of the device upgrade process. The current state may not necessarily be the current state, but could be the post-mortem state." ::= { upgradable-devices 4 } upgradable-devices-max-write-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Reports the manufacturer specified number of times that firmware for device X can be downloaded to the flash part. A value of -1 means that there is no limit. A value of 0 means that downloading firmware is not permitted by this part. Any other positive integer value corresponds to the number of times that the firmware for device X can be downloaded to the flash part. The current maximum write count is 500. This may change as flash technology evolves." ::= { upgradable-devices 5 } upgradable-devices-name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This returns the name of the upgradable device. This should match the name in the header of the upgrade image being sent to the flash part. If the name does not match with any of the names returned then the device that we are attempting to upgrade is unavailable for upgrading. Additional information: This object returns the HP name of the printer and the upgradable devices. There is one Name object per upgradable device. This should match what is in the PJL header of the RFU job Web Jet Admin uses this to ensure the printer or device is available to be upgraded." ::= { upgradable-devices 6 } upgradable-devices-version OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object will return a string value representing the current revision of firmware that device X is operating with. This is used to determine if code needs to be upgraded when a firmware bundle comes in, in an upgrade job. Additional information: Web Jet Admin uses the version string that is returned to determine what peices of an RFU bundle need to be upgraded when an RFU job is being built. This internal object will return the current version string of the printer or device that it corresponds to." ::= { upgradable-devices 7 } remote-upgrade-enable OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or disables the ability to upgrade the firmware associated with any device that is available to be upgraded. This will be set to on or off at the RFU level in that if this mode is on any available device can be upgraded and if this mode is off none of the devices can be upgraded. There is not an individual mode for each device. Trying to set this to a value other than eOn or eOff will cause an UnsupportedValue error to occur." ::= { upgradable-devices 8 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.36 cartridge-adaptive-gain OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The Adaptive TA Gain is stored for the last 5 cartridges. Cartridge one is the most recent to be installed (current), and cartridge 5 is least recent to be installed. This object is double array object. OID extension is CARTRIDGE-ADAPTIVE-GAIN.x.n, where x is 1..4 (x is Black, Cyan, Magenta, Yellow Toner), and n is 1..5 (n is number of cartridges) " ::= { settings-prt-eng 36 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1-40 consumable-status-cartridge-model OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS optional DESCRIPTION "This object is used to read the cartridge model number associated with this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 1 } consumable-status-manufacturing-date OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the date on which this consumable was manufactured. The format of the string is 'YYYYMMDD', where YYYY is the year, MM is the month (1-12), and DD is the day (1-31). Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 2 } consumable-status-serial-number OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the serial number for this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 3 } consumable-status-capacity-units OBJECT-TYPE SYNTAX INTEGER { ePagesAt5PercentCoverage(1), e1KPagesAt5PercentCoverage(2), e10KPagesAt5PercentCoverage(3) } ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the usage units used by the CONSUMABLE-STATUS-TOTAL-CAPACITY object. Additional information: This object will only exist on engines that are E-Label capable, but will exist on these engines regardless of the cartridge being Authentic HP or NonHP. This object can be used to ensure the capability of the E-Label feature for a given engine." ::= { consumable-status 4 } consumable-status-total-capacity OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the total capacity of a new consumable of this type. The PML object CONSUMABLE-STATUS-CAPACITY-UNITS can be used to determine the units of measure for this PML object. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 5 } consumable-status-reseller-id OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS optional DESCRIPTION "This object is used to query and set the reseller ID for this consumable. This ID is represented as an integer that is essentially an enumeration representing a specific reseller that sells this consumable. The device POS should detail the mapping of reseller name to reseller ID. In this way the reseller can program into the consumable a suggested reseller which can in turn be mapped to a web page through which a replacement can be purchased. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist. The reseller ID is an integer that must be mapped external to the printer by a host application. The value stored must be specific to an external application." ::= { consumable-status 6 } consumable-status-info OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "This object is used to read and write the various status flags supported by this consumable. For LaserJet 4100, LaserJet 4550 the collection bits supported include: cMarkedAsReordered - indicates the consumable has been reordered. This is the only bit that can be both read and written. cTonerLowCondition - indicates a toner low condition has occured. This bit in the collection is read-only to PML. cTonerOutCondition - indicates a toner out condition has occured. This bit in the collection is read-only to PML. cDeveloperLowCondition - indicates a developer low condition has occured. This bit in the collection is read-only to PML. cDeveloperOutCondition - indicates a developer out condition has occured. This bit in the collection is read-only to PML. cDrumLowCondition - indicates a drum low condition has occured. This bit in the collection is read-only to PML. cDrumOutCondition - indicates a drum out condition has occured. This bit in the collection is read-only to PML. cWasteTonerFullCondition - indicates a waste toner full condition has occured. This bit in the collection is read-only to PML. cWasteTonerFullWarningCondition - indicates a waste toner full warning condition has occured. This bit in the collection is read-only to PML. cNewConsumable - indicates the consumable is new and has never been used. This bit in the collection is read-only to PML. cTonerLowNotificationSent - inidicates that toner low notification has been sent for this consumable. This bit in the collection is readonly. cTonerOutNotificationSent - inidicates that toner out notification has been sent for this consumable. This bit in the collection is read only. cAnyPartLowCondition - indicates that at least one part of this consumable has reached a low condition. This bit in the collection is read-only to PML. cAnyPartOutCondition - indicates that at least one part of this consumable has reached an out condition. This bit in the collection is read-only to PML. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 7 } consumable-status-first-install-date OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the date on which this consumable was first installed. The format of the string is 'YYYYMMDD'. Where: YYYY is the year. MM is the month (1-12). DD is the day (1-31). The device POS needs to indicate what will be written in the event the printer does not have a real time clock. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist. For printers without internal clocks, the date will always be 20000101." ::= { consumable-status 8 } consumable-status-last-use-date OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the date on which this consumable was last used. The format of the string is 'YYYYMMDD'. Where: YYYY is the year. MM is the month (1-12). DD is the day (1-31). The device POS needs to indicate what will be written in the event the printer does not have a real time clock. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist. For printers without internal clocks, the date will always be 20000101." ::= { consumable-status 9 } consumable-status-page-count-a3-ledger OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable that are of the specified media size - A3 or Ledger. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 10 } consumable-status-page-count-legal OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable that are of the specified media size - Legal. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 11 } consumable-status-page-count-a4-letter OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable that are of the specified media size - A4 or Letter. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 12 } consumable-status-page-count-b5-executive OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable that are of the specified media size - B5 or Executive. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 13 } consumable-status-page-count-envelope OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable that are of the specified media size - Envelope. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 14 } consumable-status-page-count-xy-other OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable that are of the specified media size - XY or Other. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 15 } consumable-status-job-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of jobs that have been printed by this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 16 } consumable-status-usage-units OBJECT-TYPE SYNTAX INTEGER { ePixels(1), eTenthsOfGrams(2), eGrams(3), eRotations(4), ePages(5), eImpressions(6), ePercentLifeRemaining(7), eOther(8) } ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the units used to measure the capacity of this consumable. Additional information: This object will only exist on engines that are E-Label capable, but will exist on these engines regardless of the cartridge being Authentic HP or NonHP. This object can be used to ensure the capability of the E-Label feature for a given engine." ::= { consumable-status 17 } consumable-status-usage-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of usage units that remain in this consumable. The units of measurement used by this object can be obtained by querying the CONSUMABLE-STATUS-USAGE-UNITS object. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 18 } consumable-status-manufacturer-name OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the name of the manufacturer of this consumable. The device POS will specify the set of manufacturers that could be returned. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 19 } consumable-status-oem-name OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the name of the OEM of this consumable. This object will typically return the string 'HP'. The device POS will specify if other OEM consumables are supported. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist. This object should always return 'HP' as the OEM name" ::= { consumable-status 20 } consumable-status-engine-usage-units OBJECT-TYPE SYNTAX INTEGER { ePixels(1), eTenthsOfGrams(2), eGrams(3), eRotations(4), ePages(5), eImpressions(6), ePercentLifeRemaining(7), eOther(8) } ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the units used to measure the capacity of this consumable as reported by the Engine. Additional information: This object will only exist on engines that are E-Label capable, but will exist on these engines regardless of the cartridge being Authentic HP or NonHP. This object can be used to ensure the capability of the E-Label feature for a given engine." ::= { consumable-status 21 } consumable-status-engine-usage-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of usage units, estimated by the engine, that remain in this consumable. The units of measurement used by this object can be obtained by querying the CONSUMABLE-STATUS-ENGINE-USAGE-UNITS object. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 22 } consumable-status-engine-job-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of jobs, as reported by the printer, that have been printed by this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 23 } consumable-status-total-page-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the total number of pages that have been printed by this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 24 } consumable-status-mono-page-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of monochrome pages that have been printed by this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 25 } consumable-status-color-page-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of color pages that have been printed by this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 26 } consumable-status-total-equiv-page-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the total number of equivelent Letter/A4 pages that have been printed by this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 27 } consumable-status-total-equiv-mono-page-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the total number of monochrome equivelent Letter/A4 pages that have been printed by this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 28 } consumable-status-total-equiv-color-page-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the total number of color equivelent Letter/A4 pages that have been printed by this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 29 } consumable-status-input-option-sheet-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable that had the input option as their source. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 30 } consumable-status-duplex-sheet-count OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable that were also duplexed (printed both sides). Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 31 } consumable-status-page-count-half-speed OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable at one half engine speed. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 32 } consumable-status-page-count-quarter-speed OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable at one quarter engine speed. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 33 } consumable-status-page-count-third-speed OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of pages that have been printed by this consumable at one third engine speed. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 34 } consumable-status-page-count-postcard OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of postcard sized pages that have been printed by this consumable. Additional information: This object will only exist for Authentic HP consumables. If the cartridge is deemed to be NonHP, then this object will not exist." ::= { consumable-status 35 } consumable-status-developer-life-units OBJECT-TYPE SYNTAX INTEGER { ePixels(1), eTenthsOfGrams(2), eGrams(3), eRotations(4), ePages(5), eImpressions(6), ePercentLifeRemaining(7), eOther(8) } ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the units used to measure the developer life remaining. Additional information: This object will only exist on engines that are E-Label capable, but will exist on these engines regardless of the cartridge being Authentic HP or NonHP. This object can be used to ensure the capability of the E-Label feature for a given engine." ::= { consumable-status 36 } consumable-status-developer-life OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of life units, remaining in the developer. The units of measurement used by this object can be obtained by querying the CONSUMABLE-STATUS-DEVELOPER-LIFE-UNITS object. This object will not exist if this consumable does not contain a developer. Additional information: This object will only exist on engines that are E-Label capable, but will exist on these engines regardless of the cartridge being Authentic HP or NonHP. This object can be used to ensure the capability of the E-Label feature for a given engine." ::= { consumable-status 37 } consumable-status-drum-life-units OBJECT-TYPE SYNTAX INTEGER { ePixels(1), eTenthsOfGrams(2), eGrams(3), eRotations(4), ePages(5), eImpressions(6), ePercentLifeRemaining(7), eOther(8) } ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the units used to measure the drum life remaining. Additional information: This object will only exist on engines that are E-Label capable, but will exist on these engines regardless of the cartridge being Authentic HP or NonHP. This object can be used to ensure the capability of the E-Label feature for a given engine." ::= { consumable-status 38 } consumable-status-drum-life OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of life units, remaining in the drum. The units of measurement used by this object can be obtained by querying the CONSUMABLE- STATUS-DRUM-LIFE-UNITS object. This object will not exist if this consumable does not contain a drum. Additional information: This object will only exist on engines that are E-Label capable, but will exist on these engines regardless of the cartridge being Authentic HP or NonHP. This object can be used to ensure the capability of the E-Label feature for a given engine." ::= { consumable-status 39 } consumable-status-authentication OBJECT-TYPE SYNTAX INTEGER { eAuthLevel1(1), eAuthLevel2(2), eAuthLevel3(3) } ACCESS read-only STATUS optional DESCRIPTION "This object returns the authentication level of the elabel on the given supply. The elabel authentication is returned via the appropriate enum. Additional information: There are three levels of authentication of an ELabel cartridge supported. Each ELabel cartridges level of authentication is provided here, via this enumeration." ::= { consumable-status 40 } consumable-status-formatter-color-page-count OBJECT-TYPE SYNTAX INTEGER(0..32768) ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the number of color pages that have been printed by this consumable. Additional information: This object is used to report the number of color pages that have been printed by a consumable." ::= { consumable-status 46 } consumable-status-partnumber OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object will have one sub-array for the consumable and w ill will hold the consumable's part number. Additional information: This object will have one sub-array for the consumable and will will hold the consumable's part number." ::= { consumable-status 56 } consumable-status-page-count-out-while-cartridge-out-override-active OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS optional DESCRIPTION "This PML object is used to report the number of pages that have been printed while this consumable was out and Cartridge Out Override was active. Additional information: This object is used to report the number of pages that have been printed while this consumable was out and cartridge out override was active. Note that the object has write access in debug mode." ::= { consumable-status 60 } consumable-status-web-service-access-data OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object is used to report Web Service Access Data. Additional information: This object is used to report Web Service Access Data." ::= { consumable-status 75 } consumable-status-web-service-access-control OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object is used to report data that controls how web service access is enabled. Additional information: This object is used to report data that controls how web service access is enabled." ::= { consumable-status 76 } consumable-drum-life-level OBJECT-TYPE SYNTAX INTEGER { eDrumLifeLevel1(1), eDrumLifeLevel2(2), eDrumLifeLevel3(3), eDrumLifeLevel4(4) } ACCESS read-only STATUS optional DESCRIPTION "This object is used to get the Drum Life Level of the Drum. This object is for testing purposes only and is controlled by the <> object. Additional information: This object returns the drum life level depending on the life ph ases that are defined for the TECM feature. The Drum Life phase are define d are follows: eDrumLifeLevel1 : 0 to 24% eDrumLifeLevel2 : 25 to 57% eDrumLifeLevel3 : 58 to 91% eDrumLifeLevel4 : 92 to 100% This object is always supported and will return the DRUM LIFE LE VEL set depending on the percentage value of drum life remaining." ::= { consumable-status 77 } consumable-status-expiration-date OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the ink cartridge expiration date in yyyymmdd format. An unknown date is represented by the date 00000000. Additional information: Indicates the ink cartridge expiration date in yyyymmdd format. An unknown date is represented by the date 00000000" ::= { consumable-status 79 } consumable-status-tls-max-value OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object returns the toner level sensor (TLS) max value for the consumable. Additional information: This object returns the TLS max value for the consumable." ::= { consumable-status 96 } consumable-status-printer-design-compatibility OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object will returns the value of printer design compatibility for the consumable. Additional information: This object will returns the value of printer design compatibility for the consumable." ::= { consumable-status 97 } consumable-status-toner-low-sensing-level OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object will return the value of toner low sensing level for the consumable. Additional information: This object returns the toner low sensing level for the consumable." ::= { consumable-status 99 } consumable-status-manufacturing-signature OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object reurns the digital signature written to the consumable during manufacturing. The interpretation of the signature is determined by the printer model,cartridge model and cartridge manufacturing date.The actual interpretation is performed by the online cartridge verification service. The data is encoded most significant octet first. A manufacturing signature consisting of a single byte indicates the error: 0x01 : The digital signature is not currently available, but should be available at some point in the future.The client should try again in future. 0x02 : The digital signature was not able to be retrieved from the cartridge because an error occured during retrieval. 0x03 : The digital signature is not supported by the currently installed cartridge. The format of the binary payload is dependent on the printer model, cartridge model and cartridge manufacturing date.Clients consuming this information must know the format for the printer in question." ::= { consumable-status 104 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.15. total-kilo-pixels-per-cartridge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Returns the total number of kilo-pixels at 600dpi in the cartridge. That is, the number returned by this object should be multiplied by 1000 to determine the total number of pixels at 600dpi in the cartridge " ::= { consumables 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.1. consumable-life-usage-units-remaining OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " This object reports the current estimate of the number of usage units that remain before this supply is depleted. An installed supply that cannot report such a number will return a value of -2. It is the reponsibility of the host application to query each supply in order to determine an overall device USAGE-UNITS-REMAINING number - the lowest value returned. The unit of measure for this life estimate is determined by reading the corresponding CONSUMABLE-LIFE-USAGE-UNITS object" ::= { consumables-life 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.2. consumable-life-usage-units OBJECT-TYPE SYNTAX INTEGER { ePagesRemaining(1), eEstimatedPagesRemaining(2), eUnknownUnits(3), ePagesSinceLow(4), ePagesSinceOut(5), ePagesPicked(6), ePercentLifeRemaining(7), e4X6ImagesPrinted(8), eEngineDropCount(9), eEngineWebAdvances(10) } ACCESS read-only STATUS optional DESCRIPTION " This object reports current usage units in use by the corresponding CONSUMABLE-LIFE-USAGE-UNITS-REMAINING object" ::= { consumables-life 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.4. estimated-page-yield OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Returns the estimated yield of the cartridge in ESTIMATED-PAGE-YIELD-UNIT units" ::= { consumables-life 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.5. estimated-page-yield-unit OBJECT-TYPE SYNTAX INTEGER { e5PercentPages(1), eISOPages(2) } ACCESS read-only STATUS optional DESCRIPTION " Returns the unit used for ESTIMATED-PAGE-YIELD" ::= { consumables-life 5 } consumable-reorder-url OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) ACCESS read-write STATUS optional DESCRIPTION "This object is used to read and write the URL that can be used to reorder consumables for this device. This URL is set at the factory but can be updated by a reseller or third party. Additional information: The URL can be up to 64 characters long." ::= { consumables 2 } consumable-maintenance-interval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object reports the total number of pages that can be printed before the maintenance kit needs to be replaced." ::= { consumables 3 } consumable-maintenance-pages-remaining OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object reports the number of pages remaining until the Maintenance Interval is reached." ::= { consumables 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.7. consumable-current-state OBJECT-TYPE SYNTAX INTEGER { cAuthLevel1(0), cAuthLevel2(1), cAuthLevel3(2), cAuthLevel4(3), cAuthLevel5(4), cAuthLevel6(5), cAuthLevel7(6), cGenuineHPUnsupported(8), cELabelDefective(9), cELabelMissing(10), cLowCondition(11), cOutCondition(12), cIncorrect(13), cMissing(14), cPastOutCondition(15), cConfigurableLow(16), cExpired(17), cFailure(18), cLeak(19), cUnknownManufacturer(20), cUnsupported(21), cUnavailable(22), cIncompatible(23), cStatusAreValid(31) } ACCESS read-only STATUS optional DESCRIPTION " This PML object returns the current state of the particular consumable. \\ cAuthLevel1 - Consumable is at Authentication Level 1 \\ cAuthLevel2 - Consumable is at Authentication Level 2 \\ cAuthLevel3 - Consumable is at Authentication Level 3 \\ cAuthLevel4 - Consumable is at Authentication Level 4 \\ cAuthLevel5 - Consumable is at Authentication Level 5 \\ cGenuineHPUnsupported - Cartridge is GenuineHP intended for another product \\ cDefectiveMemory - Cartridge has a defective memory tag \\ cMissingMemory - Memory tag is missing from the cartridge\\ cLowCondition - Consumable has reached the engine low threshold \\ cOutCondition - Consumable has reached its out threshold \\ cIncorrect - Cartridge inserted is not the correct one \\ cMissing - Consumable is missing from the printer \\ cConfigurableLow - Consumable has reached the configurable low threshold value \\ cStatusArevalid - The status reported on other bits are valid only if the bit is set to 1. If it is 0, the values are invalid. \\ cExpired - Is the cartridge expired, which is determined \\ by the formatter.\\ cFailure - Cartridge has failed determined by the engine. \\ cLeak - Cartridge has a leak as determined by the engine. \\ cUnknownManufacturer - the brand of the cartridge is \\ unknown as determined by the engine. \\ cUnsupported --- Cartridge is not supported as determined\\ by the engine. \\ cIncompatible - When installed consumable is incompatible with current printer. These are the possible states and whenever the consumable is in any of these states, the appropriate bit will be set. The cLowCondition will be set when the consumable reaches the engine low threshold, and cConfigurableLow will be set when the consumable reaches the Configurable Low threshold value. For non-cartridge supplies only cLowCondition, cOutCondition, and cMissing will be supported " ::= { consumables 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.11. consumable-pages-printed-with-supply OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " This PML object returns the number of pages printed with a cartridge consumable. This PML object returns the value that should be displayed under 'Pages Printed With This Supply' for cartridges in color products" ::= { consumables 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.8.2 fih-extra-pulses-feature OBJECT-TYPE SYNTAX INTEGER { eDisable(1), eEnable(2) } ACCESS read-write STATUS optional DESCRIPTION " This object allows one to get/set the setting of the FIH EXTRA PULSES FEATURE item. This either turns the feature on or off based on customer requirement" ::= { foreign-interface 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.6 total-mono-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of black pages printed by the device" ::= { status-prt-eng 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.7 total-color-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of color pages printed by the device" ::= { status-prt-eng 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22 duplex-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not marks are made on the page. The POS will indicate if the value is kept in NVRAM" ::= { status-prt-eng 22 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.10 source-tray-usage-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " This object reports the total source tray usage for the life of the printer. This value is reported on the usage page" ::= { printer-accounting 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.11 destination-bin-usage-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " This object reports the total destination bin usage for the life of the printer. This value is reported on the usage page" ::= { printer-accounting 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.9 printed-modes-usage-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " This object reports the total color and mono print modes usage for the life of the printer. This value is reported on the usage page" ::= { printer-accounting 9 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.12 usage-printer-mono-total-charge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total printer charge for all paper sizes printed in monochrome only " ::= { printer-accounting 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.13 usage-printer-color-total-charge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total printer charge for all paper sizes printed in color only " ::= { printer-accounting 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.2 usage-printer-total-charge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total printer charge for all paper sizes printed" ::= { printer-accounting 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.15 usage-printer-mono-simplex-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " This object reports the total of monochrome simplex pages printed on this device. This value is the sum of all PRINTED-MEDIA-SIMPLEX-COUNT.n counter values" ::= { printer-accounting 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.16 usage-printer-mono-duplex-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " This object reports the total of monochrome duplex pages printed on this device. This value is the sum of all PRINTED-MEDIA-DUPLEX-COUNT.n counter values" ::= { printer-accounting 16 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.17 usage-printer-mono-dimplex-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " This object reports the total of monochrome dimplex pages printed on this device. This value is the sum of all PRINTED-MEDIA-DIMPLEX-COUNT.n counter values" ::= { printer-accounting 17 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.13 printed-media-combined-simplex-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of simplex pages printed on this device" ::= { printed-media-usage 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.14 printed-media-combined-duplex-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of duplex pages printed on this device" ::= { printed-media-usage 14 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5 pcl-total-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of PCL pages printed by the device" ::= { pdl-pcl 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5 postscript-total-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of PostScript pages printed by the device" ::= { pdl-postscript 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5.1 pjl-password OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns PJL password, if the password is not set (zero). If the password is set, then attempting to retrieve the password causes an to occur and will return the ." ::= { pjl 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.2 pdf-total-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of PDF pages printed by the device" ::= { pdl-pdf 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.15 impression-based-duplex-count-supported OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS read-only STATUS optional DESCRIPTION " The object is used to get the information on new duplex counting mechanism. With this new mechanism the Duplex count would represent actual Duplex count and not half of the count. eTrue means feature is available for the user" ::= { printed-media-usage 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5.1.1. source-tray-usage-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of pages printed from this source tray" ::= { source-tray-usage 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6.1.1. destination-bin-usage-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of pages printed to this destination bin" ::= { destination-bin-usage 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4.1.1. printed-modes-mono-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of mono pages printed in this fuser mode" ::= { printed-modes-usage 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4.1.3. printed-modes-color-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of color pages printed in this fuser mode" ::= { printed-modes-usage 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4.1.5. printed-modes-total-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The total count for pages printed in this fuser mode" ::= { printed-modes-usage 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.1. printed-media-simplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of simplex pages printed in this media size" ::= { printed-media-usage 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.3. printed-media-duplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of duplex pages printed in this media size" ::= { printed-media-usage 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.10. printed-media-dimplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of mono dimplex pages printed in this media size. A dimplex page is one that has been printed in duplex mode but the back side is blank. Dimplex pages occur when the printer firmware inserts a blank page in order to complete a duplexed job which is sent to the printer with an odd number of pages" ::= { printed-media-usage 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.1. printed-media-color-simplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of color simplex pages printed in this media size" ::= { printed-media-color-usage 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.3. printed-media-color-duplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of color duplex pages printed in this media size" ::= { printed-media-color-usage 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.6. printed-media-color-dimplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of color dimplex pages printed in this media size. A color dimplex page is a color page that has been printed in duplex mode but the back side is blank. Dimplex pages occur when the printer firmware inserts a blank page in order to complete a duplexed job which is sent to the printer with an odd number of pages" ::= { printed-media-color-usage 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.2. printed-media-simplex-charge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Charge for each simplex page printed in this media size" ::= { printed-media-usage 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.4. printed-media-duplex-charge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Charge for each duplex page printed in this media size" ::= { printed-media-usage 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.5. printed-media-color-total-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The total count for color pages printed in this media size" ::= { printed-media-color-usage 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.5. printed-media-total-charge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The total charge for pages printed in this media size" ::= { printed-media-usage 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.6 printed-media-maximum-pixels-per-page OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The number of pixels required to completely fill a page of this media size. The device POS will specify the resolution at which this pixel count was calculated. Additional information: The number of pixels required to fill a page of a specific media size. The OID binding is the media size you to query for. Only media sizes which the printer supports will be available." ::= { printed-media-usage 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.7. printed-media-combined-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Total number of letter equivalently weighted pages both color and mono combined with this printer" ::= { printed-media-usage 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.11. printed-media-combined-simplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of simplex pages printed on this media size" ::= { printed-media-usage 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.12. printed-media-combined-duplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of duplex pages printed on this media size" ::= { printed-media-usage 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.4 print-meter-simplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of simplex pages printed for this category of printed pages" ::= { print-meter-usage 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.5 print-meter-duplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of duplex pages printed for this category of printed pages" ::= { print-meter-usage 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.7 print-meter-dimplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of dimplex pages printed for this category of printed pages" ::= { print-meter-usage 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.6 print-meter-total-charge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of simplex plus duplex pages printed multiplied by the unit charge for each given media size for this category of printed pages" ::= { print-meter-usage 6 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.2. print-meter-usage-threshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " A value indicating the threshold value for this category of pages. The device POS will indicate the units of measure for this threshold value" ::= { print-meter-usage 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.3. print-meter-print-quality OBJECT-TYPE SYNTAX INTEGER { ePrintQualityMono(1), ePrintQualityGood(2), ePrintQualityBest(3) } ACCESS read-only STATUS optional DESCRIPTION " This enumeration describes the selected print quality for this category of printed pages " ::= { print-meter-usage 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.8. print-meter-simplex-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of simplex pages printed for this category of printed pages" ::= { print-meter-usage 8 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.9. print-meter-duplex-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of duplex pages printed for this category of printed pages" ::= { print-meter-usage 9 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.10. print-meter-category-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of simplex plus duplex pages printed for this category of printed pages" ::= { print-meter-usage 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.11. print-meter-dimplex-total OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Total number of dimplex pages printed for this category of printed pages" ::= { print-meter-usage 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.63 scanner-accessory-total-copy-pages-printed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " This relates to the number of copy pages printed on a device. The output sheet that is duplexed (made 2- sided) should be counted as 2 pages" ::= { settings-scanner 63 } mopy-mode OBJECT-TYPE SYNTAX INTEGER { eOff(1), eStandard(4), eEnhanced(5) } ACCESS read-write STATUS optional DESCRIPTION "Controls or reports how mopies are generated. eOff turns off the mopy feature. eAuto allows the device to determine the best method for generating mopies based on the device configuration. eStandard spools the I/O data and replays the I/O data multiple times to generate the mopies. eEnhanced spools the rasterized page images and replays the rasterized data to generate the mopies. Typically, the rasterized data will be larger and will allow all but the first mopy to print at speed. If the job being mopied is not extremely complex, then the first mopy will print at speed also." ::= { settings-spooler 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.44 print-meter-equivalent-impression-count OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object reports the number of A4 equivalent impressions by color category and data source for all pages printed on this device. All printed impressions are normalized to a Letter/A4 sheet of media by dividing the area of the sheet by that of a Letter/A4 sheet of media. This is a doubly indexed array object where the first OID binding is the impression category and the second OID binding is the data source for the printed impression. The possible categories are: \\ 1 = Monochrome\\ 2 = Color\\ 3 = Composite Black\\ 4 = General Office Accent\\ 5 = General Office Color\\ 6 = Professional Accent\\ 7 = Professional Color\\ 8 = Presentation Accent\\ 9 = Presentation Color\\ 10 = MAX DPI Accent\\ 11 = MAX DPI Color\\ 12 = Blank\\ 13 = Total\\ 14 = Accent Color\\ 15 = Full Color\\ The possible media sizes are defined in the PCL Implementer’s Guide and in the Media Size Table near the end of this MIB.\\ The possible Data Sources are: \\ 1 = Print (I/O Port or Internal Pages)\\ 2 = Copy (Scanner)\\ 3 = FAX (Modem)\\ The format for the OID is as follows: 1.1.16.1.44.m.p <---------> | | | | \ | | Data Source / \ / \ Base OID Impression Category The device POS will indicate which impression categories and which data sources are supported/implemented for a given product. General office, Professional,Presentation & MaxDPI Impression categories are applicable only on OJMFPX585,OJX555 and future page wide array but not on LaserJet products. Refer to the FSMIBREADME.txt for instructions to convert to decimal equivalent. Impression count value has to be interpreted as IEEE745 floating point single precision." ::= { printer-accounting 44 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.20 print-meter-impression-count OBJECT-TYPE SYNTAX integer ACCESS read-only STATUS optional DESCRIPTION "This object reports the number of impressions by category and media size for printed pages received over the I/O ports for this device. This is a doubly indexed array object where the first OID binding is the impression category and the second OID binding is the media size. The possible impression categories are: \\ 1 = Monochrome\\ 2 = Color\\ 3 = Composite Black\\ 4 = General Office Accent\\ 5 = General Office Color\\ 6 = Professional Accent\\ 7 = Professional Color\\ 8 = Presentation Accent\\ 9 = Presentation Color\\ 10 = Max DPI Accent\\ 11 = Max DPI Color\\ 12 = Blank\\ 13 = Total\\ 14 = Accent Color\\ 15 = Full Color\\ The possible media sizes are defined in the PCL Implementer’s Guide and in the Media Size Table near the end of this MIB.\\ The format for the OID is as follows: 1.1.16.1.20.m.n <---------> | | | | \ | | Media Size / \ / \ Base OID Impression Category The device POS will indicate which impression categories and which media sizes are supported/implemented on a given product.This object will be enabled via feature authorization and will only be available to authorized customers." -- STATUS proposed ::= { printer-accounting 20 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.26 print-meter-impression-copy-count OBJECT-TYPE SYNTAX integer ACCESS read-only STATUS optional DESCRIPTION "This object reports the number of impressions by category and media size for printed pages received from the scanner on this device. This is a doubly indexed array object where the first OID binding is the impression category and the second OID binding is the media size. The possible categories are: \\ 1 = Monochrome\\ 2 = Color\\ 3 = Composite Black\\ 4 = General Office Accent\\ 5 = General Office Color\\ 6 = Professional Accent\\ 7 = Professional Color\\ 8 = Presentation Color\\ 9 = Presentation Accent\\ 10 = Max DPI Accent\\ 11 = Max DPI Color\\ 12 = Blank\\ 13 = Total\\ 14 = Accent Color\\ 15 = Full Color\\ The possible media sizes are defined in the PCL Implementer’s Guide and in the Media Size Table near the end of this MIB.\\ The format for the OID is as follows: 1.1.16.1.26.m.n <---------> | | | | \ | | Media Size / \ / \ Base OID Impression Category The device POS will indicate which impression categories and which media sizes are supported/implemented on a given product.This object will be enabled via feature authorization and will only be available to authorized customers." -- STATUS proposed ::= { printer-accounting 26 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.32 print-meter-impression-fax-count OBJECT-TYPE SYNTAX integer ACCESS read-only STATUS optional DESCRIPTION "This object reports the number of impressions by category and media size for printed pages received from the FAX modem on this device. This is a doubly indexed array object where the first OID binding is the impression category and the second OID binding is the media size. The possible categories are: \\ 1 = Monochrome\\ 2 = Color\\ 3 = Composite Black\\ 4 = General Office Accent\\ 5 = General Office Color\\ 6 = Professional Accent\\ 7 = Professional Color\\ 8 = Presentation Accent\\ 9 = Presentation Color\\ 10 = Max DPI Accent\\ 11 = Max DPI Color\\ 12 = Blank\\ 13 = Total\\ 14 = Accent Color\\ 15 = Full Color\\ The possible media sizes are defined in the PCL Implementer’s Guide and in the Media Size Table near the end of this MIB.\\ The format for the OID is as follows: 1.1.16.1.32.m.n <---------> | | | | \ | | Media Size / \ / \ Base OID Impression Category The device POS will indicate which impression categories and which media sizes are supported/implemented for a given product.This object will be enabled via feature authorization and will only be available to authorized customers." -- STATUS proposed ::= { printer-accounting 32 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.38 print-meter-impression-count OBJECT-TYPE SYNTAX integer ACCESS read-only STATUS optional DESCRIPTION "This object reports the number of impressions by category and media size for printed pages received on this device independent of the data source. This object reports the sum of Print, Copy and FAX impressions and is a doubly indexed array object where the first OID binding is the impression category and the second OID binding is the media size. The possible impression categories are: \\ 1 = Monochrome\\ 2 = Color\\ 3 = Composite Black\\ 4 = General Office Accent\\ 5 = General Office Color\\ 6 = Professional Accent\\ 7 = Professional Color\\ 8 = Presentation Accent\\ 9 = Presentation Color\\ 10 = Max DPI Accent\\ 11 = Max DPI Color\\ 12 = Blank\\ 13 = Total\\ 14 = Accent Color\\ 15 = Full Color\\ The possible media sizes are defined in the PCL Implementer’s Guide and in the Media Size Table near the end of this MIB.\\ The format for the OID is as follows: 1.1.16.1.38.m.n <---------> | | | | \ | | Media Size / \ / \ Base OID Impression Category The device POS will indicate which impression categories and which media sizes are supported/implemented for a given product.This object will be enabled via feature authorization and will only be available to authorized customers." -- STATUS proposed ::= { printer-accounting 38 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.47 print-meter-equivalent-impression-category-total OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object reports the total equivalent number of impressions by category for all pages printed on this device. All printed impressions are normalized to a Letter/A4 sheet of media by dividing the area of the sheet by that of a Letter/A4 sheet of media. This is an array object where the OID binding is the page category for the printed impression. The possible categories are: \\ 1 = Monochrome\\ 2 = Color\\ 3 = Composite Black\\ 4 = General Office Accent\\ 5 = General Office Color\\ 6 = Professional Accent\\ 7 = Professional Color\\ 8 = Presentation Accent\\ 9 = Presentation Color\\ 10 = Max DPI Accent\\ 11 = Max DPI Color\\ 12 = Blank\\ 13 = Total\\ 14 = Accent Color\\ 15 = Full Color\\ The format for the OID is as follows: 1.1.16.1.47.m <---------> | | | | | / \ / \ Base OID Impression Category The device POS will indicate which categories are supported/implemented for a given product.This object will be enabled via feature authorization and will only be available to authorized customers." -- STATUS proposed ::= { printer-accounting 47 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.59 print-meter-equivalent-impression-coverage OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object reports the number of A4 equivalent impressions by marker color and by the percentage coverage for each color compared to the ISO Yield Page - for printed pages received over the I/O ports for this device. This is a doubly indexed array object where the first OID binding is the marker color and the second OID binding is the impression coverage area compared to the ISO Yield page. The possible marker colors are typically: 1 = Black 2 = Cyan 3 = Magenta 4 = Yellow The actual mapping for this OID binding can be discovered by walking the prtMarkerSuppliesDescription objects. The possible coverage categories along with their enumerations and descriptions are listed in 'Contractual Coverage Table' near the end of this document. The format for the OID is as follows: 1.1.16.1.59.m.n m represents the marker color n represents the coverage category Each of these SNMP objects/counters has a corresponding DUSI(Web Service) counter from Device-printer- A4EquivalentImpressionsByMarkerColor counter group.This object will be enabled via feature authorization and will only be available to authorized customers." -- STATUS proposed ::= { printer-accounting 59 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.60 print-meter-equivalent-impression-coverage-bytime OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object reports the number of A4 equivalent impressions by marker color and by the percentage coverage for each color compared to the ISO Yield Page - for printed pages received over the I/O ports for this device. This is a three dimensional array object where the first OID binding is the time period, the second OID binding is the marker color and the third OID binding is the impression coverage area compared to the ISO Yield page. The possible time period ID integer values consist of values greater than 0. The first time period (1.1.16.1.60.1.n.o) is always the current time period. The possible marker colors are typically: 1 = Black 2 = Cyan 3 = Magenta 4 = Yellow The actual mapping for this OID binding can be discovered by walking the prtMarkerSuppliesDescription objects. The possible coverage categories along with their enumerations and descriptions are listed in 'Contractual Coverage Table' near the end of this document. The format for the OID is as follows: 1.1.16.1.60.m.n.o m represents the time period n represents the marker color o represents the coverage category Each of these SNMP objects/counters has a corresponding DUSI(Web Service) counter from Device-printer-A4EquivalentImpressionsByTimePeriod- A4EquivalentImpressionsByMarkerColor counter group.This object will be enabled via feature authorization and will only be available to authorized customers" -- STATUS proposed ::= { printer-accounting 60 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.61 print-meter-equivalent-impression-coverage-bytime-interval OBJECT-TYPE SYNTAX integer ACCESS read-only STATUS optional DESCRIPTION "This object reports the number of days in each contractual coverage time period. For example if the number of days in each contractual coverage time period is 30 days - then this object will return a value of 30.This object will be enabled via feature authorization and will only be available to authorized customers" -- STATUS proposed ::= { printer-accounting 61 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 host-application-available-memory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driver work space (DWS) memory. " ::= { status-system 59 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.1 pdf-version OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " Contains version of PDF that is supported on the device" ::= { pdl-pdf 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.3 pdf-enabled OBJECT-TYPE SYNTAX INTEGER { ePDFNotEnabled(1), ePDFEnabled(2) } ACCESS read-only STATUS optional DESCRIPTION " Used to tell whether the device supports PDF" ::= { pdl-pdf 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.11 postscript-print-errors OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the time of the error" ::= { pdl-postscript 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.4 pdf-print-errors OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2) } ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the value of the print PDF errors setting. If eOn, PDF prints an error page showing the error encountered and the stack at the time of the error" ::= { pdl-pdf 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.7 default-print-quality OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS optional DESCRIPTION " Returns or sets the default print quality. A value of zero has the lowest print quality. A value of 100 has the highest print quality. Each POS should document what values in the 0 to 100 range are supported" ::= { imaging 7 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.14 postscript-defer-media OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-write STATUS optional DESCRIPTION " This object will be used to enable or disable the use of the Adobe Postscript Paper Handling Model in the printer firmware. By default it is enabled which means that PostScript will always defer the media selection to HP Paper Handling Model" ::= { pdl-postscript 14 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 default-lines-per-page OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return the " ::= { settings-pdl 11 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 default-bits-per-pixel OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Controls the number of levels used (per pixel) when printing grayscale or color images" ::= { settings-pdl 39 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 default-vmi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return " ::= { settings-pdl 12 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13 pcl-default-font-height OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies only to proportional fonts. Point size, in points, can be converted to font height, in centipoints, by multiplying the point size by 100. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return . ''Closest'' means the smallest absolute difference. Additional information: Supported values range from 400 to 99975, in increments of 25 units. Setting to an unsupported value causes the printer to substitute in a snap value and to return status. The snap values are as follow: <=400 snaps to 400 >=99975 snaps to 99975 Unsupported values in the range 400 to 99975 snap DOWN to the previous supported value (i.e 25293 snaps to 25275 or 75038 snaps to 75025)." ::= { pdl-pcl 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14 pcl-default-font-source OBJECT-TYPE SYNTAX INTEGER { eInternal(1), ePermanentSoft(2), eRomSimm1(10), eRomSimm2(11), eRomSimm3(12), eRomSimm4(13), eRomSimm5(14), eUsb1(15), eUsb2(16), eUsb3(17), eUsb4(18) } ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the value of the default font source variable in NVRAM " ::= { pdl-pcl 14 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15 pcl-default-font-number OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an , eclipse " ::= { pdl-pcl 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16 pcl-default-font-width OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only to fixed space fonts. Pitch, in character per inch, can be converted to font width, in centipoints, by dividing 7200 by the pitch. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return . ''Closest'' means the smallest absolute difference. Additional information: Setting to an unsupported value causes the printer to substitue in a snap value (listed below) and return status. The snap values for pitch are as follow: <=44 snaps to 44 >=9999 snaps to 9999" ::= { pdl-pcl 16 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 default-page-protect OBJECT-TYPE SYNTAX INTEGER { eOn(2) } ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If eOn, then memory is reserved. If eAuto, the device determines the amount of memory to reserve. Additional information: Setting to eOn causes MET to be more conservative, but it will not allocate memory to hold an entire rasterized page." ::= { settings-pdl 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 default-horizontal-black-resolution OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the value of the default horizontal black resolution. The units are dots per inch" ::= { settings-pdl 9 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 default-vertical-black-resolution OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the value of the default vertical black resolution. The units are dots per inch" ::= { settings-pdl 8 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.5 default-ret OBJECT-TYPE SYNTAX INTEGER { eOff(1), eLight(2), eMedium(3), eDark(4), eNotSet(5) } ACCESS read-write STATUS optional DESCRIPTION " Returns or changes the Resolution Enhancement Technology setting. Devices that only support eOff and eOn should map all other values to eOn and always return the same non-eOff value to indicate on. The list of supported values should be documented in the device POS" ::= { imaging 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 default-copies OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION " Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are printed. The print job can override this value. The list of supported values should be documented in the device POS" ::= { settings-pdl 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 form-feed OBJECT-TYPE SYNTAX INTEGER { eInitiateAction(1) } ACCESS write-only STATUS optional DESCRIPTION " Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as close page or eject page. If the PDL processing sub-system is in a FORM-FEED-NEEDED state, this causes the device to flush or finish processing the current page of the current job. If the device is not in the FORM-FEED-NEEDED state, an will occur" ::= { settings-pdl 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2.2 form-feed-needed OBJECT-TYPE SYNTAX INTEGER { eFalse(1), eTrue(2) } ACCESS read-only STATUS optional DESCRIPTION " Indicates if the PDL processing sub-system has made marks on the current page and the source subsystem has been idle for a device specific amount of time" ::= { status-pdl 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5.4 pjl-device-access OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-write STATUS optional DESCRIPTION " This object is used to enable or disable PJL device attendance commands,SNMP passthrough commands and environment commands which affect persistent settings on the device.These include OPMSG,RDYMSG,STMSG,DMINFO,DMCMD, DEFAULT,INITIALISE and SET on default same-as-current PJL variables.By default this object is enabled" ::= { pjl 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.3 override-media-size OBJECT-TYPE SYNTAX INTEGER { eUSExecutive(1), eUSLetter(2), eUSLegal(3), eUSEDP(4), eEuropeanEDP(5), eReservedDoNotUse(6), eUSGovernmentLetter(7), eUSGovernmentLegal(8), eFolio(9), eFoolscap(10), eLedger(11), eCSize(12), eDSize(13), eESize(14), eStatement(15), eSuperB(16), eROC16K(17), eJISExecutive(18), eROC8K(19), eISOandJISA10(20), eISOandJISA9(21), eISOandJISA8(22), eISOandJISA7(23), eISOandJISA6(24), eISOandJISA5(25), eISOandJISA4(26), eISOandJISA3(27), eISOandJISA2(28), eISOandJISA1(29), eISOandJISA0(30), eISOandJIS2A0(31), eISOandJIS4A0(32), ePRC8K270X390(33), ePRC16K195X270(34), ePRC8K260X368(35), eJISB10(40), eJISB9(41), eJISB8(42), eJISB7(43), eJISB6(44), eJISB5(45), eJISB4(46), eJISB3(47), eJISB2(48), eJISB1(49), eJISB0(50), eISOB10(60), eISOB9(61), eISOB8(62), eISOB7(63), eISOB6(64), eISOB5(65), eISOB4(66), eISOB3(67), eISOB2(68), eISOB1(69), eISOB0(70), eJapansePostcardSingle(71), eJapansePostcardDouble(72), eISOA6Postcard(73), eIndexCard4x6(74), eIndexCard5x8(75), ePhoto4x6(76), eJapanesePostcardWithTab(77), eIndexCard3x5(78), eMonarch(80), eCommercial10(81), eCatalog(82), eNo10Envelope(83), ePRC16K184X260(89), eInternationalDL(90), eInternationalC5(91), eInternationalC6(92), eInternationalC4(93), eInternationalB5(100), eCustom(101), eEnvelope9(102), eCustomCard(108), eUSEnvelopeA2(109), eJapanseEnvLong3(110), eJapanseEnvLong4(111), eJapaneseEnv2(112), ePhoto10x15(118), ePhotoCabinet(119), ePhotoLSizeCard(121), eIndexCard5x7(122), ePhotoESizeCard(123), ePhotoKGSizeCard(124), ePhoto2ESizeCard(125), ePhoto2LSizeCard(126), eUSExecutiveR(257), eUSLetterR(258), eROC16KR(273), eISOandJISA6R(280), eISOandJISA5R(281), eISOandJISA4R(282), eJISBR6R(300), eJISB5R(301), eStatementR(302), eAnyCustomSize(32764), eAnySize(32765), eCustomRoll(32766), eUnknownMediaSize(32767), eStatementWR(65234), eJISB5WR(65235), eISOandJISA4WR(65254), eISOandJISA5WR(65255), eUSLetterWR(65278), eJISB4W(65490), eJISB5W(65491), eISOandJISA3W(65509), eISOandJISA4W(65510), eISOandJISA5W(65511), eStatementW(65521), eLedgerW(65530), eUSLetterW(65534) } ACCESS read-write STATUS optional DESCRIPTION " Sets the media size that is to be used in place of the currently requested media size" ::= { settings-prt-eng 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.2 override-media-name OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " Sets a string identifying the media name that is to be used in place of the currently requested media. The substitution will continue until another media is selected. If set to a named media that is not currently available the requested media is not overridden" ::= { settings-prt-eng 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.4.1 engine-media-modes-supported1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION " The list of engine media modes supported by the device. The modes are each separated by a comma character. An example string would be: 'Normal,Rough,Low,Vellum'" ::= { media-modes 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.31 finisher-image-rotation OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " This PML object will provide the additional image rotation that is applied to a printed job depending on the presence or absence of a finisher device or the value of the SVM_ALWAYS_MATCH_OUTPUT_ORIENTATION variable" ::= { settings-prt-eng 31 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1.1 current-job-parsing-id OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Contains the printer assigned job identification for the job currently being processed by the processing PDL sub-system. The job ID is a monotonically increasing number. The job ID may be reset to zero at power-up and may roll over to zero after reaching some maximum value" ::= { job-being-parsed 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.10. job-info-stage OBJECT-TYPE SYNTAX INTEGER { cSourceSubsystem(0), cProcessingSubsystem(1), cDestinationSubsystem(2) } ACCESS read-only STATUS optional DESCRIPTION " Indicates what printer sub-systems are currently processing this print job. The last OID field for this dynamic object contains the job ID. cSourceSubsystem - some of the job is in the printer I/O subsystem. cProcessingSubsystem - some of the job is in the printer imaging processing subsystem. cDestinationSubsystem - some of the job is being printed" ::= { job-info 10 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.24. job-info-requested-originals OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The number of requested collated copies. The value was supplied with the job via PJL QTY variable, the PostScript Collate and NumCopies entries in the page device dictionary, or via some other mechansim" ::= { job-info 24 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.25. job-info-page-count-current-original OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " The page number being printed within the current copy of a collated multi-copy job. This value changes when the job-info-pages-printed changes. The job-info-pages-printed indicates the total number of pages printed in the job, while this object indicates the number of pages printed for this copy of a collated multi-copy job" ::= { job-info 25 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.26. job-info-pages-in-original OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Number of pages in a single copy of a collated multi-copy job " ::= { job-info 26 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.27. job-info-printed-originals OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION " Number of collated copies completely printed and delivered to the output bin at time of query" ::= { job-info 27 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.2 print-internal-page OBJECT-TYPE SYNTAX INTEGER { eNotPrintingAnInternalPage(1), ePrintingAnUnknownInternalPage(2), eDeviceDemoPage1ConfigurationPage(3), eDeviceDemoPage2(4), eDeviceDemoPage3SpeedDialPage(5), eDeviceDemoPage4ExtensiveDeviceInformation(6) , eDeviceDemoPage5ErrorLog(7), eDeviceDemoPage6FileSystemDirectoryListing(8), eDeviceDemoPage7MenuMap(9), eDeviceUsagePage(10), eDeviceDemoPage8BlockFaxList(11), eDeviceDemoPage9FaxLogReport(12), eServicePage(13), eServicePageWarningLog(14), eServicePageJamHistory(15), eServicePageServiceSummary(16), eServicePageServiceSettings(17), eServicePagePM(18), ePrintUsagePage(100), eSuppliesPage(101), eMediaPathUsagePage(102), eSuppliesUsagePage(103), eDeviceADFAdjustmentPages(250), eDeviceColorRegistrationPage(251), eDeviceAutoCleaningPage(252), eDeviceCleaningPage(253), eDevicePaperPathTest(254), eDevicePageRegistrationPage(255), ePrintQualityPages(256), eHighVoltageTestPage(257), eColorPaletteRGBPage(258), eColorPaletteCMYKPage(259), eDevicePageDiagnosticsPage(260), eDevicePageStoredJobsPage(261), eSWActivatedRibSmearCleanerPage(262), eSWActivatedPickTireCleanerPage(263), eXPSErrorPage(264), ePCLDemoPage1ConfigurationPage(300), ePCLDemoPage2(301), ePCLFontList1(350), ePCLFontList2(352), ePCLXLFontList(353), ePostScriptDemoPage1ConfigurationPage(400), ePostScriptDemoPage2(401), ePostScriptFontList1(450), ePostScriptFontList2(451), eEscPDemoPage1ConfigurationPage(500), eEscPDemoPage2(501), eEscPFontList1(550), eEscPFontList2(551), eEpsonDemoPage1ConfigurationPage(600), eEpsonDemoPage2(601), eEpsonFontList1(650), eEpsonFontList2(651), eIPDSDemoPage1ConfigurationPage(700), eIPDSDemoPage2(701), eIPDSFontList1(750), eIPDSFontList2(751), eHPGLDemoPage1ConfigurationPage(800), eHPGLDemoPage2(801), eHPGLFontList1(850), eHPGLFontList2(851), eHPGL2DemoPage1ConfigurationPage(900), eHPGL2DemoPage2(901), eHPGL2FontList1(950), eHPGL2FontList2(951), eMarkingAgentTestPattern(1000), eCalibrationNormalPage(1100), eCalibrationPhotoPage(1101), eColorCalibrationPage(1102), eColorCalConfirmPage(1103), ePenAlignmentPage(1150), ePenAlignmentVerificationPage(1151), ePrintSimplifiedAlignmentPage(1152), eNetworkConfigPage(1200), eNetworkConfigMultiLangPage(1201), eWirelessNetworkTestPage(1202), eFaxSelfTestShort(1300), eFaxSelfTestPage(1301), eFaxSelfTestExtended(1302), ePDFEaterErrorPage(1303), eFaxActivityLogPage(1304), eFaxCallReportPage(1305), eFaxCallReportOnEventPage(1306), eBillingReportPage(1307), eSpeedDialListReportPage(1308), eBlockedFaxListReportPage(1309), eT30TracerReportPage(1310), eT30TracerReportOnEventPage(1311), eDeviceShowMeHowPageClearJams(1400), eDeviceShowMeHowPageLoadTrays(1401), eDeviceShowMeHowPageLoadSpecialMedia(1402), eDeviceShowMeHowPagePrintBothSides(1403), eDeviceShowMeHowPageSupportedPaper(1404), eDeviceShowMeHowPageMoreHelp(1405), eDeviceShowMeHowHelpGuide(1406), eAutomaticLinefeedCalibration(1407), eAutomaticColorCalibration(1408), ePrintQualityDiagnosticPage(1409), eCurrentSettingsPage(1410), eDeviceShowMeHowPageLoadMedia4x6(1411), eColorUsageLog(1412) } ACCESS read-write STATUS optional DESCRIPTION " Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generated page. Reading this object provides an indication what internally generated page is currently being printed, if any. The actual page is device specific. Some devices may support continuously printing an internally generated page. Setting this object to eNotPrintingAnInternalPage terminates continuously printing internally generated pages. An internally generated page may not be allowed to be printed at any arbitrary time; under what conditions it will succeed or fail is device specific. If the device supports the requested page, but can not start printing the page when requested, the device will respond with . RECOMMENDATION: If the device is ready (i.e. the NOT-READY-PRINTER object does not contain any items, except maybe being off-line) and is idle (i.e. the NOT-IDLE object does not contain any items), this request should always succeed. This provides a mechanism for driver writers to always determine if the action will succeed or not" ::= { test 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.15 instant-lamp-mode OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-write STATUS optional DESCRIPTION "Indicates whether the 'Instant Lamp On' mode in enabled or not. It returns eDisabled if 'Instant Lamp On' mode is disabled, and eEnabled if 'Instant Lamp On' mode is enabled. The 'Instant Lamp On' mode allows faster scanning by reducing lamp warm up time at the expense of greater energy consumption. " ::= { status-scanner 15 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.102 adf-description OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION"Returns the product DESCRIPTION of the scanner automatic document feeder accessory. " ::= { settings-scanner 102 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.109 adf-maintenance-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The total number of times maintenance has been performed on an automatic document feeder. " ::= { settings-scanner 109 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.108 adf-maintenance-current-state OBJECT-TYPE SYNTAX INTEGER{ cMaintenanceRecommended(0) } ACCESS read-only STATUS optional DESCRIPTION "This PML object returns the current state of the ADF regarding recommended maintenance. For example, some products require that the paper path be cleaned with a cleaning cloth on a periodic basis. The bits are: cMaintenanceRecommended - maintenance of the ADF is recommended when this bit is set. " ::= { settings-scanner 108 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.103 adf-maximum-capacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns the maximum capacity of the Scanner automatic document feeder as specified in ADF-MEASUREMENT-UNITS. If the ADF-MEASUREMENT-UNITS OID is not implemented, then assume it is sheets of 20 pound paper. " ::= { settings-scanner 103 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.104 adf-measurement-units OBJECT-TYPE SYNTAX INTEGER { eOther(2), ePages(5) } ACCESS read-only STATUS optional DESCRIPTION "This object is used to report the units used to measure the maximum capacity of an automatic document feeder. " ::= { settings-scanner 104 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.101 adf-model-number OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Returns the model number of the scanner automatic document feeder accessory. d " ::= { settings-scanner 101 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.110 adf-pages-since-maintenance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The total number of pages fed since the last maintenance was performed on the automatic document feeder. " ::= { settings-scanner 110 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.18 consumable-pages-since-replacement OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The total number of pages fed since the last replacement of the consumable. " ::= { consumables 18 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.16 consumable-replacement-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "The total number of times a consumable has been replaced. " ::= { consumables 16 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.5 scanned-media-total-charge OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "The total charge for pages scanned, for this media size. " ::= { scanned-media-usage 5 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.1 scanned-media-simplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Total number of simplex pages scanned, for this media size. " ::= { scanned-media-usage 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.2 scanned-media-simplex-charge OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Charge for each simplex page printed in this media size. " ::= { scanned-media-usage 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.3 scanned-media-duplex-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Total number of duplex pages scanned, for this media size. " ::= { scanned-media-usage 3 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.4 scanned-media-duplex-charge OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Charge for each duplex page scanned, for this media size. " ::= { scanned-media-usage 4 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.2 usage-scanner-total-charge OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Total scanner charge or cost for all paper sizes scanned. " ::= { scanner-accounting 2 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.89 scan-to-folder-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The number of scan-to-folder scan jobs. " ::= { settings-scanner 89 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.62 scanner-accessory-send-job-scan-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This relates to the number of pages scanned for fax/send. This item is incremented by 2 for each sheet scanned through the ADF in 2-sided scan mode, and it is incremented by 1 for flatbed scans. Scanning for testing and calibration purposes are NOT TO BE INCLUDED in this count. " ::= { settings-scanner 62 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.111 email-service-operational OBJECT-TYPE SYNTAX INTEGER { eNonOperational(1), eOperational(2) } ACCESS read-only STATUS optional DESCRIPTION "To check if Email service is operational on the device. Email is operational if email feature is enabled on the device and the SMTP gateway is configured. " ::= { status-system 111 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.16 fax-billing-code-enabled OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-only STATUS optional DESCRIPTION "To check if Billing Code is enabled on the device for Faxes sent " ::= { status-fax-proc-sub 16 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.18 fax-billing-code OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "The actual Billing Code applicable for Faxes sent from the device " ::= { status-fax-proc-sub 18 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.17 fax-billing-code-minlength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The Minimum number of Billing Code digits that has to be specified for Faxes sent from the device. Range: 1 - 16 " ::= { status-fax-proc-sub 17 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.13 pcfax-send-enabled OBJECT-TYPE SYNTAX INTEGER { eDisabled(1), eEnabled(2) } ACCESS read-only STATUS optional DESCRIPTION "To check if PC Fax Send is enabled on the device. Also used by administrators to enable or disable PC Fax Send on the device " ::= { status-fax-proc-sub 13 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.1.1 background-status-msg-line1-part1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '00 READY'" ::= { background-message1 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.2.1 background-status-msg-line2-part1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION " The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '00 READY'" ::= { background-message2 1 } -- 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.66 control-panel-key-press OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Writing this object simulates pressing a key on the control panel. Reading it will return the last key pressed either on the control panel or via PML. This object obsoletes/replaces CONTROL-PANEL-BUTTON-PRESS object which was unable to represent each of the possible key combinations of our current control panels (ie. Full QWERTY keyboard). The device POS will specify the full range of keys supported by this object." ::= { status-system 66 } END