E5-2690
ZeusIOPS

sd config: see default.conf

setenv JBOD1 /dev/chassis/JBOD1
+ zpool create -o failmode=continue -O compression=on -O atime=off pool1 \
    mirror $JBOD1/SLOT_01_/disk $JBOD1/SLOT_02_/disk \
    mirror $JBOD1/SLOT_03_/disk $JBOD1/SLOT_04_/disk \
    mirror $JBOD1/SLOT_05_/disk $JBOD1/SLOT_06_/disk \
    mirror $JBOD1/SLOT_07_/disk $JBOD1/SLOT_08_/disk \
    mirror $JBOD1/SLOT_09_/disk $JBOD1/SLOT_10_/disk \
    mirror $JBOD1/SLOT_11_/disk $JBOD1/SLOT_12_/disk \
    mirror $JBOD1/SLOT_13_/disk $JBOD1/SLOT_14_/disk \
    mirror $JBOD1/SLOT_15_/disk $JBOD1/SLOT_16_/disk \
    mirror $JBOD1/SLOT_17_/disk $JBOD1/SLOT_18_/disk \
    mirror $JBOD1/SLOT_19_/disk $JBOD1/SLOT_20_/disk \
    mirror $JBOD1/SLOT_21_/disk $JBOD1/SLOT_22_/disk \
    mirror $JBOD1/SLOT_23_/disk $JBOD1/SLOT_24_/disk \
    spare /dev/chassis/SYS/HDD1/disk /dev/chassis/SYS/HDD9/disk \
	log /dev/chassis/SYS/HDD12/disk		# ZeusIOPS

---------------------------------------------------------------------------
compression=on, atime=off, recordsize=128K
---------------------------------------------------------------------------

filebench 1.4.8 (0.175.1.0.0.24.2) as is with 'set $dir=/pool1/test':


---------------------------------------------------------------------------
compression=on, atime=off, recordsize=16K
---------------------------------------------------------------------------

filebench 1.4.8 (0.175.1.0.0.24.2) as is with 'set $dir=/pool1/test':