# qtbase/mkspecs/solaris-g++-64/qmake.conf
#
# qmake configuration for solaris-g++64
#
# The X11 header files used to be broken on Solaris until patches were
# released in early 2001 for Solaris 2.6, 7, and 8. On Solaris 2.5.1
# or non-patched systems -fpermissive works around the incompatibility
# between GCC 2.95 or better and Solaris - but we still get warnings
# because we don't use -isystem.
#
# From the standards(5) manual page:
#   The XNS4 specification is safe for use only in ILP32 (32-bit)
#   environments and should not be used for LP64 (64-bit)
#   application environments. Use XNS5, which has LP64-clean
#   interfaces that are portable across ILP32 and LP64 environments.
#   [...]
#   For platforms supporting the LP64 (64-bit) programming environment
#   where the SC5.0 Compilers have been installed, SUSv2-conforming LP64
#   applications using XNS5 library calls should be built with command
#   lines of the form:
#     c89 $(getconf XBS5_LP64_OFF64_CFLAGS) -D_XOPEN_SOURCE=500 \
#         $(getconf XBS5_LP64_OFF64_LDFLAGS) foo.c -o foo \
#         $(getconf XBS5_LP64_OFF64_LIBS) -lxnet
# So it appears that _XOPEN_SOURCE=500 should be defined when building
# 64-bit applications (on Solaris 7 and better). But then __EXTENSIONS__
# should be defined as well to recover all the default system interface.
#

MAKEFILE_GENERATOR      = UNIX
QMAKE_PLATFORM          = solaris

QMAKE_COMPILER          = gcc

QMAKE_CC                = gcc
QMAKE_LEX               = flex
QMAKE_LEXFLAGS          =
QMAKE_YACC              = yacc
QMAKE_YACCFLAGS         = -d
QMAKE_CFLAGS            = -m64 -march=nocona -std=gnu99 -D_XOPEN_SOURCE=600 -D__EXTENSIONS__ -D_XPG6
QMAKE_CFLAGS_DEPS       = -M
QMAKE_CFLAGS_WARN_ON    = -Wall -W
QMAKE_CFLAGS_WARN_OFF   = -w
QMAKE_CFLAGS_RELEASE    = -O2
QMAKE_CFLAGS_DEBUG      = -g
QMAKE_CFLAGS_SHLIB      = -fPIC
QMAKE_CFLAGS_STATIC_LIB = $$QMAKE_CFLAGS_SHLIB
QMAKE_CFLAGS_YACC       = -Wno-unused -Wno-parentheses
QMAKE_CFLAGS_THREAD     = -D_REENTRANT

QMAKE_CXX               = g++
# -D_XOPEN_SOURCE=600 would require -std=c++11 as well - don't want this yet
QMAKE_CXXFLAGS          = -m64 -march=nocona -D_XOPEN_SOURCE=500 -D__EXTENSIONS__
QMAKE_CXXFLAGS_DEPS     = $$QMAKE_CFLAGS_DEPS
QMAKE_CXXFLAGS_WARN_ON  = $$QMAKE_CFLAGS_WARN_ON
QMAKE_CXXFLAGS_WARN_OFF = $$QMAKE_CFLAGS_WARN_OFF
QMAKE_CXXFLAGS_RELEASE  = $$QMAKE_CFLAGS_RELEASE
QMAKE_CXXFLAGS_DEBUG    = $$QMAKE_CFLAGS_DEBUG
QMAKE_CXXFLAGS_SHLIB    = $$QMAKE_CFLAGS_SHLIB
QMAKE_CXXFLAGS_STATIC_LIB = $$QMAKE_CFLAGS_STATIC_LIB
QMAKE_CXXFLAGS_YACC     = $$QMAKE_CFLAGS_YACC
QMAKE_CXXFLAGS_THREAD   = $$QMAKE_CFLAGS_THREAD

QMAKE_INCDIR            =
QMAKE_LIBDIR            = 
QMAKE_INCDIR_X11        = /usr/X11/include
QMAKE_LIBDIR_X11        = /usr/X11/lib/64
QMAKE_INCDIR_OPENGL     = /usr/X11/include
QMAKE_LIBDIR_OPENGL     = /usr/X11/lib/64

QMAKE_LFLAGS            = -m64 -march=nocona 
QMAKE_LFLAGS_SONAME     = -h$$LITERAL_WHITESPACE 

QMAKE_LIBS              = 
QMAKE_LIBS_DYNLOAD      =  
QMAKE_LIBS_X11          = -lXext -lX11
QMAKE_LIBS_NIS          = 
QMAKE_LIBS_OPENGL       = -lGL 
QMAKE_LIBS_THREAD       = 
QMAKE_LIBS_NETWORK      = -lsocket -lnsl 

QMAKE_AR                = ar cq
QMAKE_OBJCOPY           = objcopy
QMAKE_NM                = nm -P
QMAKE_RANLIB            =

#QMAKE_STRIP             = strip
#QMAKE_STRIPFLAGS_LIB   += --strip-unneeded
QMAKE_INSTALL_FILE      = ginstall -m 644 -p
QMAKE_INSTALL_PROGRAM   = ginstall -m 755 -p

include(../common/unix.conf)

include(../common/gcc-base.conf)
# reset invalid changes from gcc-base.conf
QMAKE_CXXFLAGS			= -m64 -march=nocona -D_XOPEN_SOURCE=500 -D__EXTENSIONS__
QMAKE_LFLAGS_RPATH		= -L

include(../common/g++-unix.conf)
# g++-unix.conf adds invalid flags - so reset
QMAKE_LFLAGS_NOUNDEF	= -Wl,-zdefs -Wl,-Bdirect
QMAKE_LFLAGS_RELEASE	= $$QMAKE_LFLAGS_NOUNDEF
QMAKE_LFLAGS_RELEASE_WITH_DEBUGINFO	= $$QMAKE_LFLAGS_NOUNDEF
QMAKE_LFLAGS_DEBUG		= $$QMAKE_LFLAGS_NOUNDEF

# no clue, where these one gets redefined
QMAKE_LFLAGS_SHLIB		= -shared
QMAKE_CFLAGS_SHLIB		= -fPIC
QMAKE_CFLAGS_STATIC_LIB	= $$QMAKE_CFLAGS_SHLIB
QMAKE_LFLAGS_PLUGIN		= $$QMAKE_LFLAGS_SHLIB
QMAKE_CXXFLAGS_SHLIB	= $$QMAKE_CFLAGS_SHLIB


load(qt_config)